[U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver

[Simon Glass]

Hi Marek,

On 10 August 2015 at 07:57, Marek Vasut <marex at denx.de> wrote:
> On Monday, August 10, 2015 at 03:39:33 PM, Simon Glass wrote:
>> Hi Marek,
>
> Hi Simon,
>
>> On 2 August 2015 at 17:52, Simon Glass <sjg at chromium.org> wrote:
>> > On 2 August 2015 at 17:15, Marek Vasut <marex at denx.de> wrote:
>> >> Add Kconfig entries for the simple-bus driver, both for U-Boot
>> >> and for SPL. The simple-bus is enabled by default in U-Boot and
>> >> disabled by default in SPL to preserve the original behavior.
>> >>
>> >> Signed-off-by: Marek Vasut <marex at denx.de>
>> >> Cc: Simon Glass <sjg at chromium.org>
>> >> ---
>> >>
>> >>  drivers/core/Kconfig  | 15 +++++++++++++++
>> >>  drivers/core/Makefile |  5 ++---
>> >>  2 files changed, 17 insertions(+), 3 deletions(-)
>> >
>> > Acked-by: Simon Glass <sjg at chromium.org>
>>
>> I can't apply this right now as it breaks most tegra boards. We use a
>> hack at present where we #undef things in config_uncmd_spl.h and that
>> isn't visible to the Makefiles.
>>
>> Assuming that Tom applies Masahiro's Kconfig improvements for SPL we
>> can do it then.
>
> Agh, OK, thanks for the heads up.
>
> I hope this makes it into 2015.10, otherwise the SPL support for SoCFPGA
> will be completely useless.

One way or another we'll figure this out sooner rather than later.

Regards,
Simon