[U-Boot] [U-Boot, 3/4] arm: at91: pmc: replace the constant with a define in at91_pmc.h

[Andreas Bießmann]

Dear Erik van Luijk,

Erik van Luijk <evanluijk at interact.nl> writes:
>To enable the clocks on the at91 boards a constant (0x4) is used.
>This is replaced with a define in at91_pmc.h (1 <<  2).
>
>Signed-off-by: Erik van Luijk <evanluijk at interact.nl>
>Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>
>---
> arch/arm/mach-at91/include/mach/at91_pmc.h      | 1 +
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +-
> board/atmel/at91sam9n12ek/at91sam9n12ek.c       | 2 +-
> board/atmel/at91sam9x5ek/at91sam9x5ek.c         | 2 +-
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +-
> board/atmel/sama5d3xek/sama5d3xek.c             | 2 +-
> board/atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +-
> board/atmel/sama5d4ek/sama5d4ek.c               | 2 +-
> board/siemens/corvus/board.c                    | 2 +-
> 9 files changed, 9 insertions(+), 8 deletions(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann