[U-Boot] [PATCH v4 21/33] rockchip: rk3288: Add clock driver
Simon Glass
sjg at chromium.org
Mon Aug 24 17:12:39 CEST 2015
Add a driver for setting up and modifying the various PLLs and peripheral
clocks on the RK3288.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/include/asm/arch-rockchip/cru_rk3288.h | 185 +++++++
drivers/clk/Makefile | 1 +
drivers/clk/clk_rk3288.c | 618 ++++++++++++++++++++++++
3 files changed, 804 insertions(+)
create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3288.h
create mode 100644 drivers/clk/clk_rk3288.c
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
new file mode 100644
index 0000000..7ebcc40
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
@@ -0,0 +1,185 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * (C) Copyright 2008-2014 Rockchip Electronics
+ * Peter, Software Engineering, <superpeter.cai at gmail.com>.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _ASM_ARCH_CRU_RK3288_H
+#define _ASM_ARCH_CRU_RK3288_H
+
+#define OSC_HZ (24 * 1000 * 1000)
+
+#define APLL_HZ (1800 * 1000000)
+#define GPLL_HZ (594 * 1000000)
+#define CPLL_HZ (384 * 1000000)
+#define NPLL_HZ (384 * 1000000)
+
+/* The SRAM is clocked off aclk_bus, so we want to max it out for boot speed */
+#define PD_BUS_ACLK_HZ 297000000
+#define PD_BUS_HCLK_HZ 148500000
+#define PD_BUS_PCLK_HZ 74250000
+
+#define PERI_ACLK_HZ 148500000
+#define PERI_HCLK_HZ 148500000
+#define PERI_PCLK_HZ 74250000
+
+struct rk3288_cru {
+ struct rk3288_pll {
+ u32 con0;
+ u32 con1;
+ u32 con2;
+ u32 con3;
+ } pll[5];
+ u32 cru_mode_con;
+ u32 reserved0[3];
+ u32 cru_clksel_con[43];
+ u32 reserved1[21];
+ u32 cru_clkgate_con[19];
+ u32 reserved2;
+ u32 cru_glb_srst_fst_value;
+ u32 cru_glb_srst_snd_value;
+ u32 cru_softrst_con[12];
+ u32 cru_misc_con;
+ u32 cru_glb_cnt_th;
+ u32 cru_glb_rst_con;
+ u32 reserved3;
+ u32 cru_glb_rst_st;
+ u32 reserved4;
+ u32 cru_sdmmc_con[2];
+ u32 cru_sdio0_con[2];
+ u32 cru_sdio1_con[2];
+ u32 cru_emmc_con[2];
+};
+check_member(rk3288_cru, cru_emmc_con[1], 0x021c);
+
+/* CRU_CLKSEL11_CON */
+enum {
+ HSICPHY_DIV_SHIFT = 8,
+ HSICPHY_DIV_MASK = 0x3f,
+
+ MMC0_PLL_SHIFT = 6,
+ MMC0_PLL_MASK = 3,
+ MMC0_PLL_SELECT_CODEC = 0,
+ MMC0_PLL_SELECT_GENERAL,
+ MMC0_PLL_SELECT_24MHZ,
+
+ MMC0_DIV_SHIFT = 0,
+ MMC0_DIV_MASK = 0x3f,
+};
+
+/* CRU_CLKSEL12_CON */
+enum {
+ EMMC_PLL_SHIFT = 0xe,
+ EMMC_PLL_MASK = 3,
+ EMMC_PLL_SELECT_CODEC = 0,
+ EMMC_PLL_SELECT_GENERAL,
+ EMMC_PLL_SELECT_24MHZ,
+
+ EMMC_DIV_SHIFT = 8,
