[U-Boot] [PATCH v2 23/28] dm: tpm: Convert LPC driver to driver model
Christophe Ricard
christophe.ricard at gmail.com
Mon Aug 24 22:23:04 CEST 2015
Hi Simon,
Acked-by: Christophe Ricard<christophe-h.ricard at st.com>
Best Regards
Christophe
On 23/08/2015 02:31, Simon Glass wrote:
> Convert the tpm_tis_lpc driver to use driver model and update boards which
> use it.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v2:
> - Update driver for the new uclass interface
>
> configs/chromebook_link_defconfig | 2 +
> configs/chromebox_panther_defconfig | 2 +
> configs/coreboot-x86_defconfig | 2 +
> drivers/tpm/tpm_tis_lpc.c | 286 +++++++++++++++++-------------------
> 4 files changed, 137 insertions(+), 155 deletions(-)
>
> diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig
> index b0fc5ca..85752e4 100644
> --- a/configs/chromebook_link_defconfig
> +++ b/configs/chromebook_link_defconfig
> @@ -11,12 +11,14 @@ CONFIG_HAVE_VGA_BIOS=y
> CONFIG_BOOTSTAGE=y
> CONFIG_BOOTSTAGE_REPORT=y
> CONFIG_CMD_BOOTSTAGE=y
> +CONFIG_CMD_TPM=y
> CONFIG_OF_CONTROL=y
> CONFIG_DM_PCI=y
> CONFIG_SPI_FLASH=y
> CONFIG_CMD_CROS_EC=y
> CONFIG_CROS_EC=y
> CONFIG_CROS_EC_LPC=y
> +CONFIG_DM_TPM=y
> CONFIG_TPM_TIS_LPC=y
> CONFIG_VIDEO_VESA=y
> CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
> diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig
> index e7ef8fe..a6bafe3 100644
> --- a/configs/chromebox_panther_defconfig
> +++ b/configs/chromebox_panther_defconfig
> @@ -11,12 +11,14 @@ CONFIG_HAVE_VGA_BIOS=y
> CONFIG_BOOTSTAGE=y
> CONFIG_BOOTSTAGE_REPORT=y
> CONFIG_CMD_BOOTSTAGE=y
> +CONFIG_CMD_TPM=y
> CONFIG_OF_CONTROL=y
> CONFIG_DM_PCI=y
> CONFIG_SPI_FLASH=y
> CONFIG_CMD_CROS_EC=y
> CONFIG_CROS_EC=y
> CONFIG_CROS_EC_LPC=y
> +CONFIG_DM_TPM=y
> CONFIG_TPM_TIS_LPC=y
> CONFIG_VIDEO_VESA=y
> CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
> diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig
> index 66b8caa..fda2b7e 100644
> --- a/configs/coreboot-x86_defconfig
> +++ b/configs/coreboot-x86_defconfig
> @@ -9,11 +9,13 @@ CONFIG_TSC_CALIBRATION_BYPASS=y
> CONFIG_BOOTSTAGE=y
> CONFIG_BOOTSTAGE_REPORT=y
> CONFIG_CMD_BOOTSTAGE=y
> +CONFIG_CMD_TPM=y
> CONFIG_OF_CONTROL=y
> CONFIG_DM_PCI=y
> CONFIG_SPI_FLASH=y
> CONFIG_NETDEVICES=y
> CONFIG_E1000=y
> +CONFIG_DM_TPM=y
> CONFIG_TPM_TIS_LPC=y
> CONFIG_USE_PRIVATE_LIBGCC=y
> CONFIG_SYS_VSNPRINTF=y
> diff --git a/drivers/tpm/tpm_tis_lpc.c b/drivers/tpm/tpm_tis_lpc.c
> index 3109c50..b41c3ce 100644
> --- a/drivers/tpm/tpm_tis_lpc.c
> +++ b/drivers/tpm/tpm_tis_lpc.c
> @@ -14,9 +14,11 @@
> */
>
> #include <common.h>
> -#include <asm/io.h>
> +#include <dm.h>
> +#include <mapmem.h>
> #include <tis.h>
> #include <tpm.h>
> +#include <asm/io.h>
>
> #define PREFIX "lpc_tpm: "
>
> @@ -37,13 +39,15 @@ struct tpm_locality {
> u8 padding4[251];
> };
>
> +struct tpm_tis_lpc_priv {
> + struct tpm_locality *regs;
> +};
> +
> /*
> * This pointer refers to the TPM chip, 5 of its localities are mapped as an
> * array.
