[U-Boot] [PATCH 13/13] arm: zynq: Move serial driver to driver model
Simon Glass
sjg at chromium.org
Sat Aug 29 17:10:22 CEST 2015
Update this driver to use driver model and change all users.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/Kconfig | 1 +
drivers/serial/serial_zynq.c | 162 ++++++++++++++++------------------------
include/configs/zynq_microzed.h | 1 -
include/configs/zynq_picozed.h | 1 -
include/configs/zynq_zc70x.h | 1 -
include/configs/zynq_zc770.h | 6 --
include/configs/zynq_zed.h | 1 -
include/configs/zynq_zybo.h | 1 -
8 files changed, 65 insertions(+), 109 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a82306e..7705e03 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -687,6 +687,7 @@ config ARCH_ZYNQ
select DM
select SPL_DM
select DM_SPI
+ select DM_SERIAL
select DM_SPI_FLASH
select SPL_SEPARATE_BSS
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index c39c1a9..7069afe 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -6,6 +6,8 @@
*/
#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <watchdog.h>
@@ -18,6 +20,7 @@
DECLARE_GLOBAL_DATA_PTR;
#define ZYNQ_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
+#define ZYNQ_UART_SR_TXACTIVE (1 << 11) /* TX active */
#define ZYNQ_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
#define ZYNQ_UART_CR_TX_EN 0x00000010 /* TX enabled */
@@ -38,9 +41,8 @@ struct uart_zynq {
u32 baud_rate_divider; /* 0x34 - Baud Rate Divider [7:0] */
};
-static struct uart_zynq *uart_zynq_ports[2] = {
- [0] = (struct uart_zynq *)ZYNQ_SERIAL_BASEADDR0,
- [1] = (struct uart_zynq *)ZYNQ_SERIAL_BASEADDR1,
+struct zynq_uart_priv {
+ struct uart_zynq *regs;
};
/* Set up the baud rate in gd struct */
@@ -84,15 +86,6 @@ static void _uart_zynq_serial_setbrg(struct uart_zynq *regs,
writel(bgen, ®s->baud_rate_gen);
}
-/* Set up the baud rate in gd struct */
-static void uart_zynq_serial_setbrg(const int port)
-{
- unsigned long clock = get_uart_clk(port);
- struct uart_zynq *regs = uart_zynq_ports[port];
-
- return _uart_zynq_serial_setbrg(regs, clock, gd->baudrate);
-}
-
/* Initialize the UART, with...some settings. */
static void _uart_zynq_serial_init(struct uart_zynq *regs)
{
@@ -102,20 +95,6 @@ static void _uart_zynq_serial_init(struct uart_zynq *regs)
writel(ZYNQ_UART_MR_PARITY_NONE, ®s->mode); /* 8 bit, no parity */
}
-/* Initialize the UART, with...some settings. */
-static int uart_zynq_serial_init(const int port)
-{
- struct uart_zynq *regs = uart_zynq_ports[port];
-
- if (!regs)
- return -1;
-
- _uart_zynq_serial_init(regs);
- uart_zynq_serial_setbrg(port);
-
- return 0;
-}
-
static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c)
{
if (readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL)
@@ -126,103 +105,90 @@ static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c)
return 0;
}
-static void uart_zynq_serial_putc(const char c, const int port)
+int zynq_serial_setbrg(struct udevice *dev, int baudrate)
{
- struct uart_zynq *regs = uart_zynq_ports[port];
+ struct zynq_uart_priv *priv = dev_get_priv(dev);
+ unsigned long clock = get_uart_clk(0);
- while (_uart_zynq_serial_putc(regs, c) == -EAGAIN)
- WATCHDOG_RESET();
+ _uart_zynq_serial_setbrg(priv->regs, clock, baudrate);
- if (c == '\n') {
- while (_uart_zynq_serial_putc(regs, '\r') == -EAGAIN)
