[U-Boot] [PATCH 04/45] arm: Remove snowball and u8500_href boards
Simon Glass
sjg at chromium.org
Mon Aug 31 03:18:58 CEST 2015
These boards have not been converted to generic board by the deadline.
Remove them.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/Kconfig | 10 -
arch/arm/include/asm/mach-types.h | 26 --
board/st-ericsson/snowball/Kconfig | 15 -
board/st-ericsson/snowball/MAINTAINERS | 6 -
board/st-ericsson/snowball/Makefile | 9 -
board/st-ericsson/snowball/db8500_pins.h | 745 -------------------------------
board/st-ericsson/snowball/snowball.c | 340 --------------
board/st-ericsson/u8500/Kconfig | 15 -
board/st-ericsson/u8500/MAINTAINERS | 6 -
board/st-ericsson/u8500/Makefile | 9 -
board/st-ericsson/u8500/gpio.c | 331 --------------
board/st-ericsson/u8500/u8500_href.c | 477 --------------------
configs/snowball_defconfig | 13 -
configs/u8500_href_defconfig | 13 -
include/configs/snowball.h | 232 ----------
include/configs/u8500_href.h | 198 --------
16 files changed, 2445 deletions(-)
delete mode 100644 board/st-ericsson/snowball/Kconfig
delete mode 100644 board/st-ericsson/snowball/MAINTAINERS
delete mode 100644 board/st-ericsson/snowball/Makefile
delete mode 100644 board/st-ericsson/snowball/db8500_pins.h
delete mode 100644 board/st-ericsson/snowball/snowball.c
delete mode 100644 board/st-ericsson/u8500/Kconfig
delete mode 100644 board/st-ericsson/u8500/MAINTAINERS
delete mode 100644 board/st-ericsson/u8500/Makefile
delete mode 100644 board/st-ericsson/u8500/gpio.c
delete mode 100644 board/st-ericsson/u8500/u8500_href.c
delete mode 100644 configs/snowball_defconfig
delete mode 100644 configs/u8500_href_defconfig
delete mode 100644 include/configs/snowball.h
delete mode 100644 include/configs/u8500_href.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0ef52bd..5429dc8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -662,14 +662,6 @@ config ARCH_SUNXI
select USB_STORAGE
select USB_KEYBOARD
-config TARGET_SNOWBALL
- bool "Support snowball"
- select CPU_V7
-
-config TARGET_U8500_HREF
- bool "Support u8500_href"
- select CPU_V7
-
config TARGET_VF610TWR
bool "Support vf610twr"
select CPU_V7
@@ -967,8 +959,6 @@ source "board/spear/spear310/Kconfig"
source "board/spear/spear320/Kconfig"
source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
-source "board/st-ericsson/snowball/Kconfig"
-source "board/st-ericsson/u8500/Kconfig"
source "board/st/stm32f429-discovery/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/sunxi/Kconfig"
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index 55a543a..d51be0b 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -402,7 +402,6 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_IGEP0020 2344
#define MACH_TYPE_NUC932EVB 2356
#define MACH_TYPE_OPENRD_CLIENT 2361
-#define MACH_TYPE_U8500 2368
#define MACH_TYPE_MX51_EFIKASB 2370
#define MACH_TYPE_MARVELL_JASPER 2382
#define MACH_TYPE_FLINT 2383
@@ -974,7 +973,6 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_RHINO 3360
#define MACH_TYPE_ARMLEX4210 3361
#define MACH_TYPE_SWARCOEXTMODEM 3362
-#define MACH_TYPE_SNOWBALL 3363
#define MACH_TYPE_PCM049 3364
#define MACH_TYPE_VIGOR 3365
#define MACH_TYPE_OSLO_AMUNDSEN 3366
@@ -5754,18 +5752,6 @@ extern unsigned int __machine_arch_type;
# define machine_is_openrd_client() (0)
#endif
-#ifdef CONFIG_MACH_U8500
-# ifdef machine_arch_type
-# undef machine_arch_type
-# define machine_arch_type __machine_arch_type
-# else
-# define machine_arch_type MACH_TYPE_U8500
-# endif
-# define machine_is_u8500() (machine_arch_type == MACH_TYPE_U8500)
-#else
-# define machine_is_u8500() (0)
-#endif
-
#ifdef CONFIG_MACH_MX51_EFIKASB
# ifdef machine_arch_type
# undef machine_arch_type
@@ -12618,18 +12604,6 @@ extern unsigned int __machine_arch_type;
# define machine_is_swarcoextmodem() (0)
#endif
-#ifdef CONFIG_MACH_SNOWBALL
-# ifdef machine_arch_type
-# undef machine_arch_type
-# define machine_arch_type __machine_arch_type
-# else
-# define machine_arch_type MACH_TYPE_SNOWBALL
-# endif
-# define machine_is_snowball() (machine_arch_type == MACH_TYPE_SNOWBALL)
-#else
-# define machine_is_snowball() (0)
-#endif
-
#ifdef CONFIG_MACH_PCM049
# ifdef machine_arch_type
# undef machine_arch_type
diff --git a/board/st-ericsson/snowball/Kconfig b/board/st-ericsson/snowball/Kconfig
deleted file mode 100644
index 0b3a0cc..0000000
--- a/board/st-ericsson/snowball/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_SNOWBALL
-
-config SYS_BOARD
- default "snowball"
-
-config SYS_VENDOR
- default "st-ericsson"
-
-config SYS_SOC
- default "u8500"
-
-config SYS_CONFIG_NAME
- default "snowball"
-
-endif
diff --git a/board/st-ericsson/snowball/MAINTAINERS b/board/st-ericsson/snowball/MAINTAINERS
deleted file mode 100644
index 132fc52..0000000
--- a/board/st-ericsson/snowball/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SNOWBALL BOARD
-M: Mathieu Poirier <mathieu.poirier at linaro.org>
-S: Maintained
-F: board/st-ericsson/snowball/
-F: include/configs/snowball.h
-F: configs/snowball_defconfig
diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile
deleted file mode 100644
index f0605e2..0000000
--- a/board/st-ericsson/snowball/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright (C) ST-Ericsson SA 2009
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ccflags-y += -D__RELEASE -D__STN_8500
-
-obj-y := snowball.o
diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h
deleted file mode 100644
index e339cb8..0000000
--- a/board/st-ericsson/snowball/db8500_pins.h
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
- * The purpose is that GPIO config found in kernel should work by simply
- * copy-paste it to U-boot.