> */
> #define TPM_TOTAL_LOCALITIES 5
> -static struct tpm_locality *lpc_tpm_dev =
> - (struct tpm_locality *)CONFIG_TPM_TIS_BASE_ADDRESS;
>
> /* Some registers' bit field definitions */
> #define TIS_STS_VALID (1 << 7) /* 0x80 */
> @@ -64,85 +68,45 @@ static struct tpm_locality *lpc_tpm_dev =
> #define TIS_STS_BURST_COUNT_MASK (0xffff)
> #define TIS_STS_BURST_COUNT_SHIFT (8)
>
> -/*
> - * Error value returned if a tpm register does not enter the expected state
> - * after continuous polling. No actual TPM register reading ever returns -1,
> - * so this value is a safe error indication to be mixed with possible status
> - * register values.
> - */
> -#define TPM_TIMEOUT_ERR (-1)
> -
> -/* Error value returned on various TPM driver errors. */
> -#define TPM_DRIVER_ERR (1)
> -
> /* 1 second is plenty for anything TPM does. */
> #define MAX_DELAY_US (1000 * 1000)
>
> /* Retrieve burst count value out of the status register contents. */
> static u16 burst_count(u32 status)
> {
> - return (status >> TIS_STS_BURST_COUNT_SHIFT) & TIS_STS_BURST_COUNT_MASK;
> + return (status >> TIS_STS_BURST_COUNT_SHIFT) &
> + TIS_STS_BURST_COUNT_MASK;
> }
>
> -/*
> - * Structures defined below allow creating descriptions of TPM vendor/device
> - * ID information for run time discovery. The only device the system knows
> - * about at this time is Infineon slb9635.
> - */
> -struct device_name {
> - u16 dev_id;
> - const char * const dev_name;
> -};
> -
> -struct vendor_name {
> - u16 vendor_id;
> - const char *vendor_name;
> - const struct device_name *dev_names;
> -};
> -
> -static const struct device_name infineon_devices[] = {
> - {0xb, "SLB9635 TT 1.2"},
> - {0}
> -};
> -
> -static const struct vendor_name vendor_names[] = {
> - {0x15d1, "Infineon", infineon_devices},
> -};
> -
> -/*
> - * Cached vendor/device ID pair to indicate that the device has been already
> - * discovered.
> - */
> -static u32 vendor_dev_id;
> -
> /* TPM access wrappers to support tracing */
> -static u8 tpm_read_byte(const u8 *ptr)
> +static u8 tpm_read_byte(struct tpm_tis_lpc_priv *priv, const u8 *ptr)
> {
> u8 ret = readb(ptr);
> debug(PREFIX "Read reg 0x%4.4x returns 0x%2.2x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, ret);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, ret);
> return ret;
> }
>
> -static u32 tpm_read_word(const u32 *ptr)
> +static u32 tpm_read_word(struct tpm_tis_lpc_priv *priv, const u32 *ptr)
> {
> u32 ret = readl(ptr);
> debug(PREFIX "Read reg 0x%4.4x returns 0x%8.8x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, ret);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, ret);
> return ret;
> }
>
> -static void tpm_write_byte(u8 value, u8 *ptr)
> +static void tpm_write_byte(struct tpm_tis_lpc_priv *priv, u8 value, u8 *ptr)
> {
> debug(PREFIX "Write reg 0x%4.4x with 0x%2.2x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, value);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, value);
> writeb(value, ptr);
> }
>
> -static void tpm_write_word(u32 value, u32 *ptr)
> +static void tpm_write_word(struct tpm_tis_lpc_priv *priv, u32 value,
> + u32 *ptr)
> {
> debug(PREFIX "Write reg 0x%4.4x with 0x%8.8x\n",
> - (u32)(uintptr_t)ptr - (u32)(uintptr_t)lpc_tpm_dev, value);
> + (u32)(uintptr_t)ptr - (u32)(uintptr_t)priv->regs, value);
> writel(value, ptr);
> }
>
> @@ -157,67 +121,51 @@ static void tpm_write_word(u32 value, u32 *ptr)
> * @expected - value the field(s) are supposed to be set to
> *
> * Returns the register contents in case the expected value was found in the
> - * appropriate register bits, or TPM_TIMEOUT_ERR on timeout.
> + * appropriate register bits, or -ETIMEDOUT on timeout.
