[U-Boot] [PATCH 2/4] armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info
Prabhakar Kushwaha
prabhakar at freescale.com
Fri Aug 7 14:46:39 CEST 2015
Every QSGMII SerDes Protocol usage 4 MACs.
So add/repeat QSGMII information for 4 MACs in dpmac_info strucuture.
Signed-off-by: King Chung Lo at freescale.com <KingChungLo at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c | 33 ++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c
index 02ca126..ae08343 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c
@@ -90,7 +90,38 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
else {
serdes_prtcl_map[lane_prtcl] = 1;
#ifdef CONFIG_FSL_MC_ENET
- wriop_init_dpmac(sd, lane + 1, (int)lane_prtcl);
+ switch (lane_prtcl) {
+ case QSGMII_A:
+ wriop_init_dpmac(sd, 5, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 6, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 7, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 8, (int)lane_prtcl);
+ break;
+ case QSGMII_B:
+ wriop_init_dpmac(sd, 1, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 2, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 3, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 4, (int)lane_prtcl);
+ break;
+ case QSGMII_C:
+ wriop_init_dpmac(sd, 13, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 14, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 15, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 16, (int)lane_prtcl);
+ break;
+ case QSGMII_D:
+ wriop_init_dpmac(sd, 9, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 10, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 11, (int)lane_prtcl);
+ wriop_init_dpmac(sd, 12, (int)lane_prtcl);
+ break;
+ default:
+ if (lane_prtcl >= SGMII1 &&
+ lane_prtcl <= SGMII16)
+ wriop_init_dpmac(sd, lane + 1,
+ (int)lane_prtcl);
+ break;
+ }
#endif
}
}
--
1.9.1
More information about the U-Boot
mailing list