- *
- * Ported to U-boot by:
- * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com>
- **
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent at stericsson.com>
- */
-
-#ifndef __DB8500_PINS_H
-#define __DB8500_PINS_H
-
-#include <asm/arch/db8500_pincfg.h>
-
-#define GPIO0_GPIO PIN_CFG(0, GPIO)
-#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A)
-#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B)
-#define GPIO0_IP_TDO PIN_CFG(0, ALT_C)
-
-#define GPIO1_GPIO PIN_CFG(1, GPIO)
-#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A)
-#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B)
-#define GPIO1_IP_TDI PIN_CFG(1, ALT_C)
-
-#define GPIO2_GPIO PIN_CFG(2, GPIO)
-#define GPIO2_U0_RXD PIN_CFG(2, ALT_A)
-#define GPIO2_NONE PIN_CFG(2, ALT_B)
-#define GPIO2_IP_TMS PIN_CFG(2, ALT_C)
-
-#define GPIO3_GPIO PIN_CFG(3, GPIO)
-#define GPIO3_U0_TXD PIN_CFG(3, ALT_A)
-#define GPIO3_NONE PIN_CFG(3, ALT_B)
-#define GPIO3_IP_TCK PIN_CFG(3, ALT_C)
-
-#define GPIO4_GPIO PIN_CFG(4, GPIO)
-#define GPIO4_U1_RXD PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP)
-#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C)
-
-#define GPIO5_GPIO PIN_CFG(5, GPIO)
-#define GPIO5_U1_TXD PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP)
-#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C)
-
-#define GPIO6_GPIO PIN_CFG(6, GPIO)
-#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP)
-#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C)
-
-#define GPIO7_GPIO PIN_CFG(7, GPIO)
-#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP)
-#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C)
-
-#define GPIO8_GPIO PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP)
-#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP)
-
-#define GPIO9_GPIO PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP)
-#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP)
-
-#define GPIO10_GPIO PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP)
-#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP)
-#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C)
-
-#define GPIO11_GPIO PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP)
-#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP)
-#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C)
-
-#define GPIO12_GPIO PIN_CFG(12, GPIO)
-#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A)
-#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO PIN_CFG(13, GPIO)
-#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A)
-
-#define GPIO14_GPIO PIN_CFG(14, GPIO)
-#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A)
-
-#define GPIO15_GPIO PIN_CFG(15, GPIO)
-#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A)
-#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO PIN_CFG(16, GPIO)
-#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP)
-#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C)
-
-#define GPIO17_GPIO PIN_CFG(17, GPIO)
-#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP)
-#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C)
-
-#define GPIO18_GPIO PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A)
-#define GPIO18_U2_RXD PIN_CFG(18, ALT_B)
-#define GPIO18_MS_IEP PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A)
-#define GPIO19_U2_TXD PIN_CFG(19, ALT_B)
-#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C)
-
-#define GPIO20_GPIO PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A)
-#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B)
-#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C)
-
-#define GPIO21_GPIO PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A)
-#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B)
-#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C)
-
-#define GPIO22_GPIO PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A)
-#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B)
-#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C)
-
-#define GPIO23_GPIO PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A)
-#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B)
-#define GPIO23_MS_CLK PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A)
-#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B)
-#define GPIO24_MS_BS PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A)
-#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B)
-#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A)
-#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B)
-#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C)
-
-#define GPIO27_GPIO PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A)
-#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B)
-#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C)
-
-#define GPIO28_GPIO PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A)
-#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B)
-#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C)
-
-#define GPIO29_GPIO PIN_CFG(29, GPIO)
-#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A)
-#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B)
-#define GPIO29_U2_RXD PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A)
-#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B)
-#define GPIO30_U2_TXD PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A)
-#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B)
-#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO PIN_CFG(32, GPIO)
-#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A)
-#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B)
-#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C)
-
-#define GPIO33_GPIO PIN_CFG(33, GPIO)
-#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A)
-#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B)
-#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C)
-
-#define GPIO34_GPIO PIN_CFG(34, GPIO)
-#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A)
-#define GPIO34_NONE PIN_CFG(34, ALT_B)
-#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C)
-
-#define GPIO35_GPIO PIN_CFG(35, GPIO)
-#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A)
-#define GPIO35_NONE PIN_CFG(35, ALT_B)
-#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C)
-
-#define GPIO36_GPIO PIN_CFG(36, GPIO)
-#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A)
-#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B)
-#define GPIO36_U0_RIn PIN_CFG(36, ALT_C)
-
-#define GPIO64_GPIO PIN_CFG(64, GPIO)
-#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A)
-#define GPIO64_KP_O1 PIN_CFG(64, ALT_B)
-#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C)
-
-#define GPIO65_GPIO PIN_CFG(65, GPIO)
-#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A)
-#define GPIO65_KP_O0 PIN_CFG(65, ALT_B)
-#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C)
-
-#define GPIO66_GPIO PIN_CFG(66, GPIO)
-#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A)
-#define GPIO66_KP_I1 PIN_CFG(66, ALT_B)
-#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C)
-
-#define GPIO67_GPIO PIN_CFG(67, GPIO)
-#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A)
-#define GPIO67_KP_I0 PIN_CFG(67, ALT_B)
-#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C)
-
-#define GPIO68_GPIO PIN_CFG(68, GPIO)
-#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A)
-#define GPIO68_KP_O7 PIN_CFG(68, ALT_B)
-#define GPIO68_SM_CLE PIN_CFG(68, ALT_C)
-
-#define GPIO69_GPIO PIN_CFG(69, GPIO)
-#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A)
-#define GPIO69_KP_I7 PIN_CFG(69, ALT_B)
-#define GPIO69_SM_ALE PIN_CFG(69, ALT_C)
-
-#define GPIO70_GPIO PIN_CFG(70, GPIO)
-#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A)
-#define GPIO70_KP_O5 PIN_CFG(70, ALT_B)
-#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C)
-
-#define GPIO71_GPIO PIN_CFG(71, GPIO)
-#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A)
-#define GPIO71_KP_O4 PIN_CFG(71, ALT_B)
-#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C)
-
-#define GPIO72_GPIO PIN_CFG(72, GPIO)
-#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A)
-#define GPIO72_KP_O3 PIN_CFG(72, ALT_B)
-#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C)
-
-#define GPIO73_GPIO PIN_CFG(73, GPIO)
-#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A)
-#define GPIO73_KP_O2 PIN_CFG(73, ALT_B)
-#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C)
-
-#define GPIO74_GPIO PIN_CFG(74, GPIO)
-#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A)
-#define GPIO74_KP_I5 PIN_CFG(74, ALT_B)
-#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C)
-
-#define GPIO75_GPIO PIN_CFG(75, GPIO)
-#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A)
-#define GPIO75_KP_I4 PIN_CFG(75, ALT_B)
-#define GPIO75_U2_RXD PIN_CFG(75, ALT_C)
-
-#define GPIO76_GPIO PIN_CFG(76, GPIO)
-#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A)
-#define GPIO76_KP_I3 PIN_CFG(76, ALT_B)
-#define GPIO76_U2_TXD PIN_CFG(76, ALT_C)
-
-#define GPIO77_GPIO PIN_CFG(77, GPIO)
-#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A)
-#define GPIO77_KP_I2 PIN_CFG(77, ALT_B)
-#define GPIO77_NONE PIN_CFG(77, ALT_C)
-
-#define GPIO78_GPIO PIN_CFG(78, GPIO)
-#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A)
-#define GPIO78_KP_O6 PIN_CFG(78, ALT_B)
-#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C)
-
-#define GPIO79_GPIO PIN_CFG(79, GPIO)
-#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A)
-#define GPIO79_KP_I6 PIN_CFG(79, ALT_B)
-#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C)
-
-#define GPIO80_GPIO PIN_CFG(80, GPIO)
-#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A)
-#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B)
-#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C)
-
-#define GPIO81_GPIO PIN_CFG(81, GPIO)
-#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A)
-#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B)
-#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C)
-
-#define GPIO82_GPIO PIN_CFG(82, GPIO)
-#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A)
-#define GPIO82_KP_O5 PIN_CFG(82, ALT_B)
-
-#define GPIO83_GPIO PIN_CFG(83, GPIO)
-#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A)
-#define GPIO83_KP_O4 PIN_CFG(83, ALT_B)
-
-#define GPIO84_GPIO PIN_CFG_PULL(84, GPIO, UP)
-#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A)
-#define GPIO84_KP_I5 PIN_CFG(84, ALT_B)
-
-#define GPIO85_GPIO PIN_CFG(85, GPIO)
-#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A)
-#define GPIO85_KP_I4 PIN_CFG(85, ALT_B)
-
-#define GPIO86_GPIO PIN_CFG(86, GPIO)
-#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A)
-#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B)
-#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C)
-
-#define GPIO87_GPIO PIN_CFG(87, GPIO)
-#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A)
-#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B)
-#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C)
-
-#define GPIO88_GPIO PIN_CFG(88, GPIO)
-#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A)
-#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B)
-#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C)
-
-#define GPIO89_GPIO PIN_CFG(89, GPIO)
-#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A)
-#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B)
-#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C)
-
-#define GPIO90_GPIO PIN_CFG(90, GPIO)