> */
> -static u32 tis_wait_reg(u32 *reg, u8 mask, u8 expected)
> +static int tis_wait_reg(struct tpm_tis_lpc_priv *priv, u32 *reg, u8 mask,
> + u8 expected)
> {
> u32 time_us = MAX_DELAY_US;
>
> while (time_us > 0) {
> - u32 value = tpm_read_word(reg);
> + u32 value = tpm_read_word(priv, reg);
> if ((value & mask) == expected)
> return value;
> udelay(1); /* 1 us */
> time_us--;
> }
> - return TPM_TIMEOUT_ERR;
> +
> + return -ETIMEDOUT;
> }
>
> /*
> * Probe the TPM device and try determining its manufacturer/device name.
> *
> - * Returns 0 on success (the device is found or was found during an earlier
> - * invocation) or TPM_DRIVER_ERR if the device is not found.
> + * Returns 0 on success, -ve on error
> */
> -int tis_init(void)
> +static int tpm_tis_lpc_probe(struct udevice *dev)
> {
> - u32 didvid = tpm_read_word(&lpc_tpm_dev[0].did_vid);
> - int i;
> - const char *device_name = "unknown";
> - const char *vendor_name = device_name;
> - u16 vid, did;
> -
> - if (vendor_dev_id)
> - return 0; /* Already probed. */
> -
> - if (!didvid || (didvid == 0xffffffff)) {
> - printf("%s: No TPM device found\n", __func__);
> - return TPM_DRIVER_ERR;
> - }
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + u32 vid, did;
> + fdt_addr_t addr;
> + u32 didvid;
>
> - vendor_dev_id = didvid;
> + addr = dev_get_addr(dev);
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> + priv->regs = map_sysmem(addr, 0);
> + didvid = tpm_read_word(priv, &priv->regs[0].did_vid);
>
> vid = didvid & 0xffff;
> did = (didvid >> 16) & 0xffff;
> - for (i = 0; i < ARRAY_SIZE(vendor_names); i++) {
> - int j = 0;
> - u16 known_did;
> -
> - if (vid == vendor_names[i].vendor_id)
> - vendor_name = vendor_names[i].vendor_name;
> -
> - while ((known_did = vendor_names[i].dev_names[j].dev_id) != 0) {
> - if (known_did == did) {
> - device_name =
> - vendor_names[i].dev_names[j].dev_name;
> - break;
> - }
> - j++;
> - }
> - break;
> + if (vid != 0x15d1 || did != 0xb) {
> + debug("Invalid vendor/device ID %04x/%04x\n", vid, did);
> + return -ENOSYS;
> }
>
> - printf("Found TPM %s by %s\n", device_name, vendor_name);
> + debug("Found TPM %s by %s\n", "SLB9635 TT 1.2", "Infineon");
> +
> return 0;
> }
>
> @@ -229,23 +177,25 @@ int tis_init(void)
> * @data - address of the data to send, byte by byte
> * @len - length of the data to send
> *
> - * Returns 0 on success, TPM_DRIVER_ERR on error (in case the device does
> - * not accept the entire command).
> + * Returns 0 on success, -ve on error (in case the device does not accept
> + * the entire command).
> */
> -static u32 tis_senddata(const u8 * const data, u32 len)
> +static int tis_senddata(struct udevice *dev, const u8 *data, size_t len)
> {
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + struct tpm_locality *regs = priv->regs;
> u32 offset = 0;
> u16 burst = 0;
> u32 max_cycles = 0;
> u8 locality = 0;
> u32 value;
>
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_COMMAND_READY, TIS_STS_COMMAND_READY);
> - if (value == TPM_TIMEOUT_ERR) {
> + if (value == -ETIMEDOUT) {
> printf("%s:%d - failed to get 'command_ready' status\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value;
> }
> burst = burst_count(value);
>
> @@ -257,11 +207,11 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> if (max_cycles++ == MAX_DELAY_US) {
> printf("%s:%d failed to feed %d bytes of %d\n",
> __FILE__, __LINE__, len - offset, len);
> - return TPM_DRIVER_ERR;
> + return -ETIMEDOUT;
> }
> udelay(1);
> - burst = burst_count(tpm_read_word(&lpc_tpm_dev
> - [locality].tpm_status));
> + burst = burst_count(tpm_read_word(priv,
> + ®s[locality].tpm_status));
> }
>
> max_cycles = 0;
> @@ -277,16 +227,16 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> */
> count = min((u32)burst, len - offset - 1);
> while (count--)
> - tpm_write_byte(data[offset++],
> - &lpc_tpm_dev[locality].data);
> + tpm_write_byte(priv, data[offset++],
> + ®s[locality].data);
>
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_VALID, TIS_STS_VALID);
>
> - if ((value == TPM_TIMEOUT_ERR) || !(value & TIS_STS_EXPECT)) {
> + if ((value == -ETIMEDOUT) || !(value & TIS_STS_EXPECT)) {
> printf("%s:%d TPM command feed overflow\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value == -ETIMEDOUT ? value : -EIO;
> }
>
> burst = burst_count(value);
> @@ -301,21 +251,21 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> }
>
> /* Send the last byte. */
> - tpm_write_byte(data[offset++], &lpc_tpm_dev[locality].data);
> + tpm_write_byte(priv, data[offset++], ®s[locality].data);
> /*
> * Verify that TPM does not expect any more data as part of this
> * command.
