[U-Boot] [PATCH 4/5] video: cfb_console: Allow VGA device to work without i8042 keyboard

Bin Meng bmeng.cn at gmail.com
Tue Aug 18 04:31:06 CEST 2015


On Tue, Aug 18, 2015 at 10:00 AM, Simon Glass <sjg at chromium.org> wrote:
> +Anatolij
>
> Hi Bin,
>
> On 17 August 2015 at 04:45, Bin Meng <bmeng.cn at gmail.com> wrote:
>> So far if CONFIG_VGA_AS_SINGLE_DEVICE is not defined, the VGA device
>> will try to initialize a keyboard device (for x86, it is i8042). But
>> if i8042 controller initialization fails (eg: there is no keyboard
>> connected to the PS/2 port), drv_video_init() just simply returns.
>> This kills the opportunity of using a usb keyboard later with the vga
>> concole, as the vga initialization part is actually ok, only keyboard
>
> console

Will fix in v2.

>
>> part fails. Change the code logic to allow this.
>
> This is a change in behaviour. It seems OK to me though. In fact this
> problem annoyed me quite recently.
>
>>
>> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>>
>> ---
>> In the long term, we should remove CONFIG_VGA_AS_SINGLE_DEVICE and
>> treat the cfb_concole an output device only. The keyboard part should
>> be moved out of cfb_console driver and be as a input device driver
>> separately.
>
> Agreed. Actually we should implement driver model for vga/lcd and input.

Yes, I was planning to do. But that's a lot work so I decided not to
change it in this series.

>
>>
>>  drivers/video/cfb_console.c | 11 +++++------
>>  1 file changed, 5 insertions(+), 6 deletions(-)
>
> Reviewed-by: Simon Glass <sjg at chromium.org>
>
>>
>> diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
>> index 30e0317..aa7ca86 100644
>> --- a/drivers/video/cfb_console.c
>> +++ b/drivers/video/cfb_console.c
>> @@ -2247,16 +2247,17 @@ __weak int board_video_skip(void)
>>
>>  int drv_video_init(void)
>>  {
>> -       int skip_dev_init;
>>         struct stdio_dev console_dev;
>>         bool have_keyboard;
>> +       bool __maybe_unused keyboard_ok = false;
>>
>>         /* Check if video initialization should be skipped */
>>         if (board_video_skip())
>>                 return 0;
>>
>>         /* Init video chip - returns with framebuffer cleared */
>> -       skip_dev_init = (video_init() == -1);
>> +       if (video_init() == -1)
>> +               return 0;
>>
>>         if (board_cfb_skip())
>>                 return 0;
>> @@ -2272,11 +2273,9 @@ int drv_video_init(void)
>>         if (have_keyboard) {
>>                 debug("KBD: Keyboard init ...\n");
>>  #if !defined(CONFIG_VGA_AS_SINGLE_DEVICE)
>> -               skip_dev_init |= (VIDEO_KBD_INIT_FCT == -1);
>> +               keyboard_ok = !(VIDEO_KBD_INIT_FCT == -1);
>>  #endif
>>         }
>> -       if (skip_dev_init)
>> -               return 0;
>>
>>         /* Init vga device */
>>         memset(&console_dev, 0, sizeof(console_dev));
>> @@ -2287,7 +2286,7 @@ int drv_video_init(void)
>>         console_dev.puts = video_puts;  /* 'puts' function */
>>
>>  #if !defined(CONFIG_VGA_AS_SINGLE_DEVICE)
>> -       if (have_keyboard) {
>> +       if (have_keyboard && keyboard_ok) {
>>                 /* Also init console device */
>>                 console_dev.flags |= DEV_FLAGS_INPUT;
>>                 console_dev.tstc = VIDEO_TSTC_FCT;      /* 'tstc' function */
>> --

Regards,
Bin


More information about the U-Boot mailing list