[U-Boot] [RESEND PATCH v4 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity

Vikas Manocha vikas.manocha at st.com
Tue Aug 25 21:45:33 CEST 2015


plat->ahbbase renamed to plat->flashbase for better clarity.

Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
---

Changes in v4: new

 drivers/spi/cadence_qspi.c     |    8 ++++----
 drivers/spi/cadence_qspi.h     |    4 ++--
 drivers/spi/cadence_qspi_apb.c |    4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 0d1abc8..c63f583 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -150,7 +150,7 @@ static int cadence_spi_probe(struct udevice *bus)
 	struct cadence_spi_priv *priv = dev_get_priv(bus);
 
 	priv->regbase = plat->regbase;
-	priv->ahbbase = plat->ahbbase;
+	priv->flashbase = plat->flashbase;
 
 	if (!priv->qspi_is_init) {
 		cadence_qspi_apb_controller_init(plat);
@@ -289,7 +289,7 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
 	}
 
 	plat->regbase = (void *)data[0];
-	plat->ahbbase = (void *)data[2];
+	plat->flashbase = (void *)data[2];
 	plat->trigger_base = (u32 *)fdtdec_get_addr(blob, node,
 						    "cdns,trigger-address");
 
@@ -313,8 +313,8 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
 	plat->tslch_ns = fdtdec_get_int(blob, subnode, "tslch-ns", 20);
 	plat->sram_size = fdtdec_get_int(blob, node, "sram-size", 128);
 
-	debug("%s: regbase=%p ahbbase=%p trigger_base=%p max-frequency=%d page-size=%d\n",
-	      __func__, plat->regbase, plat->ahbbase, plat->trigger_base,
+	debug("%s: regbase=%p flashbase=%p trigger_base=%p max-frequency=%d page-size=%d\n",
+	      __func__, plat->regbase, plat->flashbase, plat->trigger_base,
 	      plat->max_hz, plat->page_size);
 	return 0;
 }
diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h
index 2f1bd92..7341339 100644
--- a/drivers/spi/cadence_qspi.h
+++ b/drivers/spi/cadence_qspi.h
@@ -17,7 +17,7 @@
 struct cadence_spi_platdata {
 	unsigned int	max_hz;
 	void		*regbase;
-	void		*ahbbase;
+	void		*flashbase;
 	void		*trigger_base;
 
 	u32		page_size;
@@ -31,7 +31,7 @@ struct cadence_spi_platdata {
 
 struct cadence_spi_priv {
 	void		*regbase;
-	void		*ahbbase;
+	void		*flashbase;
 	size_t		cmd_len;
 	u8		cmd_buf[32];
 	size_t		data_len;
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index 8156b2b..2638f00 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -704,7 +704,7 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
 
 	/* Get address */
 	addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
-	writel((u32)plat->ahbbase + addr_value,
+	writel((u32)plat->flashbase + addr_value,
 	       plat->regbase + CQSPI_REG_INDIRECTRDSTARTADDR);
 
 	/* The remaining lenght is dummy bytes. */
@@ -795,7 +795,7 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
 
 	/* Setup write address. */
 	reg = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
-	writel((u32)plat->ahbbase + reg,
+	writel((u32)plat->flashbase + reg,
 	       plat->regbase + CQSPI_REG_INDIRECTWRSTARTADDR);
 
 	reg = readl(plat->regbase + CQSPI_REG_SIZE);
-- 
1.7.9.5



More information about the U-Boot mailing list