[U-Boot] [PATCH V5 2/6] imx: mx6: ccm: Change the clock settings for i.MX6QP
Stefano Babic
sbabic at denx.de
Sun Aug 2 10:44:38 CEST 2015
On 11/07/2015 05:38, Peng Fan wrote:
> Since i.MX6QP changes some CCM registers, so modify the clocks settings to
> follow the hardware changes.
>
> In c files, use runtime check and discard #ifdef.
>
> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> Signed-off-by: Ye.Li <B37916 at freescale.com>
> Reviewed-by: Fabio Estevam <fabio.estevam at freescale.com>
> Acked-by: Stefano Babic <sbabic at denx.de>
> ---
>
> Changes v5:
> Add Stefano's Acked-by
>
> Changes v4:
> Add Fabio's Reviewed-by
>
> Changes v3:
> Move bit definition to crm_regs.h.
>
> Changes v2:
> 1. Remove #ifdef, but use runtime check
> 2. A few bit definitions are introduced in c files, because to other platforms
> the macro will make compilation fail, also there are no other places refer
> the bit macro definitions.
>
> arch/arm/cpu/armv7/mx6/clock.c | 30 +++++++++++++-------
> arch/arm/cpu/armv7/mx6/soc.c | 5 +++-
> arch/arm/include/asm/arch-mx6/crm_regs.h | 48 +++++++++++++++++---------------
> 3 files changed, 49 insertions(+), 34 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index b461898..cd4bfdd 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -310,10 +310,12 @@ static u32 get_ipg_per_clk(void)
> u32 reg, perclk_podf;
>
> reg = __raw_readl(&imx_ccm->cscmr1);
> -#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
> - if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
> - return MXC_HCLK; /* OSC 24Mhz */
> -#endif
> + if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
> + is_mx6dqp()) {
> + if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
> + return MXC_HCLK; /* OSC 24Mhz */
> + }
> +
> perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
>
> return get_ipg_clk() / (perclk_podf + 1);
> @@ -324,10 +326,13 @@ static u32 get_uart_clk(void)
> u32 reg, uart_podf;
> u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
> reg = __raw_readl(&imx_ccm->cscdr1);
> -#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
> - if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
> - freq = MXC_HCLK;
> -#endif
> +
> + if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
> + is_mx6dqp()) {
> + if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
> + freq = MXC_HCLK;
> + }
> +
> reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
> uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
>
> @@ -339,8 +344,13 @@ static u32 get_cspi_clk(void)
> u32 reg, cspi_podf;
>
> reg = __raw_readl(&imx_ccm->cscdr2);
> - reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
> - cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
> + cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
> + MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
> +
> + if (is_mx6dqp()) {
> + if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
> + return MXC_HCLK / (cspi_podf + 1);
> + }
>
> return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
> }
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index d3a3b2e..e80c09c 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -342,9 +342,12 @@ static void set_ahb_rate(u32 val)
> static void clear_mmdc_ch_mask(void)
> {
> struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> + u32 reg;
> + reg = readl(&mxc_ccm->ccdr);
>
> /* Clear MMDC channel mask */
> - writel(0, &mxc_ccm->ccdr);
> + reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
> + writel(reg, &mxc_ccm->ccdr);
> }
>
> static void init_bandgap(void)
> diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
> index 98415ac..7d9fe73 100644
> --- a/arch/arm/include/asm/arch-mx6/crm_regs.h
> +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
> @@ -123,6 +123,8 @@ struct mxc_ccm_reg {
> /* Define the bits in register CCDR */
> #define MXC_CCM_CCDR_MMDC_CH1_HS_MASK (1 << 16)
> #define MXC_CCM_CCDR_MMDC_CH0_HS_MASK (1 << 17)
> +/* Exists on i.MX6QP */
> +#define MXC_CCM_CCDR_MMDC_CH1_AXI_ROOT_CG (1 << 18)
>
> /* Define the bits in register CSR */
> #define MXC_CCM_CSR_COSC_READY (1 << 5)
> @@ -195,10 +197,8 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_OFFSET 8
> #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK (0x3 << 4)
> #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET 4
> -#ifndef CONFIG_MX6SX
> -#define MXC_CCM_CBCMR_GPU3D_AXI_CLK_SEL (1 << 1)
> -#define MXC_CCM_CBCMR_GPU2D_AXI_CLK_SEL (1 << 0)
> -#endif
> +/* Exists on i.MX6QP */
> +#define MXC_CCM_CBCMR_PRE_CLK_SEL (1 << 1)
>
> /* Define the bits in register CSCMR1 */
> #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK (0x3 << 29)
> @@ -229,10 +229,10 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK (0x7 << 7)
> #define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET 7
> #endif
> -#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
> -#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
> +/* CSCMR1_PER_CLK exists on i.MX6SX/SL/QP */
> +#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
> #define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET 6
> -#endif
> +
> #define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F
>
> /* Define the bits in register CSCMR2 */
> @@ -244,15 +244,12 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET 19
> #define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV (1 << 11)
> #define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV (1 << 10)
> -#ifdef CONFIG_MX6SX
> +/* CSCMR1_CAN_CLK exists on i.MX6SX/QP */
> #define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3 << 8)
> #define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 8
> +
> #define MXC_CCM_CSCMR2_CAN_CLK_PODF_MASK (0x3F << 2)
> #define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2
> -#else
> -#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3F << 2)
> -#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 2
> -#endif
>
> /* Define the bits in register CSCDR1 */
> #ifndef CONFIG_MX6SX
> @@ -273,16 +270,10 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6
> #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
> #endif
> -#ifdef CONFIG_MX6SL
> -#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F
> -#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
> -#else
> #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
> -#ifdef CONFIG_MX6SX
> -#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
> -#endif
> -#endif
> #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
> +/* UART_CLK_SEL exists on i.MX6SL/SX/QP */
> +#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
>
> /* Define the bits in register CS1CDR */
> #define MXC_CCM_CS1CDR_ESAI_CLK_PODF_MASK (0x3F << 25)
> @@ -316,9 +307,14 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK (0x7 << 18)
> #define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET 18
> #define MXC_CCM_CS2CDR_ENFC_CLK_PRED(v) (((v) & 0x7) << 18)
> -#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16)
> -#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16
> -#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16)
> +
> +#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK \
> + (is_mx6dqp() ? (0x7 << 15) : (0x3 << 16))
> +#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET \
> + (is_mx6dqp() ? 15 : 16)
> +#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) \
> + (is_mx6dqp() ? (((v) & 0x7) << 15) : (((v) & 0x3) << 16))
> +
> #endif
> #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12)
> #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12
> @@ -384,6 +380,9 @@ struct mxc_ccm_reg {
> /* Define the bits in register CSCDR2 */
> #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19)
> #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19
> +/* ECSPI_CLK_SEL exists on i.MX6SX/SL/QP */
> +#define MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK (0x1 << 18)
> +
> /* All IPU2_DI1 are LCDIF1 on MX6SX */
> #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15)
> #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15
> @@ -728,6 +727,9 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CCGR5_SAI2_MASK (3 << MXC_CCM_CCGR5_SAI2_OFFSET)
> #endif
>
> +/* PRG_CLK0 exists on i.MX6QP */
> +#define MXC_CCM_CCGR6_PRG_CLK0_MASK (3 << 24)
> +
> #define MXC_CCM_CCGR6_USBOH3_OFFSET 0
> #define MXC_CCM_CCGR6_USBOH3_MASK (3 << MXC_CCM_CCGR6_USBOH3_OFFSET)
> #define MXC_CCM_CCGR6_USDHC1_OFFSET 2
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list