[U-Boot] [PATCH] ARM: tegra: Add p2371-2180 board
Stephen Warren
swarren at wwwdotorg.org
Fri Aug 14 06:34:22 CEST 2015
From: Stephen Warren <swarren at nvidia.com>
P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The
combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and
two GPIO expansion headers.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/tegra210-p2371-2180.dts | 60 +++++
arch/arm/mach-tegra/tegra210/Kconfig | 9 +
board/nvidia/p2371-2180/Kconfig | 12 +
board/nvidia/p2371-2180/MAINTAINERS | 6 +
board/nvidia/p2371-2180/Makefile | 8 +
board/nvidia/p2371-2180/p2371-2180.c | 51 ++++
board/nvidia/p2371-2180/pinmux-config-p2371-2180.h | 265 +++++++++++++++++++++
configs/p2371-2180_defconfig | 17 ++
include/configs/p2371-2180.h | 65 +++++
10 files changed, 494 insertions(+)
create mode 100644 arch/arm/dts/tegra210-p2371-2180.dts
create mode 100644 board/nvidia/p2371-2180/Kconfig
create mode 100644 board/nvidia/p2371-2180/MAINTAINERS
create mode 100644 board/nvidia/p2371-2180/Makefile
create mode 100644 board/nvidia/p2371-2180/p2371-2180.c
create mode 100644 board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
create mode 100644 configs/p2371-2180_defconfig
create mode 100644 include/configs/p2371-2180.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ff868910146a..300eb630b08b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra124-venice2.dtb \
tegra210-e2220-1170.dtb \
tegra210-p2371-0000.dtb \
+ tegra210-p2371-2180.dtb \
tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-sld3-ref.dtb \
diff --git a/arch/arm/dts/tegra210-p2371-2180.dts b/arch/arm/dts/tegra210-p2371-2180.dts
new file mode 100644
index 000000000000..5d9adcff31c3
--- /dev/null
+++ b/arch/arm/dts/tegra210-p2371-2180.dts
@@ -0,0 +1,60 @@
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+ model = "NVIDIA P2371-2180";
+ compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+
+ chosen {
+ stdout-path = &uarta;
+ };
+
+ aliases {
+ i2c0 = "/i2c at 0,7000d000";
+ sdhci0 = "/sdhci at 0,700b0600";
+ sdhci1 = "/sdhci at 0,700b0000";
+ usb0 = "/usb at 0,7d000000";
+ };
+
+ memory {
+ reg = <0x0 0x80000000 0x0 0xc0000000>;
+ };
+
+ sdhci at 0,700b0000 {
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ };
+
+ sdhci at 0,700b0600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ i2c at 0,7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ usb at 0,7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock at 0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig
index bd34db711738..b07363a4c38c 100644
--- a/arch/arm/mach-tegra/tegra210/Kconfig
+++ b/arch/arm/mach-tegra/tegra210/Kconfig
@@ -18,6 +18,14 @@ config TARGET_P2371_0000
HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA,
a GPIO expansion header, and an analog audio jack.
+config TARGET_P2371_2180
+ bool "NVIDIA Tegra210 P2371-2180 board"
+ help
+ P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The
+ combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
+ micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and
+ two GPIO expansion headers.
