[U-Boot] [PATCH v2 7/8] rockchip: Drop first 32kb of zeros from the rkSD image type
Sjoerd Simons
sjoerd.simons at collabora.co.uk
Sun Aug 30 19:31:13 CEST 2015
Instead of creating a rockchip SPL SD card image with 32KB of zeros
which can be written to the start of an SD card, create the images with
only the useful data that should be written to an offset of 32KB on the
SD card.
The first 32 kilobytes aren't needed for bootup and only serve as
convenient way of accidentally obliterating your partition table.
Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
doc/README.rockchip | 2 +-
tools/rksd.c | 9 ++-------
2 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index ce8ce77..347fc05 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -90,7 +90,7 @@ Booting from an SD card
To write an image that boots from an SD card (assumed to be /dev/sdc):
./firefly-rk3288/tools/mkimage -T rksd -d firefly-rk3288/spl/u-boot-spl-dtb.bin out
- sudo dd if=out of=/dev/sdc
+ sudo dd if=out of=/dev/sdc seek=64
sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=256
This puts the Rockchip header and SPL image first and then places the U-Boot
diff --git a/tools/rksd.c b/tools/rksd.c
index 2efcd68..a8dbe98 100644
--- a/tools/rksd.c
+++ b/tools/rksd.c
@@ -14,9 +14,7 @@
#include "rkcommon.h"
enum {
- RKSD_HEADER0_START = 64 * RK_BLK_SIZE,
- RKSD_SPL_HDR_START = RKSD_HEADER0_START +
- RK_CODE1_OFFSET * RK_BLK_SIZE,
+ RKSD_SPL_HDR_START = RK_CODE1_OFFSET * RK_BLK_SIZE,
RKSD_SPL_START = RKSD_SPL_HDR_START + 4,
RKSD_HEADER_LEN = RKSD_SPL_START,
};
@@ -44,11 +42,8 @@ static void rksd_set_header(void *buf, struct stat *sbuf, int ifd,
unsigned int size;
int ret;
- /* Zero the whole header. The first 32KB is empty */
- memset(buf, '\0', RKSD_HEADER0_START);
-
size = params->file_size - RKSD_SPL_HDR_START;
- ret = rkcommon_set_header(buf + RKSD_HEADER0_START, size);
+ ret = rkcommon_set_header(buf, size);
if (ret) {
/* TODO(sjg at chromium.org): This method should return an error */
printf("Warning: SPL image is too large (size %#x) and will not boot\n",
--
2.5.1
More information about the U-Boot
mailing list