> */
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_VALID, TIS_STS_VALID);
> - if ((value == TPM_TIMEOUT_ERR) || (value & TIS_STS_EXPECT)) {
> + if ((value == -ETIMEDOUT) || (value & TIS_STS_EXPECT)) {
> printf("%s:%d unexpected TPM status 0x%x\n",
> __FILE__, __LINE__, value);
> - return TPM_DRIVER_ERR;
> + return value == -ETIMEDOUT ? value : -EIO;
> }
>
> /* OK, sitting pretty, let's start the command execution. */
> - tpm_write_word(TIS_STS_TPM_GO, &lpc_tpm_dev[locality].tpm_status);
> + tpm_write_word(priv, TIS_STS_TPM_GO, ®s[locality].tpm_status);
> return 0;
> }
>
> @@ -329,25 +279,27 @@ static u32 tis_senddata(const u8 * const data, u32 len)
> *
> * On success stores the number of received bytes to len and returns 0. On
> * errors (misformatted TPM data or synchronization problems) returns
> - * TPM_DRIVER_ERR.
> + * -ve value.
> */
> -static u32 tis_readresponse(u8 *buffer, u32 *len)
> +static int tis_readresponse(struct udevice *dev, u8 *buffer, size_t len)
> {
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + struct tpm_locality *regs = priv->regs;
> u16 burst;
> u32 value;
> u32 offset = 0;
> u8 locality = 0;
> const u32 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID;
> - u32 expected_count = *len;
> + u32 expected_count = len;
> int max_cycles = 0;
>
> /* Wait for the TPM to process the command. */
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> has_data, has_data);
> - if (value == TPM_TIMEOUT_ERR) {
> + if (value == -ETIMEDOUT) {
> printf("%s:%d failed processing command\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value;
> }
>
> do {
> @@ -355,18 +307,17 @@ static u32 tis_readresponse(u8 *buffer, u32 *len)
> if (max_cycles++ == MAX_DELAY_US) {
> printf("%s:%d TPM stuck on read\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return -EIO;
> }
> udelay(1);
> - value = tpm_read_word(&lpc_tpm_dev
> - [locality].tpm_status);
> + value = tpm_read_word(priv, ®s[locality].tpm_status);
> }
>
> max_cycles = 0;
>
> while (burst-- && (offset < expected_count)) {
> - buffer[offset++] = tpm_read_byte(&lpc_tpm_dev
> - [locality].data);
> + buffer[offset++] = tpm_read_byte(priv,
> + ®s[locality].data);
>
> if (offset == 6) {
> /*
> @@ -383,22 +334,22 @@ static u32 tis_readresponse(u8 *buffer, u32 *len)
> expected_count = be32_to_cpu(real_length);
>
> if ((expected_count < offset) ||
> - (expected_count > *len)) {
> + (expected_count > len)) {
> printf("%s:%d bad response size %d\n",
> __FILE__, __LINE__,
> expected_count);
> - return TPM_DRIVER_ERR;
> + return -ENOSPC;
> }
> }
> }
>
> /* Wait for the next portion. */
> - value = tis_wait_reg(&lpc_tpm_dev[locality].tpm_status,
> + value = tis_wait_reg(priv, ®s[locality].tpm_status,
> TIS_STS_VALID, TIS_STS_VALID);
> - if (value == TPM_TIMEOUT_ERR) {
> + if (value == -ETIMEDOUT) {
> printf("%s:%d failed to read response\n",
> __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> + return value;
> }
>
> if (offset == expected_count)
> @@ -413,65 +364,90 @@ static u32 tis_readresponse(u8 *buffer, u32 *len)
> if (value & TIS_STS_DATA_AVAILABLE) {
> printf("%s:%d wrong receive status %x\n",
> __FILE__, __LINE__, value);
> - return TPM_DRIVER_ERR;
> + return -EBADMSG;
> }
>
> /* Tell the TPM that we are done. */