+
config TARGET_P2571
bool "NVIDIA Tegra210 P2571 base board"
help
@@ -30,6 +38,7 @@ config SYS_SOC
source "board/nvidia/e2220-1170/Kconfig"
source "board/nvidia/p2371-0000/Kconfig"
+source "board/nvidia/p2371-2180/Kconfig"
source "board/nvidia/p2571/Kconfig"
endif
diff --git a/board/nvidia/p2371-2180/Kconfig b/board/nvidia/p2371-2180/Kconfig
new file mode 100644
index 000000000000..8622bdaa16bc
--- /dev/null
+++ b/board/nvidia/p2371-2180/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_P2371_2180
+
+config SYS_BOARD
+ default "p2371-2180"
+
+config SYS_VENDOR
+ default "nvidia"
+
+config SYS_CONFIG_NAME
+ default "p2371-2180"
+
+endif
diff --git a/board/nvidia/p2371-2180/MAINTAINERS b/board/nvidia/p2371-2180/MAINTAINERS
new file mode 100644
index 000000000000..815377490c7f
--- /dev/null
+++ b/board/nvidia/p2371-2180/MAINTAINERS
@@ -0,0 +1,6 @@
+P2371-2180 BOARD
+M: Tom Warren <twarren at nvidia.com>
+S: Maintained
+F: board/nvidia/p2371-2180/
+F: include/configs/p2371-2180.h
+F: configs/p2371-2180_defconfig
diff --git a/board/nvidia/p2371-2180/Makefile b/board/nvidia/p2371-2180/Makefile
new file mode 100644
index 000000000000..10aefb071e60
--- /dev/null
+++ b/board/nvidia/p2371-2180/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2013-2015
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += p2371-2180.o
diff --git a/board/nvidia/p2371-2180/p2371-2180.c b/board/nvidia/p2371-2180/p2371-2180.c
new file mode 100644
index 000000000000..cf2dd0b14f00
--- /dev/null
+++ b/board/nvidia/p2371-2180/p2371-2180.c
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include "../p2571/max77620_init.h"
+#include "pinmux-config-p2371-2180.h"
+
+void pin_mux_mmc(void)
+{
+ struct udevice *dev;
+ uchar val;
+ int ret;
+
+ /* Turn on MAX77620 LDO2 to 3.3V for SD card power */
+ debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
+ ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
+ return;
+ }
+ /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+ val = 0xF2;
+ ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
+ if (ret)
+ printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
+}
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_clear_tristate_input_clamping();
+
+ gpio_config_table(p2371_2180_gpio_inits,
+ ARRAY_SIZE(p2371_2180_gpio_inits));
+
+ pinmux_config_pingrp_table(p2371_2180_pingrps,
+ ARRAY_SIZE(p2371_2180_pingrps));
+
+ pinmux_config_drvgrp_table(p2371_2180_drvgrps,
+ ARRAY_SIZE(p2371_2180_drvgrps));
+}
diff --git a/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
new file mode 100644
index 000000000000..ff89b9ee4b0f
--- /dev/null
+++ b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * THIS FILE IS AUTO-GENERATED - DO NOT EDIT!
+ *
+ * To generate this file, use the tegra-pinmux-scripts tool available from
+ * https://github.com/NVIDIA/tegra-pinmux-scripts
+ * Run "board-to-uboot.py p2371-2180".
+ */
+
+#ifndef _PINMUX_CONFIG_P2371_2180_H_
+#define _PINMUX_CONFIG_P2371_2180_H_
+
+#define GPIO_INIT(_gpio, _init) \
+ { \
+ .gpio = GPIO_P##_gpio, \
+ .init = TEGRA_GPIO_INIT_##_init, \
+ }
+
+static const struct tegra_gpio_config p2371_2180_gpio_inits[] = {
+ /* gpio, init_val */
+ GPIO_INIT(A5, IN),
+ GPIO_INIT(E6, IN),
+ GPIO_INIT(H0, OUT0),
+ GPIO_INIT(H1, OUT0),
+ GPIO_INIT(H2, IN),
+ GPIO_INIT(H3, OUT0),
+ GPIO_INIT(H4, OUT0),
+ GPIO_INIT(H5, IN),
+ GPIO_INIT(H6, IN),
+ GPIO_INIT(H7, OUT0),
+ GPIO_INIT(I0, OUT0),
+ GPIO_INIT(I1, IN),
+ GPIO_INIT(I2, OUT0),
+ GPIO_INIT(K4, IN),
+ GPIO_INIT(K5, OUT0),
+ GPIO_INIT(K6, IN),
+ GPIO_INIT(K7, IN),
+ GPIO_INIT(L1, IN),
+ GPIO_INIT(S4, OUT0),
+ GPIO_INIT(S5, OUT0),
+ GPIO_INIT(S6, OUT0),
+ GPIO_INIT(S7, OUT0),
+ GPIO_INIT(T0, OUT0),
+ GPIO_INIT(T1, OUT0),
+ GPIO_INIT(V1, OUT0),
+ GPIO_INIT(V2, OUT0),
+ GPIO_INIT(V3, IN),
+ GPIO_INIT(V5, OUT0),
+ GPIO_INIT(V6, OUT0),
+ GPIO_INIT(X0, IN),
+ GPIO_INIT(X1, IN),
+ GPIO_INIT(X2, IN),
+ GPIO_INIT(X3, IN),
+ GPIO_INIT(X4, IN),
+ GPIO_INIT(X5, IN),
+ GPIO_INIT(X6, IN),
+ GPIO_INIT(X7, IN),
+ GPIO_INIT(Y0, IN),
+ GPIO_INIT(Y1, IN),
+ GPIO_INIT(Z0, IN),
+ GPIO_INIT(Z2, IN),
+ GPIO_INIT(Z3, OUT0),
+ GPIO_INIT(BB2, OUT0),
+ GPIO_INIT(BB3, OUT0),
+ GPIO_INIT(CC1, IN),
+};
+
+#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .od = PMUX_PIN_OD_##_od, \
+ .e_io_hv = PMUX_PIN_E_IO_HV_##_e_io_hv, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ }
+
+static const struct pmux_pingrp_config p2371_2180_pingrps[] = {
+ /* pingrp, mux, pull, tri, e_input, od, e_io_hv */
+ PINCFG(PEX_L0_RST_N_PA0, PE0, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH),
+ PINCFG(PEX_L0_CLKREQ_N_PA1, PE0, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(PEX_WAKE_N_PA2, PE, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(PEX_L1_RST_N_PA3, PE1, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH),