-#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A)
-#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B)
-#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C)
-
-#define GPIO91_GPIO PIN_CFG(91, GPIO)
-#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A)
-#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B)
-#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C)
-
-#define GPIO92_GPIO PIN_CFG(92, GPIO)
-#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A)
-#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B)
-#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C)
-
-#define GPIO93_GPIO PIN_CFG(93, GPIO)
-#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A)
-#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B)
-#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C)
-
-#define GPIO94_GPIO PIN_CFG(94, GPIO)
-#define GPIO94_KP_O7 PIN_CFG(94, ALT_A)
-#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B)
-#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C)
-
-#define GPIO95_GPIO PIN_CFG(95, GPIO)
-#define GPIO95_KP_I7 PIN_CFG(95, ALT_A)
-#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B)
-#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C)
-
-#define GPIO96_GPIO PIN_CFG(96, GPIO)
-#define GPIO96_KP_O6 PIN_CFG(96, ALT_A)
-#define GPIO96_SM_OEn PIN_CFG(96, ALT_B)
-#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO PIN_CFG(97, GPIO)
-#define GPIO97_KP_I6 PIN_CFG(97, ALT_A)
-#define GPIO97_SM_WEn PIN_CFG(97, ALT_B)
-#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C)
-
-#define GPIO128_GPIO PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A)
-#define GPIO128_SM_CKO PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A)
-#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A)
-#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B)
-#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C)
-
-#define GPIO131_GPIO PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A)
-#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A)
-#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B)
-
-#define GPIO133_GPIO PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A)
-#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B)
-
-#define GPIO134_GPIO PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A)
-#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B)
-
-#define GPIO135_GPIO PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A)
-#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B)
-
-#define GPIO136_GPIO PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A)
-#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B)
-
-#define GPIO137_GPIO PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A)
-#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B)
-
-#define GPIO138_GPIO PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A)
-#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B)
-
-#define GPIO139_GPIO PIN_CFG(139, GPIO)
-#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A)
-#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B)
-#define GPIO139_KP_O8 PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO PIN_CFG(140, GPIO)
-#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A)
-#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B)
-#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO PIN_CFG(141, GPIO)
-#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A)
-#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B)
-#define GPIO141_KP_O9 PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO PIN_CFG(142, GPIO)
-#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A)
-#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B)
-#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO PIN_CFG(143, GPIO)
-#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A)
-
-#define GPIO144_GPIO PIN_CFG(144, GPIO)
-#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A)
-
-#define GPIO145_GPIO PIN_CFG(145, GPIO)
-#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A)
-
-#define GPIO146_GPIO PIN_CFG(146, GPIO)
-#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A)
-
-#define GPIO147_GPIO PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP)
-
-#define GPIO148_GPIO PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP)
-
-#define GPIO149_GPIO PIN_CFG(149, GPIO)
-#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A)
-#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B)
-#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C)
-
-#define GPIO150_GPIO PIN_CFG(150, GPIO)
-#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A)
-#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B)
-
-#define GPIO151_GPIO PIN_CFG(151, GPIO)
-#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A)
-#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B)
-#define GPIO151_KP_O8 PIN_CFG(151, ALT_C)
-
-#define GPIO152_GPIO PIN_CFG(152, GPIO)
-#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A)
-#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B)
-#define GPIO152_KP_O9 PIN_CFG(152, ALT_C)
-
-#define GPIO153_GPIO PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN)
-#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B)
-#define GPIO153_U2_RXD PIN_CFG(153, ALT_C)
-
-#define GPIO154_GPIO PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN)
-#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B)
-#define GPIO154_U2_TXD PIN_CFG(154, ALT_C)
-
-#define GPIO155_GPIO PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN)
-#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B)
-#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C)
-
-#define GPIO156_GPIO PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN)
-#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B)
-#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C)
-
-#define GPIO157_GPIO PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP)
-#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B)
-#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C)
-
-#define GPIO158_GPIO PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP)
-#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B)
-#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C)
-
-#define GPIO159_GPIO PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP)
-#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B)
-#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C)
-
-#define GPIO160_GPIO PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP)
-#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B)
-#define GPIO160_NONE PIN_CFG(160, ALT_C)
-
-#define GPIO161_GPIO PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN)
-#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B)
-#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C)
-
-#define GPIO162_GPIO PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN)
-#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B)
-#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C)
-
-#define GPIO163_GPIO PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN)
-#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B)
-#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C)
-
-#define GPIO164_GPIO PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP)
-#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B)
-#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C)
-
-#define GPIO165_GPIO PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP)
-#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B)
-#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP)
-#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B)
-#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP)
-#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B)
-#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP)
-#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B)
-#define GPIO168_NONE PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO PIN_CFG(169, GPIO)
-#define GPIO169_RF_PURn PIN_CFG(169, ALT_A)
-#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B)
-#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO PIN_CFG(170, GPIO)
-#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A)
-#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B)
-#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C)
-
-#define GPIO171_GPIO PIN_CFG(171, GPIO)
-#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A)
-#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B)
-#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C)
-
-#define GPIO192_GPIO PIN_CFG(192, GPIO)
-#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A)
-
-#define GPIO193_GPIO PIN_CFG(193, GPIO)
-#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A)
-
-#define GPIO194_GPIO PIN_CFG(194, GPIO)
-#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A)
-
-#define GPIO195_GPIO PIN_CFG(195, GPIO)
-#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A)
-
-#define GPIO196_GPIO PIN_CFG(196, GPIO)
-#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A)
-
-#define GPIO197_GPIO PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A)
-
-#define GPIO198_GPIO PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A)
-
-#define GPIO199_GPIO PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A)
-
-#define GPIO200_GPIO PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A)
-
-#define GPIO201_GPIO PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A)
-
-#define GPIO202_GPIO PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A)
-#define GPIO202_PWL PIN_CFG(202, ALT_B)
-#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C)
-
-#define GPIO203_GPIO PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A)
-
-#define GPIO204_GPIO PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A)
-
-#define GPIO205_GPIO PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A)
-
-#define GPIO206_GPIO PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A)
-
-#define GPIO207_GPIO PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A)
-
-#define GPIO208_GPIO PIN_CFG(208, GPIO)
-#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A)
-
-#define GPIO209_GPIO PIN_CFG(209, GPIO)
-#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A)
-#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B)
-
-#define GPIO210_GPIO PIN_CFG(210, GPIO)
-#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A)
-
-#define GPIO211_GPIO PIN_CFG(211, GPIO)
-#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A)
-
-#define GPIO212_GPIO PIN_CFG(212, GPIO)
-#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A)
-#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO PIN_CFG(213, GPIO)
-#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A)
-#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B)
-
-#define GPIO214_GPIO PIN_CFG(214, GPIO)
-#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A)
-#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B)
-
-#define GPIO215_GPIO PIN_CFG(215, GPIO)
-#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A)
-#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B)
-#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO PIN_CFG(216, GPIO)
-#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A)
-#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP)
-
-#define GPIO217_GPIO PIN_CFG(217, GPIO)
-#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A)
