[U-Boot] [PATCH 14/15] ddr: altera: sequencer: Clean data types
Marek Vasut
marex at denx.de
Mon Aug 3 01:22:01 CEST 2015
Replace uintNN_t with uNN. No functional change.
Signed-off-by: Marek Vasut <marex at denx.de>
---
drivers/ddr/altera/sequencer.c | 96 +++++++++++++++++++++---------------------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index e6cc12e..f2d164a 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -60,7 +60,7 @@ const struct socfpga_sdram_misc_config *misccfg;
STATIC_SKIP_DELAY_LOOPS)
/* calibration steps requested by the rtl */
-uint16_t dyn_calib_steps;
+u16 dyn_calib_steps;
/*
* To make CALIB_SKIP_DELAY_LOOPS a dynamic conditional option
@@ -71,7 +71,7 @@ uint16_t dyn_calib_steps;
* zero when skipping
*/
-uint16_t skip_delay_mask; /* mask off bits when skipping/not-skipping */
+u16 skip_delay_mask; /* mask off bits when skipping/not-skipping */
#define SKIP_DELAY_LOOP_VALUE_OR_ZERO(non_skip_value) \
((non_skip_value) & skip_delay_mask)
@@ -79,8 +79,8 @@ uint16_t skip_delay_mask; /* mask off bits when skipping/not-skipping */
struct gbl_type *gbl;
struct param_type *param;
-static void set_failing_group_stage(uint32_t group, uint32_t stage,
- uint32_t substage)
+static void set_failing_group_stage(u32 group, u32 stage,
+ u32 substage)
{
/*
* Only set the global stage if there was not been any other
@@ -286,49 +286,49 @@ static void scc_mgr_initialize(void)
}
}
-static void scc_mgr_set_dqdqs_output_phase(uint32_t write_group, uint32_t phase)
+static void scc_mgr_set_dqdqs_output_phase(u32 write_group, u32 phase)
{
scc_mgr_set(SCC_MGR_DQDQS_OUT_PHASE_OFFSET, write_group, phase);
}
-static void scc_mgr_set_dqs_bus_in_delay(uint32_t read_group, uint32_t delay)
+static void scc_mgr_set_dqs_bus_in_delay(u32 read_group, u32 delay)
{
scc_mgr_set(SCC_MGR_DQS_IN_DELAY_OFFSET, read_group, delay);
}
-static void scc_mgr_set_dqs_en_phase(uint32_t read_group, uint32_t phase)
+static void scc_mgr_set_dqs_en_phase(u32 read_group, u32 phase)
{
scc_mgr_set(SCC_MGR_DQS_EN_PHASE_OFFSET, read_group, phase);
}
-static void scc_mgr_set_dqs_en_delay(uint32_t read_group, uint32_t delay)
+static void scc_mgr_set_dqs_en_delay(u32 read_group, u32 delay)
{
scc_mgr_set(SCC_MGR_DQS_EN_DELAY_OFFSET, read_group, delay);
}
-static void scc_mgr_set_dqs_io_in_delay(uint32_t delay)
+static void scc_mgr_set_dqs_io_in_delay(u32 delay)
{
scc_mgr_set(SCC_MGR_IO_IN_DELAY_OFFSET, rwcfg->mem_dq_per_write_dqs,
delay);
}
-static void scc_mgr_set_dq_in_delay(uint32_t dq_in_group, uint32_t delay)
+static void scc_mgr_set_dq_in_delay(u32 dq_in_group, u32 delay)
{
scc_mgr_set(SCC_MGR_IO_IN_DELAY_OFFSET, dq_in_group, delay);
}
-static void scc_mgr_set_dq_out1_delay(uint32_t dq_in_group, uint32_t delay)
+static void scc_mgr_set_dq_out1_delay(u32 dq_in_group, u32 delay)
{
scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET, dq_in_group, delay);
}
-static void scc_mgr_set_dqs_out1_delay(uint32_t delay)
+static void scc_mgr_set_dqs_out1_delay(u32 delay)
{
scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET, rwcfg->mem_dq_per_write_dqs,
delay);
}
-static void scc_mgr_set_dm_out1_delay(uint32_t dm, uint32_t delay)
+static void scc_mgr_set_dm_out1_delay(u32 dm, u32 delay)
{
scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET,
rwcfg->mem_dq_per_write_dqs + 1 + dm,
@@ -336,7 +336,7 @@ static void scc_mgr_set_dm_out1_delay(uint32_t dm, uint32_t delay)
}
