[U-Boot] [PATCH 3/4] mmc: dw_mmc: Improve handling of data transfer failure
Pantelis Antoniou
panto at antoniou-consulting.com
Wed Aug 12 09:27:48 CEST 2015
Hi Marek,
> On Jul 27, 2015, at 23:39 , Marek Vasut <marex at denx.de> wrote:
>
> In case the data transfer failure happens, instead of returning
> immediatelly, make sure the DMA is disabled, status register is
> cleared and the bounce buffer is stopped.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> Cc: Pantelis Antoniou <panto at antoniou-consulting.com>
> Cc: Tom Rini <trini at konsulko.com>
> ---
> drivers/mmc/dw_mmc.c | 16 +++++++++-------
> 1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> index 0f61f16..fcd5784 100644
> --- a/drivers/mmc/dw_mmc.c
> +++ b/drivers/mmc/dw_mmc.c
> @@ -110,7 +110,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
> struct dwmci_host *host = mmc->priv;
> ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac,
> data ? DIV_ROUND_UP(data->blocks, 8) : 0);
> - int flags = 0, i;
> + int ret = 0, flags = 0, i;
> unsigned int timeout = 100000;
> u32 retry = 10000;
> u32 mask, ctrl;
> @@ -218,20 +218,22 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
> /* Error during data transfer. */
> if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
> printf("%s: DATA ERROR!\n", __func__);
> - bounce_buffer_stop(&bbstate);
> - return -1;
> + ret = -EINVAL;
> + break;
> }
>
> /* Data arrived correctly. */
> - if (mask & DWMCI_INTMSK_DTO)
> + if (mask & DWMCI_INTMSK_DTO) {
> + ret = 0;
> break;
> + }
>
> /* Check for timeout. */
> if (get_timer(start) > timeout) {
> printf("%s: Timeout waiting for data!\n",
> __func__);
> - bounce_buffer_stop(&bbstate);
> - return TIMEOUT;
> + ret = TIMEOUT;
> + break;
> }
> }
>
> @@ -246,7 +248,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
>
> udelay(100);
>
> - return 0;
> + return ret;
> }
>
> static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
> --
> 2.1.4
Applied, thanks
— Pantelis
More information about the U-Boot
mailing list