[U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction
Tom Rini
trini at konsulko.com
Tue Aug 25 18:06:05 CEST 2015
On Tue, Aug 25, 2015 at 05:40:53PM +0200, Paul Kocialkowski wrote:
> The SYS_BOOT-based fallback shouldn't only check for one of the conditions of
> use and then let the switch/case handle each boot device without enforcing the
> conditions for each type of boot device again.
>
> For instance, this behaviour would trigger the fallback for UART when
> BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should
> be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not
> CONFIG_SPL_USB_SUPPORT.
> Separating the logic for USB and UART is a first step to solve this.
>
> In addition, a similar problematic behaviour took place when BOOT_DEVICE_USBETH,
> BOOT_DEVICE_USB and CONFIG_SPL_USBETH_SUPPORT were enabled and not
> CONFIG_SPL_USB_SUPPORT.
>
> Since BOOT_DEVICE_USBETH is only a problem when it's defined to the same value
> as BOOT_DEVICE_USB, we can check that BOOT_DEVICE_USBETH and BOOT_DEVICE_USB are
> different and if not, that CONFIG_SPL_USBETH_SUPPORT is not enabled to enable
> the SYS_BOOT-based fallback mechanism.
>
> Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
Reviewed-by: Tom Rini <trini at konsulko.com>
But I'm going to wait until Hannes can report back with a Tested-by too,
thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150825/12ee2e2a/attachment.sig>
More information about the U-Boot
mailing list