[U-Boot] [PATCH V5 1/6] imx: add cpu type for i.MX6QP/DP

Stefano Babic sbabic at denx.de
Sun Aug 2 10:44:29 CEST 2015


On 11/07/2015 05:38, Peng Fan wrote:
> Add cpu type for i.MX6QP/DP.
> 
> This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP
> and MXC_CPU_MX6DP, we should use:
> (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)).
> 
> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> Acked-by: Stefano Babic <sbabic at denx.de>
> ---
> 
> Changes v5:
>  Refine commit msg
>  Add Stefano's Acked-by
> 
> Changes v4:
>  Address Fabio's comments, Change Quad-Plus to Dual-Plus for i.MX6DP.
> 
> Changes v3:
>  New patch
>  This patch is to make print_cpuinfo display correct cpu info,and fix is_mx6dqp
> 
> Changes v2:
>  none
> 
>  arch/arm/cpu/armv7/mx6/soc.c              | 11 +++++++++--
>  arch/arm/imx-common/cpu.c                 |  4 ++++
>  arch/arm/include/asm/arch-imx/cpu.h       |  2 ++
>  arch/arm/include/asm/arch-mx6/sys_proto.h |  4 +---
>  4 files changed, 16 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index 29de624..d3a3b2e 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -62,12 +62,12 @@ u32 get_cpu_rev(void)
>  	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
>  	u32 reg = readl(&anatop->digprog_sololite);
>  	u32 type = ((reg >> 16) & 0xff);
> -	u32 major;
> +	u32 major, cfg = 0;
>  
>  	if (type != MXC_CPU_MX6SL) {
>  		reg = readl(&anatop->digprog);
>  		struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
> -		u32 cfg = readl(&scu->config) & 3;
> +		cfg = readl(&scu->config) & 3;
>  		type = ((reg >> 16) & 0xff);
>  		if (type == MXC_CPU_MX6DL) {
>  			if (!cfg)
> @@ -81,6 +81,13 @@ u32 get_cpu_rev(void)
>  
>  	}
>  	major = ((reg >> 8) & 0xff);
> +	if ((major >= 1) &&
> +	    ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) {
> +		major--;
> +		type = MXC_CPU_MX6QP;
> +		if (cfg == 1)
> +			type = MXC_CPU_MX6DP;
> +	}
>  	reg &= 0xff;		/* mx6 silicon revision */
>  	return (type << 12) | (reg + (0x10 * (major + 1)));
>  }
> diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
> index 5e56cfe..096d22e 100644
> --- a/arch/arm/imx-common/cpu.c
> +++ b/arch/arm/imx-common/cpu.c
> @@ -122,6 +122,10 @@ unsigned imx_ddr_size(void)
>  const char *get_imx_type(u32 imxtype)
>  {
>  	switch (imxtype) {
> +	case MXC_CPU_MX6QP:
> +		return "6QP";	/* Quad-Plus version of the mx6 */
> +	case MXC_CPU_MX6DP:
> +		return "6DP";	/* Dual-Plus version of the mx6 */
>  	case MXC_CPU_MX6Q:
>  		return "6Q";	/* Quad-core version of the mx6 */
>  	case MXC_CPU_MX6D:
> diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
> index 4715f4e..99e0e32 100644
> --- a/arch/arm/include/asm/arch-imx/cpu.h
> +++ b/arch/arm/include/asm/arch-imx/cpu.h
> @@ -12,6 +12,8 @@
>  #define MXC_CPU_MX6Q		0x63
>  #define MXC_CPU_MX6D		0x64
>  #define MXC_CPU_MX6SOLO		0x65 /* dummy ID */
> +#define MXC_CPU_MX6DP		0x68
> +#define MXC_CPU_MX6QP		0x69
>  
>  #define CS0_128					0
>  #define CS0_64M_CS1_64M				1
> diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
> index 28c77a4..eee8ca8 100644
> --- a/arch/arm/include/asm/arch-mx6/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
> @@ -30,9 +30,7 @@ const char *get_imx_type(u32 imxtype);
>  unsigned imx_ddr_size(void);
>  void set_chipselect_size(int const);
>  
> -#define is_mx6dqp() ((is_cpu_type(MXC_CPU_MX6Q) || \
> -		     is_cpu_type(MXC_CPU_MX6D)) && \
> -		     (soc_rev() >= CHIP_REV_2_0))
> +#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
>  
>  /*
>   * Initializes on-chip ethernet controllers.
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list