[U-Boot] [PATCH v4 29/33] rockchip: Add I2C driver

Simon Glass sjg at chromium.org
Mon Aug 24 17:12:47 CEST 2015 

Add an I2C driver for the Rockchip RK3288, using driver model. It should work
for other Rockchip SoCs also.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v4:
- Rename pinctrl.h to dm/pinctrl.h

Changes in v3: None
Changes in v2: None

 arch/arm/include/asm/arch-rockchip/i2c.h |  70 ++++++
 drivers/i2c/Kconfig                      |   9 +
 drivers/i2c/Makefile                     |   1 +
 drivers/i2c/rk_i2c.c                     | 391 +++++++++++++++++++++++++++++++
 4 files changed, 471 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-rockchip/i2c.h
 create mode 100644 drivers/i2c/rk_i2c.c

diff --git a/arch/arm/include/asm/arch-rockchip/i2c.h b/arch/arm/include/asm/arch-rockchip/i2c.h
new file mode 100644
index 0000000..d81f8ff
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/i2c.h
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung at samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+struct i2c_regs {
+	u32 con;
+	u32 clkdiv;
+	u32 mrxaddr;
+	u32 mrxraddr;
+	u32 mtxcnt;
+	u32 mrxcnt;
+	u32 ien;
+	u32 ipd;
+	u32 fcnt;
+	u32 reserved0[0x37];
+	u32 txdata[8];
+	u32 reserved1[0x38];
+	u32 rxdata[8];
+};
+
+/* Control register */
+#define I2C_CON_EN		(1 << 0)
+#define I2C_CON_MOD(mod)	((mod) << 1)
+#define I2C_MODE_TX		0x00
+#define I2C_MODE_TRX		0x01
+#define I2C_MODE_RX		0x02
+#define I2C_MODE_RRX		0x03
+#define I2C_CON_MASK		(3 << 1)
+
+#define I2C_CON_START		(1 << 3)
+#define I2C_CON_STOP		(1 << 4)
+#define I2C_CON_LASTACK		(1 << 5)
+#define I2C_CON_ACTACK		(1 << 6)
+
+/* Clock dividor register */
+#define I2C_CLKDIV_VAL(divl, divh) \
+	(((divl) & 0xffff) | (((divh) << 16) & 0xffff0000))
+
+/* the slave address accessed  for master rx mode */
+#define I2C_MRXADDR_SET(vld, addr)	(((vld) << 24) | (addr))
+
+/* the slave register address accessed  for master rx mode */
+#define I2C_MRXRADDR_SET(vld, raddr)	(((vld) << 24) | (raddr))
+
+/* interrupt enable register */
+#define I2C_BTFIEN		(1 << 0)
+#define I2C_BRFIEN		(1 << 1)
+#define I2C_MBTFIEN		(1 << 2)
+#define I2C_MBRFIEN		(1 << 3)
+#define I2C_STARTIEN		(1 << 4)
+#define I2C_STOPIEN		(1 << 5)
+#define I2C_NAKRCVIEN		(1 << 6)
+
+/* interrupt pending register */
+#define I2C_BTFIPD              (1 << 0)
+#define I2C_BRFIPD              (1 << 1)
+#define I2C_MBTFIPD             (1 << 2)
+#define I2C_MBRFIPD             (1 << 3)
+#define I2C_STARTIPD            (1 << 4)
+#define I2C_STOPIPD             (1 << 5)
+#define I2C_NAKRCVIPD           (1 << 6)
+#define I2C_IPD_ALL_CLEAN       0x7f
+
+#endif
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index c40bd5c..14adda2 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -58,6 +58,15 @@ config DM_I2C_GPIO
 	  bindings are supported.
 	  Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
 
