[U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board

[Yuantian Tang]

> -----Original Message-----
> From: Kushwaha Prabhakar-B32579
> Sent: Wednesday, August 19, 2015 12:15 PM
> To: Tang Yuantian-B29983; Sun York-R58495
> Cc: u-boot at lists.denx.de; Wang Huan-B18965
> Subject: RE: [PATCH v2] arm/ls1021a: Add sata support on qds and twr board
> 
> 
> > -----Original Message-----
> > From: Tang Yuantian-B29983
> > Sent: Wednesday, August 19, 2015 8:01 AM
> > To: Sun York-R58495
> > Cc: u-boot at lists.denx.de; Kushwaha Prabhakar-B32579; Wang Huan-
> B18965
> > Subject: RE: [PATCH v2] arm/ls1021a: Add sata support on qds and twr
> board
> >
> > > > +#ifdef CONFIG_SYS_FSL_ERRATUM_A008407
> > > > +#define SATA_ECC_REG_ADDR	0x20220520
> > > > +	unsigned int __iomem *ecc_reg = (void *)SATA_ECC_REG_ADDR;
> > > #endif
> > > > +
> > > > +	out_le32(&ccsr_ahci->ppcfg, 0xa003fffe);
> > > > +	out_le32(&ccsr_ahci->pp2c, 0x28183411);
> > > > +	out_le32(&ccsr_ahci->pp3c, 0x0e081004);
> > > > +	out_le32(&ccsr_ahci->pp4c, 0x00480811);
> > > > +	out_le32(&ccsr_ahci->pp5c, 0x192c96a4);
> > > > +	out_le32(&ccsr_ahci->ptc, 0x08000025);
> > >
> 
> It looks to be SoC specific configuration. It should be in soc files not in board
> files.
> 
On other LS platforms we only need to set one register which is out_le32(&ccsr_ahci->ppcfg, 0xa003fffe).
There are did much same settings about sata between LS platforms.
I thought about merging all the LS sata initialization together.
Please see the patch:
http://patchwork.ozlabs.org/patch/497983/
But I didn't see much benefit this way. So I send the sata patch one platform to another.

Regards,
Yuantian

> --prabhakar