-#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B)
-#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO PIN_CFG(218, GPIO)
-#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A)
-#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP)
-
-#define GPIO219_GPIO PIN_CFG(219, GPIO)
-#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A)
-#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO PIN_CFG(220, GPIO)
-#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A)
-#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B)
-#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C)
-
-#define GPIO221_GPIO PIN_CFG(221, GPIO)
-#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A)
-#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO PIN_CFG(222, GPIO)
-#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A)
-#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO PIN_CFG(223, GPIO)
-#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A)
-#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B)
-#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C)
-
-#define GPIO224_GPIO PIN_CFG(224, GPIO)
-#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A)
-#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B)
-#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C)
-
-#define GPIO225_GPIO PIN_CFG(225, GPIO)
-#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A)
-#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B)
-#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C)
-
-#define GPIO226_GPIO PIN_CFG(226, GPIO)
-#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A)
-#define GPIO226_PWL PIN_CFG(226, ALT_B)
-#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C)
-
-#define GPIO227_GPIO PIN_CFG(227, GPIO)
-#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A)
-
-#define GPIO228_GPIO PIN_CFG(228, GPIO)
-#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A)
-
-#define GPIO229_GPIO PIN_CFG(229, GPIO)
-#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A)
-#define GPIO229_PWL PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP)
-
-#define GPIO230_GPIO PIN_CFG(230, GPIO)
-#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A)
-#define GPIO230_PWL PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP)
-
-#define GPIO256_GPIO PIN_CFG(256, GPIO)
-#define GPIO256_USB_NXT PIN_CFG(256, ALT_A)
-
-#define GPIO257_GPIO PIN_CFG(257, GPIO)
-#define GPIO257_USB_STP PIN_CFG(257, ALT_A)
-
-#define GPIO258_GPIO PIN_CFG(258, GPIO)
-#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A)
-#define GPIO258_NONE PIN_CFG(258, ALT_B)
-#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C)
-
-#define GPIO259_GPIO PIN_CFG(259, GPIO)
-#define GPIO259_USB_DIR PIN_CFG(259, ALT_A)
-
-#define GPIO260_GPIO PIN_CFG(260, GPIO)
-#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A)
-
-#define GPIO261_GPIO PIN_CFG(261, GPIO)
-#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A)
-
-#define GPIO262_GPIO PIN_CFG(262, GPIO)
-#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A)
-
-#define GPIO263_GPIO PIN_CFG(263, GPIO)
-#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A)
-
-#define GPIO264_GPIO PIN_CFG(264, GPIO)
-#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A)
-
-#define GPIO265_GPIO PIN_CFG(265, GPIO)
-#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A)
-
-#define GPIO266_GPIO PIN_CFG(266, GPIO)
-#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A)
-
-#define GPIO267_GPIO PIN_CFG(267, GPIO)
-#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A)
-
-#endif
diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c
deleted file mode 100644
index c3061e2..0000000
--- a/board/st-ericsson/snowball/snowball.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <malloc.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/db8500_pincfg.h>
-#include <asm/arch/prcmu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/sys_proto.h>
-
-#ifdef CONFIG_MMC
-#include "../../../drivers/mmc/arm_pl180_mmci.h"
-#endif
-#include "db8500_pins.h"
-
-/*
- * Get a global data pointer
- */
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Memory controller register
- */
-#define DMC_BASE_ADDR 0x80156000
-#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184)
-
-/*
- * GPIO pin config common for MOP500/HREF boards
- */
-unsigned long gpio_cfg_common[] = {
- /* I2C */
- GPIO147_I2C0_SCL,
- GPIO148_I2C0_SDA,
- GPIO16_I2C1_SCL,
- GPIO17_I2C1_SDA,
- GPIO10_I2C2_SDA,
- GPIO11_I2C2_SCL,
- GPIO229_I2C3_SDA,
- GPIO230_I2C3_SCL,
-
- /* SSP0, to AB8500 */
- GPIO143_SSP0_CLK,
- GPIO144_SSP0_FRM,
- GPIO145_SSP0_RXD | PIN_PULL_DOWN,
- GPIO146_SSP0_TXD,
-
- /* MMC0 (MicroSD card) */
- GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH,
- GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH,
- GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH,
- GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
- GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL,
- GPIO23_MC0_CLK | PIN_OUTPUT_LOW,
- GPIO24_MC0_CMD | PIN_INPUT_PULLUP,
- GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP,
- GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP,
- GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP,
- GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP,
-
- /* MMC4 (On-board eMMC) */
- GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP,
- GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP,
- GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP,
- GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP,
- GPIO201_MC4_CMD | PIN_INPUT_PULLUP,
- GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL,
- GPIO203_MC4_CLK | PIN_OUTPUT_LOW,
- GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP,
- GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP,
- GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP,
- GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP,
-
- /* UART2, console */
- GPIO29_U2_RXD | PIN_INPUT_PULLUP,
- GPIO30_U2_TXD | PIN_OUTPUT_HIGH,
- GPIO31_U2_CTSn | PIN_INPUT_PULLUP,
- GPIO32_U2_RTSn | PIN_OUTPUT_HIGH,
-
- /*
- * USB, pin 256-267 USB, Is probably already setup correctly from
- * BootROM/boot stages, but we don't trust that and set it up anyway
- */
- GPIO256_USB_NXT,
- GPIO257_USB_STP,
- GPIO258_USB_XCLK,
- GPIO259_USB_DIR,
- GPIO260_USB_DAT7,
- GPIO261_USB_DAT6,
- GPIO262_USB_DAT5,
- GPIO263_USB_DAT4,
- GPIO264_USB_DAT3,
- GPIO265_USB_DAT2,
- GPIO266_USB_DAT1,
- GPIO267_USB_DAT0,
-};
-
-unsigned long gpio_cfg_snowball[] = {
- /* MMC0 (MicroSD card) */
- GPIO217_GPIO | PIN_OUTPUT_HIGH, /* MMC_EN */
- GPIO218_GPIO | PIN_INPUT_NOPULL, /* MMC_CD */
- GPIO228_GPIO | PIN_OUTPUT_HIGH, /* SD_SEL */
-
- /* eMMC */
- GPIO167_GPIO | PIN_OUTPUT_HIGH, /* RSTn_MLC */
-
- /* LAN */
- GPIO131_SM_ADQ8,
- GPIO132_SM_ADQ9,
- GPIO133_SM_ADQ10,
- GPIO134_SM_ADQ11,
- GPIO135_SM_ADQ12,
- GPIO136_SM_ADQ13,
- GPIO137_SM_ADQ14,
- GPIO138_SM_ADQ15,
-
- /* RSTn_LAN */
- GPIO141_GPIO | PIN_OUTPUT_HIGH,
-};
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
- /*
- * Setup board (bd) and board-info (bi).
- * bi_arch_number: Unique id for this board. It will passed in r1 to
- * Linux startup code and is the machine_id.
- * bi_boot_params: Where this board expects params.
- */
- gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL;
- gd->bd->bi_boot_params = 0x00000100;
-
- /* Configure GPIO pins needed by U-boot */
- db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common));
-
- db8500_gpio_config_pins(gpio_cfg_snowball,
- ARRAY_SIZE(gpio_cfg_snowball));
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
- gd->ram_size = gd->bd->bi_dram[0].size =
- get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- return 0;
-}
-
-static int raise_ab8500_gpio16(void)
-{
- int ret;
-
- /* selection */
- ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG);
- if (ret < 0)
- goto out;
-
- ret |= 0x80;
- ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret);
- if (ret < 0)
- goto out;
-
- /* direction */
- ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG);
- if (ret < 0)
- goto out;
-
- ret |= 0x80;
- ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret);
- if (ret < 0)
- goto out;
-
- /* out */
- ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG);
- if (ret < 0)
- goto out;
-
- ret |= 0x80;
- ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret);
-
-out:
- return ret;
-}
-
-static int raise_ab8500_gpio26(void)
-{
- int ret;
-
- /* selection */
- ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG);
- if (ret < 0)
- goto out;
-
- ret |= 0x2;
- ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret);
- if (ret < 0)
- goto out;
-
- /* out */
- ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG);
- if (ret < 0)
- goto out;
-
- ret |= 0x2;
- ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret);
-
-out:
- return ret;
-}
-
-int board_late_init(void)
-{
- /* enable 3V3 for LAN controller */
- if (raise_ab8500_gpio26() >= 0) {
- /* Turn on FSMC device */
- writel(0x1, 0x8000f000);
- writel(0x1, 0x8000f008);
-
- /* setup FSMC for LAN controler */
- writel(0x305b, 0x80000000);
-
- /* run at the highest possible speed */
- writel(0x01010210, 0x80000004);
- } else
- printf("error: can't raise GPIO26\n");
-
- /* enable 3v6 for GBF chip */
- if ((raise_ab8500_gpio16() < 0))
- printf("error: cant' raise GPIO16\n");
-
- /* empty UART RX FIFO */
- while (tstc())
- (void) getc();
-
- return 0;
-}
-
-#ifdef CONFIG_MMC
-/*
- * emmc_host_init - initialize the emmc controller.
- * Configure GPIO settings, set initial clock and power for emmc slot.
- * Initialize mmc struct and register with mmc framework.
- */
-static int emmc_host_init(void)
-{
- struct pl180_mmc_host *host;
-
- host = malloc(sizeof(struct pl180_mmc_host));
- if (!host)
- return -ENOMEM;
- memset(host, 0, sizeof(*host));
-
- host->base = (struct sdi_registers *)CFG_EMMC_BASE;
- host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
- host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
- SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
- strcpy(host->name, "EMMC");
- host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz;
- host->voltages = VOLTAGE_WINDOW_MMC;
- host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
- host->clock_max = ARM_MCLK / 2;
- host->clock_in = ARM_MCLK;
- host->version2 = 1;
-
- return arm_pl180_mmci_init(host);
-}
-
-/*
- * mmc_host_init - initialize the external mmc controller.
- * Configure GPIO settings, set initial clock and power for mmc slot.
- * Initialize mmc struct and register with mmc framework.
- */
-static int mmc_host_init(void)
-{
- struct pl180_mmc_host *host;
- u32 sdi_u32;
-
- host = malloc(sizeof(struct pl180_mmc_host));
- if (!host)
- return -ENOMEM;
- memset(host, 0, sizeof(*host));
-
- host->base = (struct sdi_registers *)CFG_MMC_BASE;
- sdi_u32 = 0xBF;
- writel(sdi_u32, &host->base->power);
- host->pwr_init = 0xBF;
- host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
- SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
- strcpy(host->name, "MMC");
- host->caps = MMC_MODE_8BIT;
- host->b_max = 0;
- host->voltages = VOLTAGE_WINDOW_SD;
- host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
- host->clock_max = ARM_MCLK / 2;
- host->clock_in = ARM_MCLK;
- host->version2 = 1;
-
- return arm_pl180_mmci_init(host);
-}
-
-/*
- * board_mmc_init - initialize all the mmc/sd host controllers.
- * Called by generic mmc framework.