- WATCHDOG_RESET();
- }
+ return 0;
}
-static void uart_zynq_serial_puts(const char *s, const int port)
+static int zynq_serial_probe(struct udevice *dev)
{
- while (*s)
- uart_zynq_serial_putc(*s++, port);
-}
+ struct zynq_uart_priv *priv = dev_get_priv(dev);
-static int uart_zynq_serial_tstc(const int port)
-{
- struct uart_zynq *regs = uart_zynq_ports[port];
+ _uart_zynq_serial_init(priv->regs);
- return (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY) == 0;
+ return 0;
}
-static int uart_zynq_serial_getc(const int port)
+static int zynq_serial_getc(struct udevice *dev)
{
- struct uart_zynq *regs = uart_zynq_ports[port];
+ struct zynq_uart_priv *priv = dev_get_priv(dev);
+ struct uart_zynq *regs = priv->regs;
+
+ if (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY)
+ return -EAGAIN;
- while (!uart_zynq_serial_tstc(port))
- WATCHDOG_RESET();
return readl(®s->tx_rx_fifo);
}
-/* Multi serial device functions */
-#define DECLARE_PSSERIAL_FUNCTIONS(port) \
- static int uart_zynq##port##_init(void) \
- { return uart_zynq_serial_init(port); } \
- static void uart_zynq##port##_setbrg(void) \
- { return uart_zynq_serial_setbrg(port); } \
- static int uart_zynq##port##_getc(void) \
- { return uart_zynq_serial_getc(port); } \
- static int uart_zynq##port##_tstc(void) \
- { return uart_zynq_serial_tstc(port); } \
- static void uart_zynq##port##_putc(const char c) \
- { uart_zynq_serial_putc(c, port); } \
- static void uart_zynq##port##_puts(const char *s) \
- { uart_zynq_serial_puts(s, port); }
-
-/* Serial device descriptor */
-#define INIT_PSSERIAL_STRUCTURE(port, __name) { \
- .name = __name, \
- .start = uart_zynq##port##_init, \
- .stop = NULL, \
- .setbrg = uart_zynq##port##_setbrg, \
- .getc = uart_zynq##port##_getc, \
- .tstc = uart_zynq##port##_tstc, \
- .putc = uart_zynq##port##_putc, \
- .puts = uart_zynq##port##_puts, \
-}
+static int zynq_serial_putc(struct udevice *dev, const char ch)
+{
+ struct zynq_uart_priv *priv = dev_get_priv(dev);
-DECLARE_PSSERIAL_FUNCTIONS(0);
-static struct serial_device uart_zynq_serial0_device =
- INIT_PSSERIAL_STRUCTURE(0, "ttyPS0");
-DECLARE_PSSERIAL_FUNCTIONS(1);
-static struct serial_device uart_zynq_serial1_device =
- INIT_PSSERIAL_STRUCTURE(1, "ttyPS1");
+ return _uart_zynq_serial_putc(priv->regs, ch);
+}
-__weak struct serial_device *default_serial_console(void)
+static int zynq_serial_pending(struct udevice *dev, bool input)
{
- const void *blob = gd->fdt_blob;
- int node;
- unsigned int base_addr;
+ struct zynq_uart_priv *priv = dev_get_priv(dev);
+ struct uart_zynq *regs = priv->regs;
- node = fdt_path_offset(blob, "serial0");
- if (node < 0)
- return NULL;
+ if (input)
+ return !(readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY);
+ else
+ return !!(readl(®s->channel_sts) & ZYNQ_UART_SR_TXACTIVE);
+}
- base_addr = fdtdec_get_addr(blob, node, "reg");
- if (base_addr == FDT_ADDR_T_NONE)
- return NULL;
+static int zynq_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct zynq_uart_priv *priv = dev_get_priv(dev);
+ fdt_addr_t addr;
- if (base_addr == ZYNQ_SERIAL_BASEADDR0)
- return &uart_zynq_serial0_device;
+ addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
- if (base_addr == ZYNQ_SERIAL_BASEADDR1)
- return &uart_zynq_serial1_device;
