[U-Boot] [PATCH 21/45] arm: Remove omap3_logic board

Simon Glass sjg at chromium.org
Mon Aug 31 03:19:15 CEST 2015


This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/cpu/armv7/omap3/Kconfig    |   4 -
 board/logicpd/omap3som/Kconfig      |  12 --
 board/logicpd/omap3som/MAINTAINERS  |   6 -
 board/logicpd/omap3som/Makefile     |   8 -
 board/logicpd/omap3som/omap3logic.c | 242 ---------------------------
 board/logicpd/omap3som/omap3logic.h |  31 ----
 configs/omap3_logic_defconfig       |   8 -
 include/configs/omap3_logic.h       | 322 ------------------------------------
 8 files changed, 633 deletions(-)
 delete mode 100644 board/logicpd/omap3som/Kconfig
 delete mode 100644 board/logicpd/omap3som/MAINTAINERS
 delete mode 100644 board/logicpd/omap3som/Makefile
 delete mode 100644 board/logicpd/omap3som/omap3logic.c
 delete mode 100644 board/logicpd/omap3som/omap3logic.h
 delete mode 100644 configs/omap3_logic_defconfig
 delete mode 100644 include/configs/omap3_logic.h

diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index 336da53..9665c95 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -87,9 +87,6 @@ config TARGET_MCX
 	bool "MCX"
 	select SUPPORT_SPL
 
-config TARGET_OMAP3_LOGIC
-	bool "OMAP3 Logic"
-
 config TARGET_OMAP3_MVBLX
 	bool "OMAP3 MVBLX"
 