- */
-int board_mmc_init(bd_t *bis)
-{
- int error;
-
- (void) bis;
-
- error = emmc_host_init();
- if (error) {
- printf("emmc_host_init() %d\n", error);
- return -1;
- }
-
- u8500_mmc_power_init();
-
- error = mmc_host_init();
- if (error) {
- printf("mmc_host_init() %d\n", error);
- return -1;
- }
-
- return 0;
-}
-#endif /* CONFIG_MMC */
diff --git a/board/st-ericsson/u8500/Kconfig b/board/st-ericsson/u8500/Kconfig
deleted file mode 100644
index 909f30d..0000000
--- a/board/st-ericsson/u8500/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_U8500_HREF
-
-config SYS_BOARD
- default "u8500"
-
-config SYS_VENDOR
- default "st-ericsson"
-
-config SYS_SOC
- default "u8500"
-
-config SYS_CONFIG_NAME
- default "u8500_href"
-
-endif
diff --git a/board/st-ericsson/u8500/MAINTAINERS b/board/st-ericsson/u8500/MAINTAINERS
deleted file mode 100644
index e2581eb..0000000
--- a/board/st-ericsson/u8500/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-U8500 BOARD
-#M: -
-S: Maintained
-F: board/st-ericsson/u8500/
-F: include/configs/u8500_href.h
-F: configs/u8500_href_defconfig
diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile
deleted file mode 100644
index d6c4280..0000000
--- a/board/st-ericsson/u8500/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright (C) ST-Ericsson SA 2009
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ccflags-y += -D__RELEASE -D__STN_8500
-
-obj-y := u8500_href.o gpio.o
diff --git a/board/st-ericsson/u8500/gpio.c b/board/st-ericsson/u8500/gpio.c
deleted file mode 100644
index 2ddc7af..0000000
--- a/board/st-ericsson/u8500/gpio.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/gpio.h>
-
-static struct gpio_register *addr_gpio_register[] = {
- (void *)U8500_GPIO_0_BASE,
- (void *)U8500_GPIO_1_BASE,
- (void *)U8500_GPIO_2_BASE,
- (void *)U8500_GPIO_3_BASE,
- (void *)U8500_GPIO_4_BASE,
- (void *)U8500_GPIO_5_BASE,
- (void *)U8500_GPIO_6_BASE,
- (void *)U8500_GPIO_7_BASE,
- (void *)U8500_GPIO_8_BASE,
-};
-
-struct gpio_altfun_data altfun_table[] = {
- {
- .altfun = GPIO_ALT_I2C_0,
- .start = 147,
- .end = 148,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_I2C_1,
- .start = 16,
- .end = 17,
- .cont = 0,
- .type = GPIO_ALTF_B,
- },
- {
- .altfun = GPIO_ALT_I2C_2,
- .start = 10,
- .end = 11,
- .cont = 0,
- .type = GPIO_ALTF_B,
- },
- {
- .altfun = GPIO_ALT_I2C_3,
- .start = 229,
- .end = 230,
- .cont = 0,
- .type = GPIO_ALTF_C,
- },
- {
- .altfun = GPIO_ALT_UART_0_MODEM,
- .start = 0,
- .end = 3,
- .cont = 1,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_UART_0_MODEM,
- .start = 33,
- .end = 36,
- .cont = 0,
- .type = GPIO_ALTF_C,
- },
- {
- .altfun = GPIO_ALT_UART_1,
- .start = 4,
- .end = 7,
- .cont = 0,
- .type =
- GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_UART_2,
- .start = 18,
- .end = 19,
- .cont = 1,
- .type = GPIO_ALTF_B,
- },
- {
- .altfun = GPIO_ALT_UART_2,
- .start = 29,
- .end = 32,
- .cont = 0,
- .type = GPIO_ALTF_C,
- },
- {
- .altfun = GPIO_ALT_MSP_0,
- .start = 12,
- .end = 17,
- .cont = 1,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_MSP_0,
- .start = 21,
- .end = 21,
- .cont = 0,
- .type = GPIO_ALTF_B,
- },
- {
- .altfun = GPIO_ALT_MSP_1,
- .start = 33,
- .end = 36,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_MSP_2,
- .start = 192,
- .end = 196,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_LCD_PANEL,
- .start = 64,
- .end = 93,
- .cont = 1,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_LCD_PANEL,
- .start = 150,
- .end = 171,
- .cont = 0,
- .type = GPIO_ALTF_B,
- },
- {
- .altfun = GPIO_ALT_SD_CARD0,
- .start = 18,
- .end = 28,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_MM_CARD0,
- .start = 18,
- .end = 32,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_USB_OTG,
- .start = 256,
- .end = 267,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_EMMC,
- .start = 197,
- .end = 207,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
- {
- .altfun = GPIO_ALT_POP_EMMC,
- .start = 128,
- .end = 138,
- .cont = 0,
- .type = GPIO_ALTF_A,
- },
-};
-
-/*
- * Static Function declarations
- */
-enum gpio_error gpio_setpinconfig(int pin_id, struct gpio_config *config)
-{
- struct gpio_register *p_gpio_register =
- addr_gpio_register[GPIO_BLOCK(pin_id)];
- u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
- enum gpio_error error = GPIO_OK;
- u32 temp_reg;
-
- switch (config->mode) {
- case GPIO_ALTF_A:
- temp_reg = readl(&p_gpio_register->gpio_afsa);
- temp_reg |= mask;
- writel(temp_reg, &p_gpio_register->gpio_afsa);
- temp_reg = readl(&p_gpio_register->gpio_afsb);
- temp_reg &= ~mask;
- writel(temp_reg, &p_gpio_register->gpio_afsb);
- break;
- case GPIO_ALTF_B:
- temp_reg = readl(&p_gpio_register->gpio_afsa);
- temp_reg &= ~mask;
- writel(temp_reg, &p_gpio_register->gpio_afsa);
- temp_reg = readl(&p_gpio_register->gpio_afsb);
- temp_reg |= mask;
- writel(temp_reg, &p_gpio_register->gpio_afsb);
- break;
- case GPIO_ALTF_C:
- temp_reg = readl(&p_gpio_register->gpio_afsa);
- temp_reg |= mask;
- writel(temp_reg, &p_gpio_register->gpio_afsa);
- temp_reg = readl(&p_gpio_register->gpio_afsb);
- temp_reg |= mask;
- writel(temp_reg, &p_gpio_register->gpio_afsb);
- break;
- case GPIO_MODE_SOFTWARE:
- temp_reg = readl(&p_gpio_register->gpio_afsa);
- temp_reg &= ~mask;
- writel(temp_reg, &p_gpio_register->gpio_afsa);
- temp_reg = readl(&p_gpio_register->gpio_afsb);
- temp_reg &= ~mask;
- writel(temp_reg, &p_gpio_register->gpio_afsb);
-
- switch (config->direction) {
- case GPIO_DIR_INPUT:
- writel(mask, &p_gpio_register->gpio_dirc);
- break;
- case GPIO_DIR_OUTPUT:
- writel(mask, &p_gpio_register->gpio_dirs);
- break;
- case GPIO_DIR_LEAVE_UNCHANGED:
- break;
- default:
- return GPIO_INVALID_PARAMETER;
- }
-
- break;
- case GPIO_MODE_LEAVE_UNCHANGED:
- break;
- default:
- return GPIO_INVALID_PARAMETER;
- }
- return error;
-}
-
-enum gpio_error gpio_resetgpiopin(int pin_id, char *dev_name)
-{
- struct gpio_register *p_gpio_register =
- addr_gpio_register[GPIO_BLOCK(pin_id)];
- u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
- enum gpio_error error = GPIO_OK;
- u32 temp_reg;
-
- temp_reg = readl(&p_gpio_register->gpio_afsa);
- temp_reg &= ~mask;
- writel(temp_reg, &p_gpio_register->gpio_afsa);
- temp_reg = readl(&p_gpio_register->gpio_afsb);
- temp_reg &= ~mask;
- writel(temp_reg, &p_gpio_register->gpio_afsb);
- writel(mask, &p_gpio_register->gpio_dirc);
-
- return error;
-}
-
-struct gpio_config altfun_pinconfig;
-enum gpio_error gpio_altfunction(enum gpio_alt_function alt_func,
- int which_altfunc, char *dev_name)
-{
- int i, j, start, end;
- enum gpio_error error = -1;
-
- for (i = 0; i < ARRAY_SIZE(altfun_table); i++) {
- if (altfun_table[i].altfun != alt_func)
- continue;
-
- start = altfun_table[i].start;
- end = altfun_table[i].end;
- for (j = start; j <= end; j++) {
- if (which_altfunc == GPIO_ALTF_FIND)
- altfun_pinconfig.mode = altfun_table[i].type;
- else
- altfun_pinconfig.mode = which_altfunc;
- altfun_pinconfig.direction = GPIO_DIR_OUTPUT;
- altfun_pinconfig.dev_name = dev_name;
-
- if (which_altfunc != GPIO_ALTF_DISABLE)
- error = gpio_setpinconfig(j, &altfun_pinconfig);
- else
- error = gpio_resetgpiopin(j, dev_name);
- if (!error)
- continue;
- printf("GPIO %d configuration failure (nmdk_error:%d)",
- j, error);
- error = GPIO_INVALID_PARAMETER;
- return error;
- }
-
- if (!altfun_table[i].cont)
- break;
- }
- return error;
-}
-
-int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name)
-{
- struct gpio_register *p_gpio_register =
- addr_gpio_register[GPIO_BLOCK(pin_id)];
- u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
-
- switch (value) {
- case GPIO_DATA_HIGH:
- writel(mask, &p_gpio_register->gpio_dats);
- break;
- case GPIO_DATA_LOW:
- writel(mask, &p_gpio_register->gpio_datc);
- break;
- default:
- printf("Invalid value passed in %s", __FUNCTION__);
- return GPIO_INVALID_PARAMETER;
- }
- return GPIO_OK;
-}
-
