[U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming

[Marek Vasut]

On Wednesday, August 26, 2015 at 03:47:28 PM, Jagan Teki wrote:
> On 26 August 2015 at 13:00, Chin Liang See <clsee at altera.com> wrote:
> > On Wed, 2015-08-26 at 08:57 +0200, marex at denx.de wrote:
> >> On Wednesday, August 26, 2015 at 02:09:55 AM, Chin Liang See wrote:
> >> > Enable the quad output fast read and quad input fast program
> >> > support. Quad mode is supported by Cadence QSPI controller.
> >> > 
> >> > Signed-off-by: Chin Liang See <clsee at altera.com>
> >> > Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> >> > Cc: Stefan Roese <sr at denx.de>
> >> > Cc: Vikas Manocha <vikas.manocha at st.com>
> >> > Cc: Jagannadh Teki <jteki at openedev.com>
> >> > Cc: Pavel Machek <pavel at denx.de>
> >> > Cc: Marek Vasut <marex at denx.de>
> >> > ---
> >> > 
> >> >  drivers/spi/cadence_qspi.c     |   11 +++++++++++
> >> >  drivers/spi/cadence_qspi_apb.c |   16 ++++++++++++----
> >> >  2 files changed, 23 insertions(+), 4 deletions(-)
> >> > 
> >> > diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
> >> > index 34a0f46..c6b69c4 100644
> >> > --- a/drivers/spi/cadence_qspi.c
> >> > +++ b/drivers/spi/cadence_qspi.c
> >> > @@ -318,6 +318,16 @@ static int cadence_spi_ofdata_to_platdata(struct
> >> > udevice *bus) return 0;
> >> > 
> >> >  }
> >> > 
> >> > +static int cadence_spi_child_pre_probe(struct udevice *dev)
> >> > +{
> >> > +   struct spi_slave *slave = dev_get_parentdata(dev);
> >> > +
> >> > +   /* Cadence QSPI controller can support quad read and program */
> >> > +   slave->op_mode_rx = SPI_OPM_RX_QOF;
> >> > +   slave->op_mode_tx = SPI_OPM_TX_QPP;
> >> > +   return 0;
> >> > +}
> >> > +
> >> > 
> >> >  static const struct dm_spi_ops cadence_spi_ops = {
> >> >  
> >> >     .xfer           = cadence_spi_xfer,
> >> >     .set_speed      = cadence_spi_set_speed,
> >> > 
> >> > @@ -341,5 +351,6 @@ U_BOOT_DRIVER(cadence_spi) = {
> >> > 
> >> >     .ofdata_to_platdata = cadence_spi_ofdata_to_platdata,
> >> >     .platdata_auto_alloc_size = sizeof(struct cadence_spi_platdata),
> >> >     .priv_auto_alloc_size = sizeof(struct cadence_spi_priv),
> >> > 
> >> > +   .child_pre_probe = cadence_spi_child_pre_probe,
> >> > 
> >> >     .probe = cadence_spi_probe,
> >> >  
> >> >  };
> >> 
> >> Simon, can you please check if this DM bit is correct ?
> >> 
> >> > diff --git a/drivers/spi/cadence_qspi_apb.c
> >> > b/drivers/spi/cadence_qspi_apb.c index d053407..deffb6b 100644
> >> > --- a/drivers/spi/cadence_qspi_apb.c
> >> > +++ b/drivers/spi/cadence_qspi_apb.c
> >> > @@ -29,6 +29,9 @@
> >> > 
> >> >  #include <asm/io.h>
> >> >  #include <asm/errno.h>
> >> >  #include "cadence_qspi.h"
> >> > 
> >> > +#include <spi.h>
> >> > +#include <spi_flash.h>
> >> > +#include "../mtd/spi/sf_internal.h"
> >> 
> >> Why do you need this include ?
> > 
> > Actually I am comparing the opcode to determine whether its a quad
> > command. If yes, we need to setup the controller accordingly.
> 
> Sorry, this I wouldn't recommend as of now please assign quad directly
> instead setting up controller based on the flash stuff, Yes things
> need to change it on u-boot like spi-nor framework and currently we
> are working on it[1] will defiantly back with proper solution.
> 
> [1]
> http://git.denx.de/?p=u-boot/u-boot-spi.git;a=shortlog;h=refs/heads/spi-no
> r

Is this stuff in any way compatible with the spi-nor stuff in Linux ?