+config SYS_I2C_ROCKCHIP
+	bool "Rockchip I2C driver"
+	depends on DM_I2C
+	help
+	  Add support for the Rockchip I2C driver. This is used with various
+	  Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
+	  have several I2C ports and all are provided, controled by the
+	  device tree.
+
 config SYS_I2C_SANDBOX
 	bool "Sandbox I2C driver"
 	depends on SANDBOX && DM_I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 9b45248..8ce294b 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
 obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
 obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
+obj-$(CONFIG_SYS_I2C_ROCKCHIP) += rk_i2c.o
 obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
 obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o
 obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
diff --git a/drivers/i2c/rk_i2c.c b/drivers/i2c/rk_i2c.c
new file mode 100644
index 0000000..ebdba35
--- /dev/null
+++ b/drivers/i2c/rk_i2c.c
@@ -0,0 +1,391 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * (C) Copyright 2008-2014 Rockchip Electronics
+ * Peter, Software Engineering, <superpeter.cai at gmail.com>.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/i2c.h>
+#include <asm/arch/periph.h>
+#include <dm/pinctrl.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* i2c timerout */
+#define I2C_TIMEOUT_MS		100
+#define I2C_RETRY_COUNT		3
+
+/* rk i2c fifo max transfer bytes */
+#define RK_I2C_FIFO_SIZE	32
+
+struct rk_i2c {
+	struct udevice *clk;
+	struct udevice *pinctrl;
+	struct i2c_regs *regs;
+	unsigned int speed;
+	enum periph_id id;
+};
+
+static inline void rk_i2c_get_div(int div, int *divh, int *divl)
+{
+	*divl = div / 2;
+	if (div % 2 == 0)
+		*divh = div / 2;
+	else
+		*divh = DIV_ROUND_UP(div, 2);
+}
+
+/*
+ * SCL Divisor = 8 * (CLKDIVL+1 + CLKDIVH+1)
+ * SCL = PCLK / SCLK Divisor
+ * i2c_rate = PCLK
+ */
+static void rk_i2c_set_clk(struct rk_i2c *i2c, uint32_t scl_rate)
+{
+	uint32_t i2c_rate;
+	int div, divl, divh;
+
+	/* First get i2c rate from pclk */
+	i2c_rate = clk_get_periph_rate(i2c->clk, i2c->id);
+
+	div = DIV_ROUND_UP(i2c_rate, scl_rate * 8) - 2;
+	divh = 0;
+	divl = 0;
+	if (div >= 0)
+		rk_i2c_get_div(div, &divh, &divl);
+	writel(I2C_CLKDIV_VAL(divl, divh), &i2c->regs->clkdiv);
+
+	debug("rk_i2c_set_clk: i2c rate = %d, scl rate = %d\n", i2c_rate,
+	      scl_rate);
+	debug("set i2c clk div = %d, divh = %d, divl = %d\n", div, divh, divl);
+	debug("set clk(I2C_CLKDIV: 0x%08x)\n", readl(&i2c->regs->clkdiv));
+}
+
+static void rk_i2c_show_regs(struct i2c_regs *regs)
+{
+#ifdef DEBUG
+	uint i;
+
+	debug("i2c_con: 0x%08x\n", readl(&regs->con));
+	debug("i2c_clkdiv: 0x%08x\n", readl(&regs->clkdiv));
+	debug("i2c_mrxaddr: 0x%08x\n", readl(&regs->mrxaddr));
+	debug("i2c_mrxraddR: 0x%08x\n", readl(&regs->mrxraddr));
+	debug("i2c_mtxcnt: 0x%08x\n", readl(&regs->mtxcnt));
+	debug("i2c_mrxcnt: 0x%08x\n", readl(&regs->mrxcnt));
+	debug("i2c_ien: 0x%08x\n", readl(&regs->ien));
+	debug("i2c_ipd: 0x%08x\n", readl(&regs->ipd));
+	debug("i2c_fcnt: 0x%08x\n", readl(&regs->fcnt));
+	for (i = 0; i < 8; i++)
+		debug("i2c_txdata%d: 0x%08x\n", i, readl(&regs->txdata[i]));
+	for (i = 0; i < 8; i++)
+		debug("i2c_rxdata%d: 0x%08x\n", i, readl(&regs->rxdata[i]));
+#endif
+}
+
+static int rk_i2c_send_start_bit(struct rk_i2c *i2c)
+{
+	struct i2c_regs *regs = i2c->regs;
+	ulong start;
+
+	debug("I2c Send Start bit.\n");
+	writel(I2C_IPD_ALL_CLEAN, &regs->ipd);
+
