[U-Boot] [U-Boot, v2, 3/3] arm, at91: support for sam9260 based smwartweb board

[Tom Rini]

On Mon, Jun 29, 2015 at 09:10:48AM +0200, Heiko Schocher wrote:

> add support for the at91sam9260 based board smartweb from
> siemens. SPL is used without serial support, as this
> SoC has only 4k sram for running SPL. Here a U-Boot
> bootlog:
> 
> RomBOOT
> >
> 
> U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200)
> 
> CPU: AT91SAM9260
> Crystal frequency:   18.432 MHz
> CPU clock        :  198.656 MHz
> Master clock     :   99.328 MHz
>        Watchdog enabled
> DRAM:  64 MiB
> WARNING: Caches not enabled
> NAND:  256 MiB
> In:    serial
> Out:   serial
> Err:   serial
> Net:   macb0
> Hit any key to stop autoboot:  0
> U-Boot>
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150813/feb55796/attachment.sig>