[U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu
Paul Kocialkowski
contact at paulk.fr
Sat Aug 1 11:08:10 CEST 2015
Hi,
Le lundi 27 juillet 2015 à 14:33 +0200, Paul Kocialkowski a écrit :
> Le dimanche 26 juillet 2015 à 02:46 +0900, Masahiro Yamada a écrit :
> > The menuconfig for drivers are getting more and more cluttered
> > and unreadable because too many entries are displayed in a single
> > flat menu. Use hierarchic menu for each category.
>
> That looks like a valuable addition to me!
This patch was submitted a week ago and I need it for merging another
series of mine, that was already accepted.
Is there anything preventing this patch from being merged at this point?
Thanks!
> I had started dealing with the USB side of this in a series currently
> under review. I'll drop the USB bits from my series and base the next
> version on top of this patch.
>
> Thanks!
>
> > Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> > ---
> >
> > drivers/core/Kconfig | 4 ++++
> > drivers/crypto/Kconfig | 4 ++++
> > drivers/demo/Kconfig | 4 ++++
> > drivers/gpio/Kconfig | 8 ++++++++
> > drivers/i2c/Kconfig | 8 ++++++++
> > drivers/led/Kconfig | 4 ++++
> > drivers/misc/Kconfig | 8 ++++++++
> > drivers/rtc/Kconfig | 8 ++++++++
> > drivers/serial/Kconfig | 8 ++++++++
> > drivers/sound/Kconfig | 4 ++++
> > drivers/usb/Kconfig | 8 ++++++++
> > drivers/video/Kconfig | 8 ++++++++
> > 12 files changed, 76 insertions(+)
> >
> > diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
> > index e40372d..9cc888d 100644
> > --- a/drivers/core/Kconfig
> > +++ b/drivers/core/Kconfig
> > @@ -1,3 +1,5 @@
> > +menu "Generic Driver Options"
> > +
> > config DM
> > bool "Enable Driver Model"
> > help
> > @@ -59,3 +61,5 @@ config DM_SEQ_ALIAS
> > Most boards will have a '/aliases' node containing the path to
> > numbered devices (e.g. serial0 = &serial0). This feature can be
> > disabled if it is not required, to save code space in SPL.
> > +
> > +endmenu
> > diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> > index bd26a2b..1ea116b 100644
> > --- a/drivers/crypto/Kconfig
> > +++ b/drivers/crypto/Kconfig
> > @@ -1 +1,5 @@
> > +menu "Hardware crypto devices"
> > +
> > source drivers/crypto/fsl/Kconfig
> > +
> > +endmenu
> > diff --git a/drivers/demo/Kconfig b/drivers/demo/Kconfig
> > index 7a8ce18..98bb633 100644
> > --- a/drivers/demo/Kconfig
> > +++ b/drivers/demo/Kconfig
> > @@ -1,3 +1,5 @@
> > +menu "Demo for driver model"
> > +
> > config DM_DEMO
> > bool "Enable demo uclass support"
> > depends on DM
> > @@ -24,3 +26,5 @@ config DM_DEMO_SHAPE
> > a shape when the 'demo hello' command is executed which targets
> > this device. It can be used to help understand how driver model
> > works.
> > +
> > +endmenu
> > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> > index 0c43777..5934597 100644
> > --- a/drivers/gpio/Kconfig
> > +++ b/drivers/gpio/Kconfig
> > @@ -1,3 +1,9 @@
> > +#
> > +# GPIO infrastructure and drivers
> > +#
> > +
> > +menu "GPIO Support"
> > +
> > config DM_GPIO
> > bool "Enable Driver Model for GPIO drivers"
> > depends on DM
> > @@ -42,3 +48,5 @@ config VYBRID_GPIO
> > default n
> > help
> > Say yes here to support Vybrid vf610 GPIOs.
> > +
> > +endmenu
> > diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
> > index 86fb36b..b8b2250 100644
> > --- a/drivers/i2c/Kconfig
> > +++ b/drivers/i2c/Kconfig
> > @@ -1,3 +1,9 @@
> > +#
> > +# I2C subsystem configuration
> > +#
> > +
> > +menu "I2C support"
> > +
> > config DM_I2C
> > bool "Enable Driver Model for I2C drivers"
> > depends on DM
> > @@ -73,3 +79,5 @@ config SYS_I2C_UNIPHIER_F
> > help
> > Support for UniPhier FIFO-builtin I2C controller driver.