> - tpm_write_word(TIS_STS_COMMAND_READY, &lpc_tpm_dev
> - [locality].tpm_status);
> - *len = offset;
> - return 0;
> + tpm_write_word(priv, TIS_STS_COMMAND_READY,
> + ®s[locality].tpm_status);
> +
> + return offset;
> }
>
> -int tis_open(void)
> +static int tpm_tis_lpc_open(struct udevice *dev)
> {
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + struct tpm_locality *regs = priv->regs;
> u8 locality = 0; /* we use locality zero for everything. */
> + int ret;
>
> /* now request access to locality. */
> - tpm_write_word(TIS_ACCESS_REQUEST_USE, &lpc_tpm_dev[locality].access);
> + tpm_write_word(priv, TIS_ACCESS_REQUEST_USE, ®s[locality].access);
>
> /* did we get a lock? */
> - if (tis_wait_reg(&lpc_tpm_dev[locality].access,
> + ret = tis_wait_reg(priv, ®s[locality].access,
> TIS_ACCESS_ACTIVE_LOCALITY,
> - TIS_ACCESS_ACTIVE_LOCALITY) == TPM_TIMEOUT_ERR) {
> + TIS_ACCESS_ACTIVE_LOCALITY);
> + if (ret == -ETIMEDOUT) {
> printf("%s:%d - failed to lock locality %d\n",
> __FILE__, __LINE__, locality);
> - return TPM_DRIVER_ERR;
> + return ret;
> }
>
> - tpm_write_word(TIS_STS_COMMAND_READY,
> - &lpc_tpm_dev[locality].tpm_status);
> + tpm_write_word(priv, TIS_STS_COMMAND_READY,
> + ®s[locality].tpm_status);
> return 0;
> }
>
> -int tis_close(void)
> +static int tpm_tis_lpc_close(struct udevice *dev)
> {
> + struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
> + struct tpm_locality *regs = priv->regs;
> u8 locality = 0;
>
> - if (tpm_read_word(&lpc_tpm_dev[locality].access) &
> + if (tpm_read_word(priv, ®s[locality].access) &
> TIS_ACCESS_ACTIVE_LOCALITY) {
> - tpm_write_word(TIS_ACCESS_ACTIVE_LOCALITY,
> - &lpc_tpm_dev[locality].access);
> + tpm_write_word(priv, TIS_ACCESS_ACTIVE_LOCALITY,
> + ®s[locality].access);
>
> - if (tis_wait_reg(&lpc_tpm_dev[locality].access,
> - TIS_ACCESS_ACTIVE_LOCALITY, 0) ==
> - TPM_TIMEOUT_ERR) {
> + if (tis_wait_reg(priv, ®s[locality].access,
> + TIS_ACCESS_ACTIVE_LOCALITY, 0) == -ETIMEDOUT) {
> printf("%s:%d - failed to release locality %d\n",
> __FILE__, __LINE__, locality);
> - return TPM_DRIVER_ERR;
> + return -ETIMEDOUT;
> }
> }
> return 0;
> }
>
> -int tis_sendrecv(const u8 *sendbuf, size_t send_size,
> - u8 *recvbuf, size_t *recv_len)
> +static int tpm_tis_get_desc(struct udevice *dev, char *buf, int size)
> {
> - if (tis_senddata(sendbuf, send_size)) {
> - printf("%s:%d failed sending data to TPM\n",
> - __FILE__, __LINE__);
> - return TPM_DRIVER_ERR;
> - }
> + if (size < 50)
> + return -ENOSPC;
>
> - return tis_readresponse(recvbuf, (u32 *)recv_len);
> + return snprintf(buf, size, "1.2 TPM (vendor %s, chip %s)",
> + "Infineon", "SLB9635 TT 1.2");
> }
> +
> +
> +static const struct tpm_ops tpm_tis_lpc_ops = {
> + .open = tpm_tis_lpc_open,
> + .close = tpm_tis_lpc_close,
> + .get_desc = tpm_tis_get_desc,
> + .send = tis_senddata,
> + .recv = tis_readresponse,
> +};
> +
> +static const struct udevice_id tpm_tis_lpc_ids[] = {
> + { .compatible = "infineon,slb9635lpc" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(tpm_tis_lpc) = {
> + .name = "tpm_tis_lpc",
> + .id = UCLASS_TPM,
> + .of_match = tpm_tis_lpc_ids,
> + .ops = &tpm_tis_lpc_ops,
> + .probe = tpm_tis_lpc_probe,
> + .priv_auto_alloc_size = sizeof(struct tpm_tis_lpc_priv),
> +};
More information about the U-Boot
mailing list