-int gpio_readpin(int pin_id, enum gpio_data *rv)
-{
- struct gpio_register *p_gpio_register =
- addr_gpio_register[GPIO_BLOCK(pin_id)];
- u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
-
- if ((readl(&p_gpio_register->gpio_dat) & mask) != 0)
- *rv = GPIO_DATA_HIGH;
- else
- *rv = GPIO_DATA_LOW;
- return GPIO_OK;
-}
-
-int gpio_altfuncenable(enum gpio_alt_function altfunc, char *dev_name)
-{
- return (int)gpio_altfunction(altfunc, GPIO_ALTF_FIND, dev_name);
-}
-
-int gpio_altfuncdisable(enum gpio_alt_function altfunc, char *dev_name)
-{
- return (int)gpio_altfunction(altfunc, GPIO_ALTF_DISABLE, dev_name);
-}
diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c
deleted file mode 100644
index 9df499b..0000000
--- a/board/st-ericsson/u8500/u8500_href.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <malloc.h>
-#include <i2c.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/prcmu.h>
-#ifdef CONFIG_MMC
-#include "../../../drivers/mmc/arm_pl180_mmci.h"
-#endif
-
-#define NOMADIK_PER4_BASE (0x80150000)
-#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000)
-#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000)
-
-/* Power, Reset, Clock Management Unit */
-/*
- * SVA: Smart Video Accelerator
- * SIA: Smart Imaging Accelerator
- * SGA: Smart Graphic accelerator
- * B2R2: Graphic blitter
- */
-#define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000)
-#define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004)
-#define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008)
-#define PRCM_SIAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x00C)
-#define PRCM_SAAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x010)
-#define PRCM_SGACLK_MGT_REG (PRCMU_BASE + 0x014)
-#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018)
-#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C)
-#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020)
-#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024)
-#define PRCM_SLIMCLK_MGT_REG (PRCMU_BASE + 0x028)
-#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C)
-#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030)
-#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034)
-#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038)
-#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C)
-#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040)
-#define PRCM_DMACLK_MGT_REG (PRCMU_BASE + 0x074)
-#define PRCM_B2R2CLK_MGT_REG (PRCMU_BASE + 0x078)
-
-#define PRCM_PLLSOC0_FREQ_REG (PRCMU_BASE + 0x080)
-#define PRCM_PLLSOC1_FREQ_REG (PRCMU_BASE + 0x084)
-#define PRCM_PLLARM_FREQ_REG (PRCMU_BASE + 0x088)
-#define PRCM_PLLDDR_FREQ_REG (PRCMU_BASE + 0x08C)
-#define PRCM_ARM_CHGCLKREQ_REG (PRCMU_BASE + 0x114)
-
-#define PRCM_TCR (PRCMU_BASE + 0x1C8)
-
-/*
- * Memory controller register
- */
-#define DMC_BASE_ADDR 0x80156000
-#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184)
-
-int board_id; /* set in board_late_init() */
-
-/* PLLs for clock management registers */
-enum {
- GATED = 0,
- PLLSOC0, /* pllsw = 001, ffs() = 1 */
- PLLSOC1, /* pllsw = 010, ffs() = 2 */
- PLLDDR, /* pllsw = 100, ffs() = 3 */
- PLLARM,
-};
-
-static struct pll_freq_regs {
- int idx; /* index fror pll_name and pll_khz arrays */
- uint32_t addr;
-} pll_freq_regs[] = {
- {PLLSOC0, PRCM_PLLSOC0_FREQ_REG},
- {PLLSOC1, PRCM_PLLSOC1_FREQ_REG},
- {PLLDDR, PRCM_PLLDDR_FREQ_REG},
- {PLLARM, PRCM_PLLARM_FREQ_REG},
- {0, 0},
-};
-
-static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"};
-static uint32_t pll_khz[5]; /* use ffs(pllsw(reg)) as index for 0..3 */
-
-static struct clk_mgt_regs {
- uint32_t addr;
- uint32_t val;
- const char *descr;
-} clk_mgt_regs[] = {
- /* register content taken from bootrom settings */
- {PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */
- {PRCM_ACLK_MGT_REG, 0x0125, "ACLK"}, /* ena, SOC0/5, 160 MHz */
- {PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */
- {PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */
- {PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */
- {PRCM_SGACLK_MGT_REG, 0x0024, "SGA"}, /* dis, SOC0/4, 200 MHz */
- {PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */
- {PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"}, /* dis, GATED, CLK38 */
- {PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"}, /* ena, SOC0/16, 50 MHz */
- {PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */
- {PRCM_PER1CLK_MGT_REG, 0x126, "PER1"}, /* ena, SOC0/6, 133 MHz */
- {PRCM_PER2CLK_MGT_REG, 0x126, "PER2"}, /* ena, SOC0/6, 133 MHz */
- {PRCM_PER3CLK_MGT_REG, 0x126, "PER3"}, /* ena, SOC0/6, 133 MHz */
- {PRCM_PER5CLK_MGT_REG, 0x126, "PER5"}, /* ena, SOC0/6, 133 MHz */
- {PRCM_PER6CLK_MGT_REG, 0x126, "PER6"}, /* ena, SOC0/6, 133 MHz */
- {PRCM_PER7CLK_MGT_REG, 0x128, "PER7"}, /* ena, SOC0/8, 100 MHz */
- {PRCM_DMACLK_MGT_REG, 0x125, "DMA"}, /* ena, SOC0/5, 160 MHz */
- {PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"}, /* dis, SOC0/5, 160 MHz */
- {0, 0, NULL},
-};
-
-static void init_regs(void);
-
-DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
- printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f(void)
-{
- init_regs();
- return 0;
-}
-
-int board_init(void)
-{
- uint32_t unused_cols_rows;
- unsigned int nrows;
- unsigned int ncols;
-
- gd->bd->bi_arch_number = 0x1A4;
- gd->bd->bi_boot_params = 0x00000100;
- gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-
- /*
- * Assumption: 2 CS active, both CS have same layout.
- * 15 rows max, 11 cols max (controller spec).
- * memory chip has 8 banks, I/O width 32 bit.
- * The correct way would be to read MR#8: I/O width and density,
- * but this requires locking against the PRCMU firmware.
- * Simplified approach:
- * Read number of unused rows and columns from mem controller.
- * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes
- */
- unused_cols_rows = readl(DMC_CTL_97);
- nrows = 15 - (unused_cols_rows & 0x07);
- ncols = 11 - ((unused_cols_rows & 0x0700) >> 8);
- gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4;
-
- icache_enable();
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = PHYS_SDRAM_SIZE_1;
-
- return 0;
-}
-
-unsigned int addr_vall_arr[] = {
- 0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */
- 0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */
- 0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
- 0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
- 0x80157020, 0x00000150, /* I2C 48MHz clock */
- 0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
- 0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
- 0xA03DF000, 0x0000000D, /* Clock for MTU Timers */
- 0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */
- 0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
- 0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
- 0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */
- 0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */
- 0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */
- 0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */
- 0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */
- 0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */
- 0x801571E4, 0x0000000C, /* PRCMU settings for B2R2,
- PRCM_APE_RESETN_SET_REG */
- 0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */
- 0xA03FF000, 0x00000003, /* USB */
- 0xA03FF008, 0x00000001, /* USB */
- 0xA03FE00C, 0x00000000, /* USB */
- 0xA03FE020, 0x00000FFF, /* USB */
- 0xA03FE024, 0x00000000 /* USB */
-};
-
-#ifdef CONFIG_BOARD_LATE_INIT
-/*
- * called after all initialisation were done, but before the generic
- * mmc_initialize().
- */
-int board_late_init(void)
-{
- uchar byte;
-
- /*
- * Determine and set board_id environment variable
- * 0: mop500, 1: href500
- * Above boards have different GPIO expander chips which we can
- * distinguish by the chip id.
- *
- * The board_id environment variable is needed for the Linux bootargs.
