[U-Boot] [PATCH v2 07/10] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000

[Bin Meng]

Since E1000 driver has been converted to driver model, enable it
on Intel Crown Bay. But the Intel Topcliff GbE driver has not been
converted to driver model yet, disable it for now.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

Changes in v2: None

 board/intel/crownbay/crownbay.c | 6 ------
 configs/crownbay_defconfig      | 2 +-
 include/configs/crownbay.h      | 1 -
 3 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/board/intel/crownbay/crownbay.c b/board/intel/crownbay/crownbay.c
index d6de9fa..3a79e69 100644
--- a/board/intel/crownbay/crownbay.c
+++ b/board/intel/crownbay/crownbay.c
@@ -7,7 +7,6 @@
 #include <common.h>
 #include <asm/ibmpc.h>
 #include <asm/pnp_def.h>
-#include <netdev.h>
 #include <smsc_lpc47m.h>
 
 int board_early_init_f(void)
@@ -24,8 +23,3 @@ void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
 {
 	return;
 }
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
index 6edd710..f027faf 100644
--- a/configs/crownbay_defconfig
+++ b/configs/crownbay_defconfig
@@ -19,7 +19,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_CPU=y
 CONFIG_DM_PCI=y
 CONFIG_SPI_FLASH=y
-CONFIG_NETDEVICES=y
+CONFIG_DM_ETH=y
 CONFIG_E1000=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
index 998da78..a344c85 100644
--- a/include/configs/crownbay.h
+++ b/include/configs/crownbay.h
@@ -50,7 +50,6 @@
 #define CONFIG_CMD_MMC
 
 /* Topcliff Gigabit Ethernet */
-#define CONFIG_PCH_GBE
 #define CONFIG_PHYLIB
 
 /* Environment configuration */
-- 
1.8.2.1