[U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver

[Bin Meng]

Hi Simon,

On Sat, Aug 15, 2015 at 3:07 PM, Bin Meng <bmeng.cn at gmail.com> wrote:
> This adds a new driver to support National Semiconductor 16550
> compatible UART device with PCI interface. The initial support
> only adds device IDs for Intel Topcliff chipset UART devices.
>
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>
>  drivers/serial/Kconfig      |  9 ++++++
>  drivers/serial/Makefile     |  1 +
>  drivers/serial/serial_pci.c | 75 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 85 insertions(+)
>  create mode 100644 drivers/serial/serial_pci.c
>
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index fd126a8..f2eccdd 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -128,3 +128,12 @@ config X86_SERIAL
>           enabled in the device tree with the correct input clock frequency
>           provided (default 1843200). Enable this to obtain serial console
>           output.
> +
> +config PCI_SERIAL
> +       bool "Support for 16550 serial port on PCI bus"
> +       depends on DM_PCI
> +       default n
> +       help
> +         This is the UART driver for ns16550 compatible chipset with PCI
> +         interface. This can be enabled in the device tree with the correct
> +         properties provided. If unsure, say N.
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index 1d1f036..a7e2cd2 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o
>  obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
>  obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o
>  obj-$(CONFIG_X86_SERIAL) += serial_x86.o
> +obj-$(CONFIG_PCI_SERIAL) += serial_pci.o
>  obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o
>
>  ifndef CONFIG_SPL_BUILD
> diff --git a/drivers/serial/serial_pci.c b/drivers/serial/serial_pci.c
> new file mode 100644
> index 0000000..bc87c9a
> --- /dev/null
> +++ b/drivers/serial/serial_pci.c
> @@ -0,0 +1,75 @@
> +/*
> + * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
> + *
> + * This driver aims to support National Semiconductor 16550 compatible
> + * UART device with PCI interface.
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <fdtdec.h>
> +#include <ns16550.h>
> +#include <serial.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static struct pci_device_id supported[] = {
> +       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_UART_0) },
> +       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_UART_1) },
> +       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_UART_2) },
> +       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_UART_3) },
> +       {}
> +};
> +
> +static const struct udevice_id pci_serial_ids[] = {
> +       { .compatible = "pci-uart" },
> +       { }
> +};
> +
> +static int pci_serial_ofdata_to_platdata(struct udevice *dev)
> +{
> +       struct ns16550_platdata *plat = dev_get_platdata(dev);
> +       struct fdt_pci_addr pci_addr;
> +       u32 bar;
> +       int ret;
> +
> +       /* we prefer to use a memory-mapped register */
> +       ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
> +                                 FDT_PCI_SPACE_MEM32, "reg", &pci_addr);
> +       if (ret) {
> +               /* try if there is any i/o-mapped register */
> +               ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
> +                                         FDT_PCI_SPACE_IO, "reg", &pci_addr);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset,
> +                                  &pci_addr, &bar);
> +       if (ret)
> +               return ret;
> +
> +       plat->base = bar;
> +       plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
> +                                        "reg-shift", 1);
> +       plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
> +                                    "clock-frequency", 1843200);
> +
> +       return 0;
> +}
> +
> +U_BOOT_DRIVER(serial_pci) = {
> +       .name = "serial_pci",
> +       .id = UCLASS_SERIAL,
> +       .of_match = pci_serial_ids,
> +       .ofdata_to_platdata = pci_serial_ofdata_to_platdata,
> +       .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
> +       .priv_auto_alloc_size = sizeof(struct NS16550),
> +       .probe = ns16550_serial_probe,
> +       .ops = &ns16550_serial_ops,
> +       .flags = DM_FLAG_PRE_RELOC,
> +};
> +
> +U_BOOT_PCI_DEVICE(serial_pci, supported);
> --

Just found that this patch needs to be rebased on latest
u-boot-x86/master in order to apply cleanly. Will send v2 after the
review.

Regards,
Bin