[U-Boot] [PATCH 0/2] net: lpc32xx: add support to RMII phy
Vladimir Zapolskiy
vz at mleia.com
Thu Aug 6 00:16:07 CEST 2015
Hi Joe,
On 06.07.2015 10:55, Vladimir Zapolskiy wrote:
> Hello Albert,
>
> On 06.07.2015 09:46, Albert ARIBAUD (3ADEV) wrote:
>> Hello Vladimir,
>>
>> On Mon, 6 Jul 2015 07:22:09 +0300, Vladimir Zapolskiy <vz at mleia.com>
>> wrote:
>>> This is an update to LPC32xx MAC driver, which needs to have small
>>> quirks in order to properly work with an external phy connected by
>>> RMII interface.
>>>
>>> RMII mode of MAC operation is selected, if CONFIG_RMII is defined,
>>> this option is aligned with a number of boards, which already have
>>> the same config value.
>>>
>>> Also hopefully the first change from the series speeds up auto
>>> negotiation due to corrected configuration of MAC on intialization.
>>>
>>> Tested with SMSC LAN8700 phy.
>>>
>>> Vladimir Zapolskiy (2):
>>> net: lpc32xx: improve MAC configuration on reset and initialization
>>> net: lpc32xx: add RMII phy mode support
>>
>> This series actually requires two other lpc32xx patches that you posted
>> earlier but which are not yet in u-boot/master or u-boot-arm/master:
>>
>> http://patchwork.ozlabs.org/patch/489100/
>> http://patchwork.ozlabs.org/patch/489190/
>>
>> In the future, please indicate when such a dependency is required, so
>> that testers know how to apply your patchs beforehand.
>
> my fault, certainly will add such a note in future...
>
>> This point aside, I've tested the four patches above u-boot-arm/master
>> on a work_92105 target which has CONFIG_MII, and found no regression...
>> and a dramatic increase in TFTP throughput, so thanks. :)
>
> Thank you so much for testing MII, this is something I'm unable to do on
> my end.
>
>> (not adding my Tested-by because I don't want to mislead anyone: I
>> haven't tested RMII)
>>
>> Amicalement,
>>
ping.
It's a pity that merge window is closed, please review/merge the changes.
Thank you in advance.
--
With best wishes,
Vladimir
More information about the U-Boot
mailing list