[U-Boot] [PATCH v2 2/5] ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2

[Kishon Vijay Abraham I]

Enabled clocks for the second dwc3 controller and second USB PHY present in
DRA7.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/cpu/armv7/omap5/hw_data.c      |   16 ++++++++++++++++
 arch/arm/cpu/armv7/omap5/prcm-regs.c    |    2 ++
 arch/arm/include/asm/arch-omap5/clock.h |    3 +++
 arch/arm/include/asm/omap_common.h      |    2 ++
 4 files changed, 23 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 3a723ca..11440ac 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -463,6 +463,9 @@ void enable_basic_clocks(void)
 #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
 		(*prcm)->cm_l3init_ocp2scp1_clkctrl,
 		(*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+		(*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
+#endif
 #endif
 		0
 	};
@@ -503,6 +506,19 @@ void enable_basic_clocks(void)
 	/* Enable 32 KHz clock for dwc3 */
 	setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
 		     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+	/* Enable 960 MHz clock for dwc3 */
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
+		     OPTFCLKEN_REFCLK960M);
+
+	/* Enable 32 KHz clock for dwc3 */
+	setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
+		     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+	/* Enable 60 MHz clock for USB2PHY2 */
+	setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
+		     L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
+#endif
 #endif
 
 	/* Set the correct clock dividers for mmc */
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index cd51fe7..99f847b 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -809,6 +809,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_clkmode_dpll_gmac			= 0x4a0052a8,
 	.cm_coreaon_usb_phy1_core_clkctrl	= 0x4a008640,
 	.cm_coreaon_usb_phy2_core_clkctrl	= 0x4a008688,
+	.cm_coreaon_l3init_60m_gfclk_clkctrl	= 0x4a0086c0,
 
 	/* cm1.mpu */
 	.cm_mpu_mpu_clkctrl			= 0x4a005320,
@@ -919,6 +920,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_l3init_ocp2scp1_clkctrl		= 0x4a0093e0,
 	.cm_l3init_ocp2scp3_clkctrl		= 0x4a0093e8,
 	.cm_l3init_usb_otg_ss1_clkctrl		= 0x4a0093f0,
+	.cm_l3init_usb_otg_ss2_clkctrl		= 0x4a009340,
 
 	/* cm2.l4per */
 	.cm_l4per_clkstctrl			= 0x4a009700,
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index f8e5630..38d50d6 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -172,6 +172,9 @@
 /* CM_COREAON_USB_PHY_CORE_CLKCTRL */
 #define USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K	(1 << 8)
 
+/* CM_COREAON_L3INIT_60M_GFCLK_CLKCTRL */
+#define L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK	(1 << 8)
+
 /* CM_L3INIT_USB_OTG_SS_CLKCTRL */
 #define OTG_SS_CLKCTRL_MODULEMODE_HW	(1 << 0)
 #define OPTFCLKEN_REFCLK960M			(1 << 8)
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 056affc..462a9ee 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -145,6 +145,7 @@ struct prcm_regs {
 	u32 cm_ssc_modfreqdiv_dpll_unipro;
 	u32 cm_coreaon_usb_phy1_core_clkctrl;
 	u32 cm_coreaon_usb_phy2_core_clkctrl;
+	u32 cm_coreaon_l3init_60m_gfclk_clkctrl;
 
 	/* cm2.core */
 	u32 cm_coreaon_bandgap_clkctrl;
@@ -231,6 +232,7 @@ struct prcm_regs {
 	u32 cm_l3init_ocp2scp1_clkctrl;
 	u32 cm_l3init_ocp2scp3_clkctrl;
 	u32 cm_l3init_usb_otg_ss1_clkctrl;
+	u32 cm_l3init_usb_otg_ss2_clkctrl;
 
 	u32 prm_irqstatus_mpu_2;
 
-- 
1.7.9.5