[U-Boot] [U-Boot, v2, 3/3] arm, at91: support for sam9260 based smwartweb board

[Heiko Schocher]

Hello Tom,

Am 13.08.2015 um 15:17 schrieb Tom Rini:
> On Mon, Jun 29, 2015 at 09:10:48AM +0200, Heiko Schocher wrote:
>
>> add support for the at91sam9260 based board smartweb from
>> siemens. SPL is used without serial support, as this
>> SoC has only 4k sram for running SPL. Here a U-Boot
>> bootlog:
>>
>> RomBOOT
>>>
>>
>> U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200)
>>
>> CPU: AT91SAM9260
>> Crystal frequency:   18.432 MHz
>> CPU clock        :  198.656 MHz
>> Master clock     :   99.328 MHz
>>         Watchdog enabled
>> DRAM:  64 MiB
>> WARNING: Caches not enabled
>> NAND:  256 MiB
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   macb0
>> Hit any key to stop autoboot:  0
>> U-Boot>
>>
>> Signed-off-by: Heiko Schocher <hs at denx.de>
>
> Applied to u-boot/master, thanks!

Thanks!

@Andreas: Do you find time for my other at91 board patches pending?

Here my current open patches list (except the at91 dfu support patches)

  Patchwork [U-Boot] arm, at91: add axm extensions
https://patchwork.ozlabs.org/patch/484257/

------------------------------------
corvus:

  Patchwork [U-Boot] corvus, dfu: add dfu support
https://patchwork.ozlabs.org/patch/484261/

  Patchwork [U-Boot] at91: corvus: board updates
https://patchwork.ozlabs.org/patch/484262/

------------------------------------
taurus:

  Patchwork [U-Boot] taurus: board updates
https://patchwork.ozlabs.org/patch/484292/


bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany