[U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs

[Ian Campbell]

On Sat, 2015-08-15 at 22:02 +0200, Hans de Goede wrote:
> Other then having a few less chip-select lines the nand controller
> on sun4i, sun5i and sun7i is identical.
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  board/sunxi/board.c      | 12 +++++++++---
>  drivers/mtd/nand/Kconfig |  4 ++--
>  2 files changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index 1ebd0a4..d411e96 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -112,13 +112,19 @@ int dram_init(void)
>  static void nand_pinmux_setup(void)
>  {
>  	unsigned int pin;
> -	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++)
> -		sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
>  
> -	for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(22); pin++)
> +	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(19); pin++)

This looks to have added GPC(7) to all platforms, was that intentional?

Ian.