+ PINCFG(PEX_L1_CLKREQ_N_PA4, PE1, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(SATA_LED_ACTIVE_PA5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PA6, SATA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_FS_PB0, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_DIN_PB1, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_DOUT_PB2, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_SCLK_PB3, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_MOSI_PB4, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_MISO_PB5, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_SCK_PB6, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_CS0_PB7, SPI2, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_MOSI_PC0, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_MISO_PC1, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_SCK_PC2, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_CS0_PC3, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_CS1_PC4, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_SCK_PC5, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_CS0_PC6, SPI4, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_MOSI_PC7, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_MISO_PD0, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_TX_PD1, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_RX_PD2, UARTC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_RTS_PD3, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_CTS_PD4, UARTC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC1_CLK_PE0, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC1_DAT_PE1, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC2_CLK_PE2, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC2_DAT_PE3, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC3_CLK_PE4, DMIC3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC3_DAT_PE5, DMIC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PE6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PE7, PWM3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GEN3_I2C_SCL_PF0, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(GEN3_I2C_SDA_PF1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(UART2_TX_PG0, UARTB, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART2_RX_PG1, UARTB, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART2_RTS_PG2, UARTB, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART2_CTS_PG3, UARTB, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(WIFI_EN_PH0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(WIFI_RST_PH1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(WIFI_WAKE_AP_PH2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(AP_WAKE_BT_PH3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(BT_RST_PH4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(BT_WAKE_AP_PH5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PH6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(AP_WAKE_NFC_PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(NFC_EN_PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(NFC_INT_PI1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(GPS_EN_PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GPS_RST_PI3, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_TX_PI4, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_RX_PI5, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_RTS_PI6, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_CTS_PI7, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(GEN1_I2C_SDA_PJ0, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(GEN1_I2C_SCL_PJ1, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(GEN2_I2C_SCL_PJ2, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(GEN2_I2C_SDA_PJ3, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(DAP4_FS_PJ4, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP4_DIN_PJ5, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP4_DOUT_PJ6, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP4_SCLK_PJ7, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK0, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK1, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK2, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK3, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PK6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PL0, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PL1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_CLK_PM0, SDMMC1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_CMD_PM1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT3_PM2, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT2_PM3, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT1_PM4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT0_PM5, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_CLK_PP0, SDMMC3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_CMD_PP1, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT3_PP2, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT2_PP3, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT1_PP4, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT0_PP5, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(CAM1_MCLK_PS0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM2_MCLK_PS1, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_I2C_SCL_PS2, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(CAM_I2C_SDA_PS3, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(CAM_RST_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_AF_EN_PS5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_FLASH_EN_PS6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM1_PWDN_PS7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM2_PWDN_PT0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM1_STROBE_PT1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_TX_PU0, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_RX_PU1, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_RTS_PU2, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_CTS_PU3, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_BL_PWM_PV0, PWM0, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_BL_EN_PV1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_RST_PV2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_GPIO1_PV3, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_GPIO2_PV4, PWM1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(AP_READY_PV5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(TOUCH_RST_PV6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(TOUCH_CLK_PV7, TOUCH, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(MODEM_WAKE_AP_PX0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(TOUCH_INT_PX1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(MOTION_INT_PX2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(ALS_PROX_INT_PX3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(TEMP_ALERT_PX4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_POWER_ON_PX5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_VOL_UP_PX6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_VOL_DOWN_PX7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_SLIDE_SW_PY0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_HOME_PY1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_TE_PY2, DISPLAYA, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PWR_I2C_SCL_PY3, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(PWR_I2C_SDA_PY4, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(CLK_32K_OUT_PY5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PZ4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_FS_PAA0, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_SCLK_PAA1, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_DIN_PAA2, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_DOUT_PAA3, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(AUD_MCLK_PBB0, AUD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DVFS_PWM_PBB1, CLDVFS, NORMAL, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DVFS_CLK_PBB2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GPIO_X1_AUD_PBB3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GPIO_X3_AUD_PBB4, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(HDMI_CEC_PCC0, CEC, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(SPDIF_OUT_PCC2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(SPDIF_IN_PCC3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(USB_VBUS_EN0_PCC4, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(USB_VBUS_EN1_PCC5, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(DP_HPD0_PCC6, DP, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PCC7, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL),
+ PINCFG(SPI2_CS1_PDD0, SPI2, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_SCK_PEE0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_CS_N_PEE1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO0_PEE2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO1_PEE3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO2_PEE4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO3_PEE5, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CORE_PWR_REQ, CORE, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PWR_INT_N, PMI, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(JTAG_RTCK, JTAG, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CLK_REQ, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(SHUTDOWN, SHUTDOWN, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+};
+
+#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static const struct pmux_drvgrp_config p2371_2180_drvgrps[] = {
+};
+
+#endif /* PINMUX_CONFIG_P2371_2180_H */
diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig
new file mode 100644
index 000000000000..83fde57a0c46
--- /dev/null
+++ b/configs/p2371-2180_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_TEGRA=y
+CONFIG_TEGRA210=y
+CONFIG_TARGET_P2371_2180=y
+CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-2180"
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_SPL_DM=y
+CONFIG_TEGRA114_SPI=y
+CONFIG_SPI_FLASH=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h
new file mode 100644
index 000000000000..378d5a905e93
--- /dev/null
+++ b/include/configs/p2371-2180.h
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _P2371_2180_H
+#define _P2371_2180_H
+
+#include <linux/sizes.h>
+
+#include "tegra210-common.h"
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra210 (P2371-2180) # "
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+
+/* SPI */
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB2.0 Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_DHCP
+
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+#define COUNTER_FREQUENCY 38400000
+
+#endif /* _P2371_2180_H */
--
1.9.1
More information about the U-Boot
mailing list