@@ -139,7 +136,6 @@ source "board/pandora/Kconfig"
 source "board/8dtech/eco5pk/Kconfig"
 source "board/corscience/tricorder/Kconfig"
 source "board/htkw/mcx/Kconfig"
-source "board/logicpd/omap3som/Kconfig"
 source "board/matrix_vision/mvblx/Kconfig"
 source "board/nokia/rx51/Kconfig"
 source "board/technexion/tao3530/Kconfig"
diff --git a/board/logicpd/omap3som/Kconfig b/board/logicpd/omap3som/Kconfig
deleted file mode 100644
index 03d272a..0000000
--- a/board/logicpd/omap3som/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP3_LOGIC
-
-config SYS_BOARD
-	default "omap3som"
-
-config SYS_VENDOR
-	default "logicpd"
-
-config SYS_CONFIG_NAME
-	default "omap3_logic"
-
-endif
diff --git a/board/logicpd/omap3som/MAINTAINERS b/board/logicpd/omap3som/MAINTAINERS
deleted file mode 100644
index ffe2201..0000000
--- a/board/logicpd/omap3som/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-OMAP3SOM BOARD
-M:	Peter Barada <peter.barada at logicpd.com>
-S:	Maintained
-F:	board/logicpd/omap3som/
-F:	include/configs/omap3_logic.h
-F:	configs/omap3_logic_defconfig
diff --git a/board/logicpd/omap3som/Makefile b/board/logicpd/omap3som/Makefile
deleted file mode 100644
index 87b86ad..0000000
--- a/board/logicpd/omap3som/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= omap3logic.o
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
deleted file mode 100644
index 609edf1..0000000
--- a/board/logicpd/omap3som/omap3logic.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * (C) Copyright 2011
- * Logic Product Development <www.logicpd.com>
- *
- * Author :
- *	Peter Barada <peter.barada at logicpd.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Richard Woodruff <r-woodruff2 at ti.com>
- *	Syed Mohammed Khasim <khasim at ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <netdev.h>
-#include <flash.h>
-#include <nand.h>
-#include <i2c.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include "omap3logic.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * two dimensional array of strucures containining board name and Linux
- * machine IDs; row it selected based on CPU column is slected based
- * on hsusb0_data5 pin having a pulldown resistor
- */
-static struct board_id {
-	char *name;
-	int machine_id;
-} boards[2][2] = {
-	{
-		{
-			.name		= "OMAP35xx SOM LV",
-			.machine_id	= MACH_TYPE_OMAP3530_LV_SOM,
-		},
-		{
-			.name		= "OMAP35xx Torpedo",
-			.machine_id	= MACH_TYPE_OMAP3_TORPEDO,
-		},
-	},
-	{
-		{
-			.name		= "DM37xx SOM LV",
-			.machine_id	= MACH_TYPE_DM3730_SOM_LV,
-		},
-		{
-			.name		= "DM37xx Torpedo",
-			.machine_id	= MACH_TYPE_DM3730_TORPEDO,
-		},
-	},
-};
-
-/*
- * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
- */
-#define BOARD_ID_GPIO	189 /* hsusb0_data5 pin */
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	struct board_id *board;
-	unsigned int val;
-
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	/*
-	 * To identify between a SOM LV and Torpedo module,
-	 * a pulldown resistor is on hsusb0_data5 for the SOM LV module.
-	 * Drive the pin (and let it soak), then read it back.
-	 * If the pin is still high its a Torpedo.  If low its a SOM LV
-	 */
-
-	/* Mux hsusb0_data5 as a GPIO */
-	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M4));
-
-	if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {
-
-		/*
-		 * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV
-		 * will drain the voltage.
-		 */
-		gpio_direction_output(BOARD_ID_GPIO, 0);
-		gpio_set_value(BOARD_ID_GPIO, 1);
-
-		/* Let it soak for a bit */
-		sdelay(0x100);
-
-		/*
-		 * Read state of BOARD_ID_GPIO as an input and if its set.
-		 * If so the board is a Torpedo
-		 */
-		gpio_direction_input(BOARD_ID_GPIO);
-		val = gpio_get_value(BOARD_ID_GPIO);
-		gpio_free(BOARD_ID_GPIO);
-
-		board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val];
-		printf("Board: %s\n", board->name);
-
-		/* Set the machine_id passed to Linux */
-		gd->bd->bi_arch_number = board->machine_id;
-	}
-
-	/* restore hsusb0_data5 pin as hsusb0_data5 */
-	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0));
-
-	return 0;
-}
-
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_GENERIC_MMC)
-void board_mmc_power_init(void)
-{
-	twl4030_power_mmc_init(0);
-}
-#endif
-
-#ifdef CONFIG_SMC911X
-/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
-static const u32 gpmc_lan92xx_config[] = {
-	NET_LAN92XX_GPMC_CONFIG1,
-	NET_LAN92XX_GPMC_CONFIG2,
-	NET_LAN92XX_GPMC_CONFIG3,
-	NET_LAN92XX_GPMC_CONFIG4,
-	NET_LAN92XX_GPMC_CONFIG5,
-	NET_LAN92XX_GPMC_CONFIG6,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],
-			CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
-
-	return smc911x_initialize(0, CONFIG_SMC911X_BASE);
-}
-#endif
-
-/*
- * IEN  - Input Enable
- * IDIS - Input Disable
- * PTD  - Pull type Down
- * PTU  - Pull type Up
- * DIS  - Pull type selection is inactive
- * EN   - Pull type selection is active
- * M0   - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	/*GPMC*/
-	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTD | DIS | M0));
-	MUX_VAL(CP(GPMC_NCS5),          (IDIS | PTU | DIS | M4));
-	MUX_VAL(CP(GPMC_NCS7),		(IDIS | PTD | DIS | M1)); /*GPMC_IO_DIR*/
-	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0));
-
-	/*Expansion card  */
-	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0));
-	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0));
-
-	/* Serial Console */
-	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0));
-	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M0));
-	MUX_VAL(CP(UART1_CTS),		(IEN  | PTU | DIS | M0));
-	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0));
-
-	/* I2C */
-	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0));
-
-	MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M0));
-
-	/*Control and debug */
-	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0));
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0));
-	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0));
-	MUX_VAL(CP(JTAG_NTRST),		(IEN  | PTD | DIS | M0));
-	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0));
-}
diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h
deleted file mode 100644
index 3a3ef6e..0000000
--- a/board/logicpd/omap3som/omap3logic.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * (C) Copyright 2011
- * Logic Product Development <www.logicpd.com>
- *
- * Author:
- * Peter Barada <peter.barada at logicpd.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _OMAP3LOGIC_H_
-#define _OMAP3LOGIC_H_
-
-/*
- * OMAP3 GPMC register settings for CS1 LAN922x