/* load up dqs config settings */
-static void scc_mgr_load_dqs(uint32_t dqs)
+static void scc_mgr_load_dqs(u32 dqs)
{
writel(dqs, &sdr_scc_mgr->dqs_ena);
}
@@ -348,13 +348,13 @@ static void scc_mgr_load_dqs_io(void)
}
/* load up dq config settings */
-static void scc_mgr_load_dq(uint32_t dq_in_group)
+static void scc_mgr_load_dq(u32 dq_in_group)
{
writel(dq_in_group, &sdr_scc_mgr->dq_ena);
}
/* load up dm config settings */
-static void scc_mgr_load_dm(uint32_t dm)
+static void scc_mgr_load_dm(u32 dm)
{
writel(dm, &sdr_scc_mgr->dm_ena);
}
@@ -399,8 +399,8 @@ static void scc_mgr_set_dqs_en_phase_all_ranks(u32 read_group, u32 phase)
read_group, phase, 0);
}
-static void scc_mgr_set_dqdqs_output_phase_all_ranks(uint32_t write_group,
- uint32_t phase)
+static void scc_mgr_set_dqdqs_output_phase_all_ranks(u32 write_group,
+ u32 phase)
{
/*
* USER although the h/w doesn't support different phases per
@@ -414,8 +414,8 @@ static void scc_mgr_set_dqdqs_output_phase_all_ranks(uint32_t write_group,
write_group, phase, 0);
}
-static void scc_mgr_set_dqs_en_delay_all_ranks(uint32_t read_group,
- uint32_t delay)
+static void scc_mgr_set_dqs_en_delay_all_ranks(u32 read_group,
+ u32 delay)
{
/*
* In shadow register mode, the T11 settings are stored in
@@ -615,9 +615,9 @@ static void scc_mgr_zero_group(const u32 write_group, const int out_only)
* apply and load a particular input delay for the DQ pins in a group
* group_bgn is the index of the first dq pin (in the write group)
*/
-static void scc_mgr_apply_group_dq_in_delay(uint32_t group_bgn, uint32_t delay)
+static void scc_mgr_apply_group_dq_in_delay(u32 group_bgn, u32 delay)
{
- uint32_t i, p;
+ u32 i, p;
for (i = 0, p = group_bgn; i < rwcfg->mem_dq_per_read_dqs; i++, p++) {
scc_mgr_set_dq_in_delay(p, delay);
@@ -642,9 +642,9 @@ static void scc_mgr_apply_group_dq_out1_delay(const u32 delay)
}
/* apply and load a particular output delay for the DM pins in a group */
-static void scc_mgr_apply_group_dm_out1_delay(uint32_t delay1)
+static void scc_mgr_apply_group_dm_out1_delay(u32 delay1)
{
- uint32_t i;
+ u32 i;
for (i = 0; i < RW_MGR_NUM_DM_PER_WRITE_GROUP; i++) {
scc_mgr_set_dm_out1_delay(i, delay1);
@@ -654,8 +654,8 @@ static void scc_mgr_apply_group_dm_out1_delay(uint32_t delay1)
/* apply and load delay on both DQS and OCT out1 */
-static void scc_mgr_apply_group_dqs_io_and_oct_out1(uint32_t write_group,
- uint32_t delay)
+static void scc_mgr_apply_group_dqs_io_and_oct_out1(u32 write_group,
+ u32 delay)
{
scc_mgr_set_dqs_out1_delay(delay);
scc_mgr_load_dqs_io();
@@ -840,7 +840,7 @@ static void delay_for_n_mem_clocks(const u32 clocks)
*/
static void rw_mgr_mem_init_load_regs(u32 cntr0, u32 cntr1, u32 cntr2, u32 jump)
{
- uint32_t grpaddr = SDR_PHYGRP_RWMGRGRP_ADDRESS |
+ u32 grpaddr = SDR_PHYGRP_RWMGRGRP_ADDRESS |
RW_MGR_RUN_SINGLE_GROUP_OFFSET;
/* Load counters */
@@ -2147,7 +2147,7 @@ static int search_right_edge(const int write, const int rank_bgn,
} else { /* READ-ONLY */
scc_mgr_set_dqs_bus_in_delay(read_group, d + start_dqs);
if (iocfg->shift_dqs_en_when_shift_dqs) {
- uint32_t delay = d + start_dqs_en;
+ u32 delay = d + start_dqs_en;
if (delay > iocfg->dqs_en_delay_max)
delay = iocfg->dqs_en_delay_max;
scc_mgr_set_dqs_en_delay(read_group, delay);
@@ -2381,7 +2381,7 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn,
* Store these as signed since there are comparisons with
* signed numbers.
