[U-Boot] [PATCH 10/15] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END

[Hans de Goede]

We currently only use the spl nand code to get u-boot itself, which
_always_ is located on a syndrome partition. Once we figure out how
we are going to store the u-boot env on nand, we may need non syndrome
support, but even then there will likely be better ways to determine
whether to use syndrome or not (e.g. look at the loadaddr passed in).

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/mtd/nand/Kconfig          | 8 --------
 drivers/mtd/nand/sunxi_nand_spl.c | 3 +--
 2 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 18039f7..8a3fae5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -95,14 +95,6 @@ config SPL_NAND_SUNXI
 	Depending on the NAND chip, values like ECC strength and page sizes
 	have to be configured.
 
-config NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END
-	hex "Size of syndrome partitions in sunxi NAND"
-	default 0x400000
-	depends on SPL_NAND_SUNXI
-	---help---
-	End address for boot partitions on NAND. Those partitions have a
-	different random seed that has to match the sunxi BROM setting.
-
 config NAND_SUNXI_SPL_ECC_STRENGTH
 	int "ECC Strength for sunxi NAND"
 	default 40
diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c
index 61eb393..9c304f4 100644
--- a/drivers/mtd/nand/sunxi_nand_spl.c
+++ b/drivers/mtd/nand/sunxi_nand_spl.c
@@ -297,8 +297,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest)
 	for (current_dest = dest;
 			current_dest < (dest + size);
 			current_dest += CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE) {
-		nand_read_page(offs, (dma_addr_t)current_dest,
-			offs < CONFIG_NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END,
+		nand_read_page(offs, (dma_addr_t)current_dest, 1,
 			&ecc_errors);
 		offs += CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE;
 	}
-- 
2.4.3