+	writel(I2C_CON_EN | I2C_CON_START, &regs->con);
+	writel(I2C_STARTIEN, &regs->ien);
+
+	start = get_timer(0);
+	while (1) {
+		if (readl(&regs->ipd) & I2C_STARTIPD) {
+			writel(I2C_STARTIPD, &regs->ipd);
+			break;
+		}
+		if (get_timer(start) > I2C_TIMEOUT_MS) {
+			debug("I2C Send Start Bit Timeout\n");
+			rk_i2c_show_regs(regs);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	return 0;
+}
+
+static int rk_i2c_send_stop_bit(struct rk_i2c *i2c)
+{
+	struct i2c_regs *regs = i2c->regs;
+	ulong start;
+
+	debug("I2c Send Stop bit.\n");
+	writel(I2C_IPD_ALL_CLEAN, &regs->ipd);
+
+	writel(I2C_CON_EN | I2C_CON_STOP, &regs->con);
+	writel(I2C_CON_STOP, &regs->ien);
+
+	start = get_timer(0);
+	while (1) {
+		if (readl(&regs->ipd) & I2C_STOPIPD) {
+			writel(I2C_STOPIPD, &regs->ipd);
+			break;
+		}
+		if (get_timer(start) > I2C_TIMEOUT_MS) {
+			debug("I2C Send Start Bit Timeout\n");
+			rk_i2c_show_regs(regs);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	return 0;
+}
+
+static inline void rk_i2c_disable(struct rk_i2c *i2c)
+{
+	writel(0, &i2c->regs->con);
+}
+
+static int rk_i2c_read(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
+		       uchar *buf, uint b_len)
+{
+	struct i2c_regs *regs = i2c->regs;
+	uchar *pbuf = buf;
+	uint bytes_remain_len = b_len;
+	uint bytes_xferred = 0;
+	uint words_xferred = 0;
+	ulong start;
+	uint con = 0;
+	uint rxdata;
+	uint i, j;
+	int err;
+
+	debug("rk_i2c_read: chip = %d, reg = %d, r_len = %d, b_len = %d\n",
+	      chip, reg, r_len, b_len);
+
+	err = rk_i2c_send_start_bit(i2c);
+	if (err)
+		return err;
+
+	writel(I2C_MRXADDR_SET(1, chip << 1 | 1), &regs->mrxaddr);
+	if (r_len == 0) {
+		writel(0, &regs->mrxraddr);
+	} else if (r_len < 4) {
+		writel(I2C_MRXRADDR_SET(r_len, reg), &regs->mrxraddr);
+	} else {
+		debug("I2C Read: addr len %d not supported\n", r_len);
+		return -EIO;
+	}
+
+	while (bytes_remain_len) {
+		if (bytes_remain_len > RK_I2C_FIFO_SIZE) {
+			con = I2C_CON_EN | I2C_CON_MOD(I2C_MODE_TRX);
+			bytes_xferred = 32;
+		} else {
+			con = I2C_CON_EN | I2C_CON_MOD(I2C_MODE_TRX) |
+				I2C_CON_LASTACK;
+			bytes_xferred = bytes_remain_len;
+		}
+		words_xferred = DIV_ROUND_UP(bytes_xferred, 4);
+
+		writel(con, &regs->con);
+		writel(bytes_xferred, &regs->mrxcnt);
+		writel(I2C_MBRFIEN | I2C_NAKRCVIEN, &regs->ien);
+
+		start = get_timer(0);
+		while (1) {
+			if (readl(&regs->ipd) & I2C_NAKRCVIPD) {
+				writel(I2C_NAKRCVIPD, &regs->ipd);
+				err = -EREMOTEIO;
+			}
+			if (readl(&regs->ipd) & I2C_MBRFIPD) {
+				writel(I2C_MBRFIPD, &regs->ipd);
+				break;
+			}
+			if (get_timer(start) > I2C_TIMEOUT_MS) {
+				debug("I2C Read Data Timeout\n");
+				err =  -ETIMEDOUT;
+				rk_i2c_show_regs(regs);
+				goto i2c_exit;
+			}
+			udelay(1);
+		}
+
+		for (i = 0; i < words_xferred; i++) {
+			rxdata = readl(&regs->rxdata[i]);
+			debug("I2c Read RXDATA[%d] = 0x%x\n", i, rxdata);
+			for (j = 0; j < 4; j++) {
+				if ((i * 4 + j) == bytes_xferred)
+					break;
+				*pbuf++ = (rxdata >> (j * 8)) & 0xff;
+			}
+		}
+
+		bytes_remain_len -= bytes_xferred;
+		debug("I2C Read bytes_remain_len %d\n", bytes_remain_len);
+	}
+
+i2c_exit:
+	rk_i2c_send_stop_bit(i2c);
+	rk_i2c_disable(i2c);
+
+	return err;
+}
+
+static int rk_i2c_write(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
+			uchar *buf, uint b_len)
+{
+	struct i2c_regs *regs = i2c->regs;
+	int err;
+	uchar *pbuf = buf;
+	uint bytes_remain_len = b_len + r_len + 1;
+	uint bytes_xferred = 0;
