[U-Boot] [UBOOT PATCH v5 0/3] Add ACPI table support

[Bin Meng]

Hi Saket,

On Tue, Aug 18, 2015 at 9:25 AM, Bin Meng <bmeng.cn at gmail.com> wrote:
> Hi Saket,
>
> On Tue, Aug 18, 2015 at 3:29 AM, Saket Sinha <saket.sinha89 at gmail.com> wrote:
>>
>> ACPI(Advanced Configuration and Power Interface), is a Power Management and
>> configuration standard allowing the operating system to control the amount of
>> power each device is given (allowing it to put certain devices on standby or
>> power-off for example). It is also used to control and/or check thermal zones
>> (temperature sensors, fan speeds, etc), battery levels, PCI IRQ routing, CPUs,
>> NUMA domains and many other things.
>>
>> Changes in v5:
>> - Incoporated Simon's review comments.
>
> Please wait until a day or two before you post new version. I haven't
> got a chance to review v4, but you've already posted v5. Also when you
> reply our review comments, please keep the U-Boot mailing list cc'ed.
>

I finished reviewing v5, but still see lots of coding convention
issues :( I suggest you read your codes line by line and make sure you
do not catch those obvious issues before you send the v6.

Regards,
Bin