[U-Boot] tftpserver in uboot

[Heiko Schocher]

Hello Ravi,

Am 13.08.2015 um 20:40 schrieb Ravi Koganti:
>
> Hi
>
> I added tftpserver command in uboot. but here we have to give the tftpsrv command with load address. then only it loads the binary file from client side(nothing but PC) into the board at that particular address.but what my goal is with out  accessing on board side i have to keep binary file into particular address and it has to start execution automatically in board. means previously after giving tftpsrv command in uboot tftpserver is starting but my goal is after powering up the board tftpserver should automatically activated. can anybody please let me know the process.

Did you read u-boot:doc/README.autoboot ?

bye,
Heiko

>
> Thanks
> Ravi
>
> The information contained in this email and any attachments is confidential and may be subject to copyright or other intellectual property protection. If you are not the intended recipient, you are not authorized to use or disclose this information, and we request that you notify us by reply mail or telephone and delete the original message from your mail system.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany