[U-Boot] [PATCH 1/3] ARM: tegra: move kernel_addr_r on T210

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

The new value is the most likely value where the kernel wants to end up
at run-time. Selecting this value as the load address likely avoids the
need to copy the kernel image from the actual load address to the desired
load address. Note that this isn't guaranteed since the kernel may wish
to run at an arbitrary location. In that case, U-Boot will still relocate
the image according to its wishes; this change is a performance
optimization, not a hard-coding of the final image location.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 include/configs/tegra210-common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h
index d95056c00261..e6c815212d7b 100644
--- a/include/configs/tegra210-common.h
+++ b/include/configs/tegra210-common.h
@@ -55,7 +55,7 @@
  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
  */
-#define CONFIG_LOADADDR 0x81000000
+#define CONFIG_LOADADDR 0x80080000
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x90000000\0" \
 	"pxefile_addr_r=0x90100000\0" \
-- 
1.9.1