- */
- (void) i2c_set_bus_num(0);
- (void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1);
- if (byte == 0x01) {
- board_id = 0;
- setenv("board_id", "0");
- } else {
- board_id = 1;
- setenv("board_id", "1");
- }
-#ifdef CONFIG_MMC
- u8500_mmc_power_init();
-
- /*
- * config extended GPIO pins for level shifter and
- * SDMMC_ENABLE
- */
- if (board_id == 0) {
- /* MOP500 */
- byte = 0x0c;
- (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1);
- (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1);
- } else {
- /* HREF */
- /* set the direction of GPIO KPY9 and KPY10 */
- byte = 0x06;
- (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1);
- /* must be a multibyte access */
- (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1,
- (uchar []) {0x06, 0x06}, 2);
- }
-#endif /* CONFIG_MMC */
- /*
- * Create a memargs variable which points uses either the memargs256 or
- * memargs512 environment variable, depending on the memory size.
- * memargs is used to build the bootargs, memargs256 and memargs512 are
- * stored in the environment.
- */
- if (gd->bd->bi_dram[0].size == 0x10000000) {
- setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}");
- setenv("mem", "256M");
- } else {
- setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}");
- setenv("mem", "512M");
- }
-
- return 0;
-}
-#endif /* CONFIG_BOARD_LATE_INIT */
-
-static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits)
-{
- writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats);
- writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis);
-}
-
-static void init_regs(void)
-{
- /* FIXME Remove magic register array settings for ED also */
- struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE;
-
- /* Enable timers */
- writel(1 << 17, &prcmu->tcr);
-
- u8500_prcmu_enable(&prcmu->per1clk_mgt);
- u8500_prcmu_enable(&prcmu->per2clk_mgt);
- u8500_prcmu_enable(&prcmu->per3clk_mgt);
- u8500_prcmu_enable(&prcmu->per5clk_mgt);
- u8500_prcmu_enable(&prcmu->per6clk_mgt);
- u8500_prcmu_enable(&prcmu->per7clk_mgt);
-
- u8500_prcmu_enable(&prcmu->uartclk_mgt);
- u8500_prcmu_enable(&prcmu->i2cclk_mgt);
-
- u8500_prcmu_enable(&prcmu->sdmmcclk_mgt);
-
- u8500_clock_enable(1, 9, -1); /* GPIO0 */
-
- u8500_clock_enable(2, 11, -1); /* GPIO1 */
-
- u8500_clock_enable(3, 8, -1); /* GPIO2 */
- u8500_clock_enable(5, 1, -1); /* GPIO3 */
-
- u8500_clock_enable(3, 6, 6); /* UART2 */
-
- gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0");
- u8500_clock_enable(3, 3, 3); /* I2C0 */
-
- early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000);
- gpio_altfuncenable(GPIO_ALT_UART_2, "UART2");
-
- early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0);
- gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC");
-
- early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0);
- gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD");
-
- u8500_clock_enable(1, 5, 5); /* SDI0 */
- u8500_clock_enable(2, 4, 2); /* SDI4 */
-
- u8500_clock_enable(6, 7, -1); /* MTU0 */
- u8500_clock_enable(3, 4, 4); /* SDI2 */
-
- early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff);
- gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC");
-
- /*
- * Enabling clocks for all devices which are AMBA devices in the
- * kernel. Otherwise they will not get probe()'d because the
- * peripheral ID register will not be powered.
- */
-
- /* XXX: some of these differ between ED/V1 */
-
- u8500_clock_enable(1, 1, 1); /* UART1 */
- u8500_clock_enable(1, 0, 0); /* UART0 */
-
- u8500_clock_enable(3, 2, 2); /* SSP1 */
- u8500_clock_enable(3, 1, 1); /* SSP0 */
-
- u8500_clock_enable(2, 8, -1); /* SPI0 */
- u8500_clock_enable(2, 5, 3); /* MSP2 */
-}
-
-#ifdef CONFIG_MMC
-static int u8500_mmci_board_init(void)
-{
- enum gpio_error error;
- struct gpio_register *gpio_base_address;
-
- gpio_base_address = (void *)(U8500_GPIO_0_BASE);
- gpio_base_address->gpio_dats |= 0xFFC0000;
- gpio_base_address->gpio_pdis &= ~0xFFC0000;
-
- /* save the GPIO0 AFSELA register */
- error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC");
- if (error != GPIO_OK) {
- printf("u8500_mmci_board_init() gpio_altfuncenable failed\n");
- return -ENODEV;
- }
- return 0;
-}
-
-int board_mmc_init(bd_t *bd)
-{
- struct pl180_mmc_host *host;
-
- if (u8500_mmci_board_init())
- return -ENODEV;
-
- host = malloc(sizeof(struct pl180_mmc_host));
- if (!host)
- return -ENOMEM;
- memset(host, 0, sizeof(*host));
-
- strcpy(host->name, "MMC");
- host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
- host->pwr_init = INIT_PWR;
- host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN;
- host->voltages = VOLTAGE_WINDOW_MMC;
- host->caps = 0;
- host->clock_in = ARM_MCLK;
- host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
- host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
-
- return arm_pl180_mmci_init(host);
-}
-#endif
-
-
-/*
- * get_pll_freq_khz - return PLL frequency in kHz
- */
-static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg)
-{
- uint32_t idf, ldf, odf, seldiv, phi;
-
- /*
- * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0
- * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1
- * where:
- * IDF=R(2:0) (when R=000, IDF=1d)
- * LDF = 2*D(7:0) (D must be greater than or equal to 6)
- * ODF = N(5:0) (when N=000000, 0DF=1d)
- */
-
- idf = (freq_reg & 0x70000) >> 16;
- ldf = (freq_reg & 0xff) * 2;
- odf = (freq_reg & 0x3f00) >> 8;
- seldiv = (freq_reg & 0x01000000) >> 24;
- phi = (inclk_khz * ldf) / (2 * odf * idf);
- if (seldiv)
- phi = phi/2;
-
- return phi;
-}
-
-int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- uint32_t inclk_khz;
- uint32_t reg, phi;
- uint32_t clk_khz;
- unsigned int clk_sel;
- struct clk_mgt_regs *clks = clk_mgt_regs;
- struct pll_freq_regs *plls = pll_freq_regs;
-
- /*
- * Go through list of PLLs.
- * Initialise pll out frequency array (pll_khz) and print frequency.
- */
- inclk_khz = 38400; /* 38.4 MHz */
- while (plls->addr) {
- reg = readl(plls->addr);
- phi = get_pll_freq_khz(inclk_khz, reg);
- pll_khz[plls->idx] = phi;
- printf("%s PLL out frequency: %d.%d Mhz\n",
- pll_name[plls->idx], phi/1000, phi % 1000);
- plls++;
- }
-
- /* check ARM clock source */
- reg = readl(PRCM_ARM_CHGCLKREQ_REG);
- printf("A9 running on %s\n",
- (reg & 1) ? "external clock" : "ARM PLL");
-
- /* go through list of clk_mgt_reg */
- printf("\n%19s %9s %7s %9s enabled\n",
- "name(addr)", "value", "PLL", "CLK[MHz]");
- while (clks->addr) {
- reg = readl(clks->addr);
-
- /* convert bit position into array index */
- clk_sel = ffs((reg >> 5) & 0x7); /* PLLSW[2:0] */
-
- if (reg & 0x200)
- clk_khz = 38400; /* CLK38 is set */
- else if ((reg & 0x1f) == 0)
- /* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */
- clk_khz = 0;
- else
- clk_khz = pll_khz[clk_sel] / (reg & 0x1f);
-
- printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n",
- clks->descr, clks->addr, reg, pll_name[clk_sel],
- clk_khz / 1000, clk_khz % 1000,
- (reg & 0x100) ? "ena" : "dis");
- clks++;
- }
-
- return 0;
-}
-
-U_BOOT_CMD(
- clkinfo, 1, 1, do_clkinfo,
- "print clock info",
- ""
-);
diff --git a/configs/snowball_defconfig b/configs/snowball_defconfig
deleted file mode 100644
index e73bc48..0000000
--- a/configs/snowball_defconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_SNOWBALL=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_PROMPT="U8500 $ "
diff --git a/configs/u8500_href_defconfig b/configs/u8500_href_defconfig
deleted file mode 100644
index 0aebc78..0000000
--- a/configs/u8500_href_defconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_U8500_HREF=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_PROMPT="U8500 $ "
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
deleted file mode 100644
index de03e76..0000000
--- a/include/configs/snowball.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * #define DEBUG 1
- */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SNOWBALL
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOARD_LATE_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_U8500
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000
-#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
-
-/*-----------------------------------------------------------------------
- * Size of environment and malloc() pool
- */
-/*
- * If you use U-Boot as crash kernel, make sure that it does not overwrite
- * information saved by kexec during panic. Kexec expects the start
- * address of the executable 32K above "crashkernel" address.
- */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (8*1024)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
-
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_CMD_ENV
-#define CONFIG_ENV_OFFSET 0x0118000
-#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */
-
-/*
- * PL011 Configuration
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_SERIAL_RLCR
-#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
-
-/*
- * U8500 UART registers base for 3 serial devices
- */
-#define CFG_UART0_BASE 0x80120000
-#define CFG_UART1_BASE 0x80121000
-#define CFG_UART2_BASE 0x80007000
-#define CFG_SERIAL0 CFG_UART0_BASE
-#define CFG_SERIAL1 CFG_UART1_BASE
-#define CFG_SERIAL2 CFG_UART2_BASE
-#define CONFIG_PL011_CLOCK 38400000
-#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
- (void *)CFG_SERIAL2 }
-#define CONFIG_CONS_INDEX 2
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Devices and file systems
- */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-/*
- * Commands
- */
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-#ifndef CONFIG_BOOTDELAY
-#define CONFIG_BOOTDELAY 1
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
-"mmc dev 1; " \
- "if run loadbootscript; " \
- "then run bootscript; " \
- "else " \
- "if run mmcload; " \
- "then run mmcboot; " \
- "else " \
- "mmc dev 0; " \
- "if run emmcloadbootscript; " \
- "then run bootscript; " \
- "else " \
- "if run emmcload; " \
- "then run emmcboot; " \
- "else " \
- "echo No media to boot from; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi; "
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr=0x00100000\0" \
- "console=ttyAMA2,115200n8\0" \
- "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \
- "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript " \
- "from mmc ...; source ${loadaddr}\0" \
- "memargs256=mem=96M at 0 mem_modem=32M at 96M mem=32M at 128M " \
- "hwmem=22M at 160M pmem_hwb=42M at 182M mem_mali=32 at 224M\0" \
- "memargs512=mem=96M at 0 mem_modem=32M at 96M hwmem=32M at 128M " \
- "mem=64M at 160M mem_mali=32M at 224M " \
- "pmem_hwb=128M at 256M mem=128M at 384M\0" \
- "memargs1024=mem=128M at 0 mali.mali_mem=32M at 128M " \
- "hwmem=168M at M160M mem=48M at 328M " \
- "mem_issw=1M at 383M mem=640M at 384M\0" \
- "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \
- "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \
- "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \
- "commonargs=setenv bootargs console=${console} " \
- "vmalloc=300M\0" \
- "emmcargs=setenv bootargs ${bootargs} " \
- "root=/dev/mmcblk0p3 " \
- "rootwait\0" \
- "addcons=setenv bootargs ${bootargs} " \
- "console=${console}\0" \
- "emmcboot=echo Booting from eMMC ...; " \
- "run commonargs emmcargs memargs; " \
- "bootm ${loadaddr}\0" \
- "mmcargs=setenv bootargs ${bootargs} " \
- "root=/dev/mmcblk1p2 " \
- "rootwait earlyprintk\0" \
- "mmcboot=echo Booting from external MMC ...; " \
- "run commonargs mmcargs memargs; " \
- "bootm ${loadaddr}\0" \
- "fdt_high=0x2BC00000\0" \
- "stdout=serial,usbtty\0" \
- "stdin=serial,usbtty\0" \
- "stderr=serial,usbtty\0"
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
- + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
-
-#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SETUP_MEMORY_TAGS 2
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */
-
-/*
- * additions for new relocation code
- */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-
-/* landing address before relocation */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0x0
-#endif
-
-/*
- * MMC related configs
- */
-#define CONFIG_ARM_PL180_MMCI
-#define MMC_BLOCK_SIZE 512
-#define CFG_EMMC_BASE 0x80114000
-#define CFG_MMC_BASE 0x80126000
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * base register values for U8500
- */
-#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */
-
-
-/*
- * U8500 GPIO register base for 9 banks
- */
-#define CONFIG_DB8500_GPIO
-#define CFG_GPIO_0_BASE 0x8012E000
-#define CFG_GPIO_1_BASE 0x8012E080
-#define CFG_GPIO_2_BASE 0x8000E000
-#define CFG_GPIO_3_BASE 0x8000E080
-#define CFG_GPIO_4_BASE 0x8000E100
-#define CFG_GPIO_5_BASE 0x8000E180
-#define CFG_GPIO_6_BASE 0x8011E000
-#define CFG_GPIO_7_BASE 0x8011E080
-#define CFG_GPIO_8_BASE 0xA03FE000
-
-#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
deleted file mode 100644
index a8cc030..0000000
--- a/include/configs/u8500_href.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_U8500
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000
-#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-/*
- * Size of malloc() pool
- */
-#ifdef CONFIG_BOOT_SRAM
-#define CONFIG_ENV_SIZE (32*1024)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64*1024)
-#else
-#define CONFIG_ENV_SIZE (128*1024)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
-#endif
-
-/*
- * PL011 Configuration
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_SERIAL_RLCR
-#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
-
-/*
- * U8500 UART registers base for 3 serial devices
- */
-#define CFG_UART0_BASE 0x80120000
-#define CFG_UART1_BASE 0x80121000
-#define CFG_UART2_BASE 0x80007000
-#define CFG_SERIAL0 CFG_UART0_BASE
-#define CFG_SERIAL1 CFG_UART1_BASE
-#define CFG_SERIAL2 CFG_UART2_BASE
-#define CONFIG_PL011_CLOCK 38400000
-#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
- (void *)CFG_SERIAL2 }
-#define CONFIG_CONS_INDEX 2
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Devices and file systems
- */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-/*
- * Commands
- */
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_I2C
-
-#ifndef CONFIG_BOOTDELAY
-#define CONFIG_BOOTDELAY 1
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND "run emmcboot"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr=0x00100000\0" \
- "console=ttyAMA2,115200n8\0" \
- "memargs256=mem=96M at 0 mem_modem=32M at 96M mem=30M at 128M " \
- "pmem=22M at 158M pmem_hwb=44M at 180M mem_mali=32 at 224M\0" \
- "memargs512=mem=96M at 0 mem_modem=32M at 96M mem=44M at 128M " \
- "pmem=22M at 172M mem=30M at 194M mem_mali=32M at 224M " \
- "pmem_hwb=54M at 256M mem=202M at 310M\0" \
- "commonargs=setenv bootargs cachepolicy=writealloc noinitrd " \
- "init=init " \
- "board_id=${board_id} " \
- "logo.${logo} " \
- "startup_graphics=${startup_graphics}\0" \
- "emmcargs=setenv bootargs ${bootargs} " \
- "root=/dev/mmcblk0p2 " \
- "rootdelay=1\0" \
- "addcons=setenv bootargs ${bootargs} " \
- "console=${console}\0" \
- "emmcboot=echo Booting from eMMC ...; " \
- "run commonargs emmcargs addcons memargs;" \
- "mmc read 0 ${loadaddr} 0xA0000 0x4000;" \
- "bootm ${loadaddr}\0" \
- "flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;" \
- "source ${loadaddr}\0" \
- "loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0" \
- "usbtty=cdc_acm\0" \
- "stdout=serial,usbtty\0" \
- "stdin=serial,usbtty\0" \
- "stderr=serial,usbtty\0"
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
- + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SETUP_MEMORY_TAGS 2
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-
-/*
- * I2C
- */
-#define CONFIG_U8500_I2C
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0 /* slave addr of controller */
-#define CONFIG_SYS_U8500_I2C0_BASE 0x80004000
-#define CONFIG_SYS_U8500_I2C1_BASE 0x80122000
-#define CONFIG_SYS_U8500_I2C2_BASE 0x80128000
-#define CONFIG_SYS_U8500_I2C3_BASE 0x80110000
-#define CONFIG_SYS_U8500_I2C_BUS_MAX 4
-
-#define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */
-#define CONFIG_TC35892_GPIO
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */
-#define PHYS_SDRAM_SIZE_1 0x20000000 /* 512 MB */
-
-/*
- * additions for new relocation code
- */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-
-/* landing address before relocation */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0x0
-#endif
-
-/*
- * MMC related configs
- * NB Only externa SD slot is currently supported
- */
-#define MMC_BLOCK_SIZE 512
-#define CONFIG_ARM_PL180_MMCI
-#define CONFIG_ARM_PL180_MMCI_BASE 0x80126000 /* MMC base for 8500 */
-#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
-#define CONFIG_MMC_DEV_NUM 1
-
-#define CONFIG_CMD_ENV
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET 0x13F80000
-#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * base register values for U8500
- */
-#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock
- management unit */
-#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */
-
-#endif /* __CONFIG_H */
--
2.5.0.457.gab17608
More information about the U-Boot
mailing list