+ priv->regs = (struct uart_zynq *)addr;
- return NULL;
+ return 0;
}
-void zynq_serial_initialize(void)
-{
- serial_register(&uart_zynq_serial0_device);
- serial_register(&uart_zynq_serial1_device);
-}
+static const struct dm_serial_ops zynq_serial_ops = {
+ .putc = zynq_serial_putc,
+ .pending = zynq_serial_pending,
+ .getc = zynq_serial_getc,
+ .setbrg = zynq_serial_setbrg,
+};
+
+static const struct udevice_id zynq_serial_ids[] = {
+ { .compatible = "xlnx,xuartps" },
+ { }
+};
+
+U_BOOT_DRIVER(serial_s5p) = {
+ .name = "serial_zynq",
+ .id = UCLASS_SERIAL,
+ .of_match = zynq_serial_ids,
+ .ofdata_to_platdata = zynq_serial_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct zynq_uart_priv),
+ .probe = zynq_serial_probe,
+ .ops = &zynq_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
#ifdef CONFIG_DEBUG_UART_ZYNQ
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
index 549a664..b5ffafb 100644
--- a/include/configs/zynq_microzed.h
+++ b/include/configs/zynq_microzed.h
@@ -12,7 +12,6 @@
#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
-#define CONFIG_ZYNQ_SERIAL_UART1
#define CONFIG_ZYNQ_GEM0
#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
diff --git a/include/configs/zynq_picozed.h b/include/configs/zynq_picozed.h
index d116e05..ffc73bd 100644
--- a/include/configs/zynq_picozed.h
+++ b/include/configs/zynq_picozed.h
@@ -12,7 +12,6 @@
#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
-#define CONFIG_ZYNQ_SERIAL_UART1
#define CONFIG_ZYNQ_GEM0
#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index b659054..468a6bc 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -12,7 +12,6 @@
#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
-#define CONFIG_ZYNQ_SERIAL_UART1
#define CONFIG_ZYNQ_GEM0
#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
index 7a1b872..63224dd 100644
--- a/include/configs/zynq_zc770.h
+++ b/include/configs/zynq_zc770.h
@@ -15,26 +15,20 @@
#define CONFIG_SYS_NO_FLASH
#if defined(CONFIG_ZC770_XM010)
-# define CONFIG_ZYNQ_SERIAL_UART1
# define CONFIG_ZYNQ_GEM0
# define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
# define CONFIG_ZYNQ_SDHCI0
# define CONFIG_ZYNQ_SPI
#elif defined(CONFIG_ZC770_XM011)
-# define CONFIG_ZYNQ_SERIAL_UART1
#elif defined(CONFIG_ZC770_XM012)
-# define CONFIG_ZYNQ_SERIAL_UART1
# undef CONFIG_SYS_NO_FLASH
#elif defined(CONFIG_ZC770_XM013)
-# define CONFIG_ZYNQ_SERIAL_UART0
# define CONFIG_ZYNQ_GEM1
# define CONFIG_ZYNQ_GEM_PHY_ADDR1 7
-#else
-# define CONFIG_ZYNQ_SERIAL_UART0
#endif
#include <configs/zynq-common.h>
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
index 946de95..6ec6117 100644
--- a/include/configs/zynq_zed.h
+++ b/include/configs/zynq_zed.h
@@ -12,7 +12,6 @@
#define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024)
-#define CONFIG_ZYNQ_SERIAL_UART1
#define CONFIG_ZYNQ_GEM0
#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h
index 191f2a5..e2270cd 100644
--- a/include/configs/zynq_zybo.h
+++ b/include/configs/zynq_zybo.h
@@ -13,7 +13,6 @@
#define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024)
-#define CONFIG_ZYNQ_SERIAL_UART1
#define CONFIG_ZYNQ_GEM0
#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
--
2.5.0.457.gab17608
More information about the U-Boot
mailing list