- */
-#define NET_LAN92XX_GPMC_CONFIG1	0x00001000
-#define NET_LAN92XX_GPMC_CONFIG2	0x00080801
-#define NET_LAN92XX_GPMC_CONFIG3	0x00000000
-#define NET_LAN92XX_GPMC_CONFIG4	0x08010801
-#define NET_LAN92XX_GPMC_CONFIG5	0x00080a0a
-#define NET_LAN92XX_GPMC_CONFIG6	0x03000280
-
-
-const omap3_sysinfo sysinfo = {
-	DDR_DISCRETE,
-	"Logic DM37x/OMAP35x reference board",
-	"NAND",
-};
-
-
-#endif
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
deleted file mode 100644
index 5d0ac9e..0000000
--- a/configs/omap3_logic_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP34XX=y
-CONFIG_TARGET_OMAP3_LOGIC=y
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_SYS_PROMPT="OMAP Logic # "
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
deleted file mode 100644
index e09e617..0000000
--- a/include/configs/omap3_logic.h
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
- *	Peter Barada <peter.barada at logicpd.com>
- *
- * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
- * reference boards.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP			/* in a TI OMAP core */
-#define CONFIG_OMAP3_LOGIC		/* working with Logic OMAP boards */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
-#define CONFIG_SYS_TEXT_BASE	0x80400000
-
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h>	/* get chip and board defs */
-#include <asm/arch/omap.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R		/* misc_init_r dumps the die id */
-
-#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_CMDLINE_EDITING			/* cmd line edit/history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK		/* check keypress w/no delay */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
-#define CONFIG_SERIAL1			1	/* UART1 on OMAP Logic boards */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
-					115200}
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-/* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(x-loader),"\
-					"1920k(u-boot),128k(u-boot-env),"\
-					"4m(kernel),-(fs)"
-
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
-#define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_NAND_LOCK_UNLOCK	/* nand (un)lock commands	*/
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_QUIET_TEST
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
-							/* NAND devices */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
-							/* partition */
-
-/* Environment information */
-#define CONFIG_BOOTDELAY		2
-
-/*
- * PREBOOT assumes the 4.3" display is attached.  User can interrupt
- * and modify display variable to suit their needs.
- */
-#define CONFIG_PREBOOT \
-	"echo ======================NOTICE============================;"\
-	"echo \"The u-boot environment is not set.\";"			\
-	"echo \"If using a display a valid display varible for your panel\";" \
-	"echo \"needs to be set.\";"					\
-	"echo \"Valid display options are:\";"				\
-	"echo \"  2 == LQ121S1DG31     TFT SVGA    (12.1)  Sharp\";"	\
-	"echo \"  3 == LQ036Q1DA01     TFT QVGA    (3.6)   Sharp w/ASIC\";" \
-	"echo \"  5 == LQ064D343       TFT VGA     (6.4)   Sharp\";"	\
-	"echo \"  7 == LQ10D368        TFT VGA     (10.4)  Sharp\";"	\
-	"echo \" 15 == LQ043T1DG01     TFT WQVGA   (4.3)   Sharp (DEFAULT)\";" \
-	"echo \" vga[-dvi or -hdmi]    LCD VGA     640x480\";"          \
-	"echo \" svga[-dvi or -hdmi]   LCD SVGA    800x600\";"          \
-	"echo \" xga[-dvi or -hdmi]    LCD XGA     1024x768\";"         \
-	"echo \" 720p[-dvi or -hdmi]   LCD 720P    1280x720\";"         \
-	"echo \"Defaulting to 4.3 LCD panel (display=15).\";"		\
-	"setenv display 15;"						\
-	"setenv preboot;"						\
-	"saveenv;"
-
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x81000000\0" \
-	"bootfile=uImage\0" \
-	"mtdids=" MTDIDS_DEFAULT "\0"	\
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-	"mmcdev=0\0" \
-	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
-			"if run loadbootscript; then " \
-				"run bootscript; " \
-			"else " \
-				"run defaultboot;" \
-			"fi; " \
-		"else run defaultboot; fi\0" \
-	"defaultboot=run mmcramboot\0" \
-	"consoledevice=ttyO0\0" \
-	"display=15\0" \
-	"setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
-	"dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
-	"rotation=0\0" \
-	"vrfb_arg=if itest ${rotation} -ne 0; then " \
-		"setenv bootargs ${bootargs} omapfb.vrfb=y " \
-		"omapfb.rotate=${rotation}; " \
-		"fi\0" \
-	"otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \
-	"addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
-	"common_bootargs=setenv bootargs ${bootargs} display=${display} " \
-		"${otherbootargs};" \
-		"run addmtdparts; " \
-		"run vrfb_arg\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo 'Running bootscript from mmc ...'; " \
-		"source ${loadaddr}\0" \
-	"loaduimage=mmc rescan ${mmcdev}; " \
-		"fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
-	"ramdisksize=64000\0" \
-	"ramdiskaddr=0x82000000\0" \
-	"ramdiskimage=rootfs.ext2.gz.uboot\0" \
-	"ramargs=run setconsole; setenv bootargs console=${console} " \
-		"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
-	"mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \
-		"run ramargs; " \
-		"run common_bootargs; " \
-		"run dump_bootargs; " \
-		"run loaduimage; " \
-		"fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\
-		"bootm ${loadaddr} ${ramdiskaddr}\0" \
-	"ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
-		"run ramargs; " \
-		"run common_bootargs; " \
-		"run dump_bootargs; " \
-		"tftpboot ${loadaddr} ${bootfile}; "\
-		"tftpboot ${ramdiskaddr} ${ramdiskimage}; "\
-		"bootm ${loadaddr} ${ramdiskaddr}\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"run autoboot"
-
-#define CONFIG_AUTO_COMPLETE
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
-								/* address */
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/*
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		NAND_BASE
-#elif defined(CONFIG_CMD_ONENAND)
-#define CONFIG_SYS_FLASH_BASE		ONENAND_MAP
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#endif
-
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-/*
- * SMSC922x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_SMC911X_BASE	0x08000000
-
-#endif /* (CONFIG_CMD_NET) */
-
-/*
- * BOOTP fields
- */
-
-#define CONFIG_BOOTP_SUBNETMASK		0x00000001
-#define CONFIG_BOOTP_GATEWAY		0x00000002
-#define CONFIG_BOOTP_HOSTNAME		0x00000004
-#define CONFIG_BOOTP_BOOTPATH		0x00000010
-
-#endif /* __CONFIG_H */
-- 
2.5.0.457.gab17608



More information about the U-Boot mailing list