[U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller

[Maxime Ripard]

The A13-Olinuxino has a mini-USB connector that can be used to power up
the board and as an OTG connector.

Since we have already some USB host-only ports right beside this one,
enable it in gadget mode

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 configs/A13-OLinuXino_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 4b4337223ca5..70aa194b91c4 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=408
 CONFIG_DRAM_EMR1=0
+CONFIG_USB0_VBUS_DET="PG1"
 CONFIG_USB1_VBUS_PIN="PG11"
 CONFIG_AXP_GPIO=y
 # CONFIG_VIDEO_HDMI is not set
@@ -11,6 +12,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-- 
2.5.0