*/
- uint32_t sticky_bit_chk;
+ u32 sticky_bit_chk;
int32_t left_edge[rwcfg->mem_dq_per_read_dqs];
int32_t right_edge[rwcfg->mem_dq_per_read_dqs];
int32_t orig_mid_min, mid_min;
@@ -2665,9 +2665,9 @@ rw_mgr_mem_calibrate_dq_dqs_centering(const u32 rw_group, const u32 test_bgn,
*/
static int rw_mgr_mem_calibrate_vfifo(const u32 rw_group, const u32 test_bgn)
{
- uint32_t p, d;
- uint32_t dtaps_per_ptap;
- uint32_t failed_substage;
+ u32 p, d;
+ u32 dtaps_per_ptap;
+ u32 failed_substage;
int ret;
@@ -2783,7 +2783,7 @@ static int rw_mgr_mem_calibrate_vfifo_end(const u32 rw_group,
* detail in Altera EMI_RM 2015.05.04 , "UniPHY Calibration Stages".
* Calibrate LFIFO to find smallest read latency.
*/
-static uint32_t rw_mgr_mem_calibrate_lfifo(void)
+static u32 rw_mgr_mem_calibrate_lfifo(void)
{
int found_one = 0;
@@ -3193,8 +3193,8 @@ static void mem_init_latency(void)
*/
static void mem_skip_calibrate(void)
{
- uint32_t vfifo_offset;
- uint32_t i, j, r;
+ u32 vfifo_offset;
+ u32 i, j, r;
debug("%s:%d\n", __func__, __LINE__);
/* Need to update every shadow register set used by the interface */
@@ -3279,15 +3279,15 @@ static void mem_skip_calibrate(void)
*
* Perform memory calibration.
*/
-static uint32_t mem_calibrate(void)
+static u32 mem_calibrate(void)
{
- uint32_t i;
- uint32_t rank_bgn, sr;
- uint32_t write_group, write_test_bgn;
- uint32_t read_group, read_test_bgn;
- uint32_t run_groups, current_run;
- uint32_t failing_groups = 0;
- uint32_t group_failed = 0;
+ u32 i;
+ u32 rank_bgn, sr;
+ u32 write_group, write_test_bgn;
+ u32 read_group, read_test_bgn;
+ u32 run_groups, current_run;
+ u32 failing_groups = 0;
+ u32 group_failed = 0;
const u32 rwdqs_ratio = rwcfg->mem_if_read_dqs_width /
rwcfg->mem_if_write_dqs_width;
@@ -3506,7 +3506,7 @@ static int run_mem_calibrate(void)
*/
static void debug_mem_calibrate(int pass)
{
- uint32_t debug_info;
+ u32 debug_info;
if (pass) {
printf("%s: CALIBRATION PASSED\n", __FILE__);
@@ -3594,13 +3594,13 @@ static void initialize_reg_file(void)
*/
static void initialize_hps_phy(void)
{
- uint32_t reg;
+ u32 reg;
/*
* Tracking also gets configured here because it's in the
* same register.
*/
- uint32_t trk_sample_count = 7500;
- uint32_t trk_long_idle_sample_count = (10 << 16) | 100;
+ u32 trk_sample_count = 7500;
+ u32 trk_long_idle_sample_count = (10 << 16) | 100;
/*
* Format is number of outer loops in the 16 MSB, sample
* count in 16 LSB.
@@ -3684,7 +3684,7 @@ int sdram_calibration_full(void)
{
struct param_type my_param;
struct gbl_type my_gbl;
- uint32_t pass;
+ u32 pass;
memset(&my_param, 0, sizeof(my_param));
memset(&my_gbl, 0, sizeof(my_gbl));
--
2.1.4
More information about the U-Boot
mailing list