> > This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
> > +
> > +endmenu
> > diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
> > index de5feea..b21bc94 100644
> > --- a/drivers/led/Kconfig
> > +++ b/drivers/led/Kconfig
> > @@ -1,3 +1,5 @@
> > +menu "LED Support"
> > +
> > config LED
> > bool "Enable LED support"
> > depends on DM
> > @@ -24,3 +26,5 @@ config LED_GPIO
> > GPIOs may be on the SoC or some other device which provides GPIOs.
> > The GPIO driver must used driver model. LEDs are configured using
> > the device tree.
> > +
> > +endmenu
> > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> > index 3b7f76a..f29a169 100644
> > --- a/drivers/misc/Kconfig
> > +++ b/drivers/misc/Kconfig
> > @@ -1,3 +1,9 @@
> > +#
> > +# Multifunction miscellaneous devices
> > +#
> > +
> > +menu "Multifunction device drivers"
> > +
> > config CMD_CROS_EC
> > bool "Enable crosec command"
> > depends on CROS_EC
> > @@ -82,3 +88,5 @@ config RESET
> > Each driver can provide a reset method which will be called to
> > effect a reset. The uclass will try all available drivers when
> > reset_walk() is called.
> > +
> > +endmenu
> > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> > index bd63621..b5d9048 100644
> > --- a/drivers/rtc/Kconfig
> > +++ b/drivers/rtc/Kconfig
> > @@ -1,3 +1,9 @@
> > +#
> > +# RTC drivers configuration
> > +#
> > +
> > +menu "Real Time Clock"
> > +
> > config DM_RTC
> > bool "Enable Driver Model for RTC drivers"
> > depends on DM
> > @@ -6,3 +12,5 @@ config DM_RTC
> > then provides the rtc_get()/rtc_set() interface, delegating to
> > drivers to perform the actual functions. See rtc.h for a
> > description of the API.
> > +
> > +endmenu
> > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index 4829284..b87eb01 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -1,3 +1,9 @@
> > +#
> > +# Serial device configuration
> > +#
> > +
> > +menu "Serial drivers"
> > +
> > config DM_SERIAL
> > bool "Enable Driver Model for serial drivers"
> > depends on DM
> > @@ -102,3 +108,5 @@ config UNIPHIER_SERIAL
> > help
> > If you have a UniPhier based board and want to use the on-chip
> > serial ports, say Y to this option. If unsure, say N.
> > +
> > +endmenu
> > diff --git a/drivers/sound/Kconfig b/drivers/sound/Kconfig
> > index 3b96e84..5de86c0 100644
> > --- a/drivers/sound/Kconfig
> > +++ b/drivers/sound/Kconfig
> > @@ -1,3 +1,5 @@
> > +menu "Sound support"
> > +
> > config SOUND
> > bool "Enable sound support"
> > help
> > @@ -53,3 +55,5 @@ config SOUND_WM8994
> > Enable the wm8994 audio codec. This is connected via I2S for
> > audio data and I2C for codec control. At present it only works
> > with the Samsung I2S driver.
> > +
> > +endmenu
> > diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> > index 3fa5b2e..19b1b3d 100644
> > --- a/drivers/usb/Kconfig
> > +++ b/drivers/usb/Kconfig
> > @@ -1,3 +1,9 @@
> > +#
> > +# USB device configuration
> > +#
> > +
> > +menu "USB support"
> > +
> > config USB_ARCH_HAS_HCD
> > def_bool y
> >
> > @@ -60,3 +66,5 @@ config USB_STORAGE
> > board's USB port.
> >
> > endif
> > +
> > +endmenu
> > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> > index 9ae23e8..892781d 100644
> > --- a/drivers/video/Kconfig
> > +++ b/drivers/video/Kconfig
> > @@ -1,3 +1,9 @@
> > +#
> > +# Video configuration
> > +#
> > +
> > +menu "Graphics support"
> > +
> > config VIDEO_VESA
> > bool "Enable VESA video driver support"
> > default n
> > @@ -240,3 +246,5 @@ config VIDEO_TEGRA124
> > HDMI. At present only eDP is supported by U-Boot. This option
> > enables this support which can be used on devices which
> > have an eDP display connected.
> > +
> > +endmenu
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150801/694ee1bc/attachment.sig>
More information about the U-Boot
mailing list