+	uint words_xferred = 0;
+	ulong start;
+	uint txdata;
+	uint i, j;
+
+	debug("rk_i2c_write: chip = %d, reg = %d, r_len = %d, b_len = %d\n",
+	      chip, reg, r_len, b_len);
+	err = rk_i2c_send_start_bit(i2c);
+	if (err)
+		return err;
+
+	while (bytes_remain_len) {
+		if (bytes_remain_len > RK_I2C_FIFO_SIZE)
+			bytes_xferred = 32;
+		else
+			bytes_xferred = bytes_remain_len;
+		words_xferred = DIV_ROUND_UP(bytes_xferred, 4);
+
+		for (i = 0; i < words_xferred; i++) {
+			txdata = 0;
+			for (j = 0; j < 4; j++) {
+				if ((i * 4 + j) == bytes_xferred)
+					break;
+
+				if (i == 0 && j == 0) {
+					txdata |= (chip << 1);
+				} else if (i == 0 && j <= r_len) {
+					txdata |= (reg &
+						(0xff << ((j - 1) * 8))) << 8;
+				} else {
+					txdata |= (*pbuf++)<<(j * 8);
+				}
+				writel(txdata, &regs->txdata[i]);
+			}
+			debug("I2c Write TXDATA[%d] = 0x%x\n", i, txdata);
+		}
+
+		writel(I2C_CON_EN | I2C_CON_MOD(I2C_MODE_TX), &regs->con);
+		writel(bytes_xferred, &regs->mtxcnt);
+		writel(I2C_MBTFIEN | I2C_NAKRCVIEN, &regs->ien);
+
+		start = get_timer(0);
+		while (1) {
+			if (readl(&regs->ipd) & I2C_NAKRCVIPD) {
+				writel(I2C_NAKRCVIPD, &regs->ipd);
+				err = -EREMOTEIO;
+			}
+			if (readl(&regs->ipd) & I2C_MBTFIPD) {
+				writel(I2C_MBTFIPD, &regs->ipd);
+				break;
+			}
+			if (get_timer(start) > I2C_TIMEOUT_MS) {
+				debug("I2C Write Data Timeout\n");
+				err =  -ETIMEDOUT;
+				rk_i2c_show_regs(regs);
+				goto i2c_exit;
+			}
+			udelay(1);
+		}
+
+		bytes_remain_len -= bytes_xferred;
+		debug("I2C Write bytes_remain_len %d\n", bytes_remain_len);
+	}
+
+i2c_exit:
+	rk_i2c_send_stop_bit(i2c);
+	rk_i2c_disable(i2c);
+
+	return err;
+}
+
+static int rockchip_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+			     int nmsgs)
+{
+	struct rk_i2c *i2c = dev_get_priv(bus);
+	int ret;
+
+	debug("i2c_xfer: %d messages\n", nmsgs);
+	for (; nmsgs > 0; nmsgs--, msg++) {
+		debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+		if (msg->flags & I2C_M_RD) {
+			ret = rk_i2c_read(i2c, msg->addr, 0, 0, msg->buf,
+					  msg->len);
+		} else {
+			ret = rk_i2c_write(i2c, msg->addr, 0, 0, msg->buf,
+					   msg->len);
+		}
+		if (ret) {
+			debug("i2c_write: error sending\n");
+			return -EREMOTEIO;
+		}
+	}
+
+	return 0;
+}
+
+int rockchip_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+	struct rk_i2c *i2c = dev_get_priv(bus);
+
+	rk_i2c_set_clk(i2c, speed);
+
+	return 0;
+}
+
+static int rockchip_i2c_probe(struct udevice *bus)
+{
+	struct rk_i2c *i2c = dev_get_priv(bus);
+	int ret;
+
+	ret = uclass_get_device(UCLASS_PINCTRL, 0, &i2c->pinctrl);
+	if (ret)
+		return ret;
+	ret = uclass_get_device(UCLASS_CLK, 0, &i2c->clk);
+	if (ret)
+		return ret;
+	ret = pinctrl_get_periph_id(i2c->pinctrl, bus);
+	if (ret < 0)
+		return ret;
+	i2c->id = ret;
+	i2c->regs = (void *)dev_get_addr(bus);
+	return pinctrl_request(i2c->pinctrl, i2c->id, 0);
+}
+
+static const struct dm_i2c_ops rockchip_i2c_ops = {
+	.xfer		= rockchip_i2c_xfer,
+	.set_bus_speed	= rockchip_i2c_set_bus_speed,
+};
+
+static const struct udevice_id rockchip_i2c_ids[] = {
+	{ .compatible = "rockchip,rk3288-i2c" },
+	{ }
+};
+
+U_BOOT_DRIVER(i2c_rockchip) = {
+	.name	= "i2c_rockchip",
+	.id	= UCLASS_I2C,
+	.of_match = rockchip_i2c_ids,
+	.probe	= rockchip_i2c_probe,
+	.priv_auto_alloc_size = sizeof(struct rk_i2c),
+	.ops	= &rockchip_i2c_ops,
+};
-- 
2.5.0.457.gab17608

More information about the U-Boot mailing list