+ EMMC_DIV_MASK = 0x3f,
+
+ SDIO0_PLL_SHIFT = 6,
+ SDIO0_PLL_MASK = 3,
+ SDIO0_PLL_SELECT_CODEC = 0,
+ SDIO0_PLL_SELECT_GENERAL,
+ SDIO0_PLL_SELECT_24MHZ,
+
+ SDIO0_DIV_SHIFT = 0,
+ SDIO0_DIV_MASK = 0x3f,
+};
+
+/* CRU_CLKSEL25_CON */
+enum {
+ SPI1_PLL_SHIFT = 0xf,
+ SPI1_PLL_MASK = 1,
+ SPI1_PLL_SELECT_CODEC = 0,
+ SPI1_PLL_SELECT_GENERAL,
+
+ SPI1_DIV_SHIFT = 8,
+ SPI1_DIV_MASK = 0x7f,
+
+ SPI0_PLL_SHIFT = 7,
+ SPI0_PLL_MASK = 1,
+ SPI0_PLL_SELECT_CODEC = 0,
+ SPI0_PLL_SELECT_GENERAL,
+
+ SPI0_DIV_SHIFT = 0,
+ SPI0_DIV_MASK = 0x7f,
+};
+
+/* CRU_CLKSEL39_CON */
+enum {
+ ACLK_HEVC_PLL_SHIFT = 0xe,
+ ACLK_HEVC_PLL_MASK = 3,
+ ACLK_HEVC_PLL_SELECT_CODEC = 0,
+ ACLK_HEVC_PLL_SELECT_GENERAL,
+ ACLK_HEVC_PLL_SELECT_NEW,
+
+ ACLK_HEVC_DIV_SHIFT = 8,
+ ACLK_HEVC_DIV_MASK = 0x1f,
+
+ SPI2_PLL_SHIFT = 7,
+ SPI2_PLL_MASK = 1,
+ SPI2_PLL_SELECT_CODEC = 0,
+ SPI2_PLL_SELECT_GENERAL,
+
+ SPI2_DIV_SHIFT = 0,
+ SPI2_DIV_MASK = 0x7f,
+};
+
+/* CRU_MODE_CON */
+enum {
+ NPLL_WORK_SHIFT = 0xe,
+ NPLL_WORK_MASK = 3,
+ NPLL_WORK_SLOW = 0,
+ NPLL_WORK_NORMAL,
+ NPLL_WORK_DEEP,
+
+ GPLL_WORK_SHIFT = 0xc,
+ GPLL_WORK_MASK = 3,
+ GPLL_WORK_SLOW = 0,
+ GPLL_WORK_NORMAL,
+ GPLL_WORK_DEEP,
+
+ CPLL_WORK_SHIFT = 8,
+ CPLL_WORK_MASK = 3,
+ CPLL_WORK_SLOW = 0,
+ CPLL_WORK_NORMAL,
+ CPLL_WORK_DEEP,
+
+ DPLL_WORK_SHIFT = 4,
+ DPLL_WORK_MASK = 3,
+ DPLL_WORK_SLOW = 0,
+ DPLL_WORK_NORMAL,
+ DPLL_WORK_DEEP,
+
+ APLL_WORK_SHIFT = 0,
+ APLL_WORK_MASK = 3,
+ APLL_WORK_SLOW = 0,
+ APLL_WORK_NORMAL,
+ APLL_WORK_DEEP,
+};
+
+/* CRU_APLL_CON0 */
+enum {
+ CLKR_SHIFT = 8,
+ CLKR_MASK = 0x3f,
+
+ CLKOD_SHIFT = 0,
+ CLKOD_MASK = 0xf,
+};
+
+/* CRU_APLL_CON1 */
+enum {
+ LOCK_SHIFT = 0x1f,
+ LOCK_MASK = 1,
+ LOCK_UNLOCK = 0,
+ LOCK_LOCK,
+
+ CLKF_SHIFT = 0,
+ CLKF_MASK = 0x1fff,
+};
+
+#endif
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index bb89fb9..008ec10 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -6,4 +6,5 @@
#
obj-$(CONFIG_CLK) += clk-uclass.o
+obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
obj-$(CONFIG_SANDBOX) += clk_sandbox.o
diff --git a/drivers/clk/clk_rk3288.c b/drivers/clk/clk_rk3288.c
new file mode 100644
index 0000000..54d4930
--- /dev/null
+++ b/drivers/clk/clk_rk3288.c
@@ -0,0 +1,618 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cru_rk3288.h>
+#include <asm/arch/grf_rk3288.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/periph.h>
+#include <dm/lists.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct rk3288_clk_plat {
+ enum rk_clk_id clk_id;
+};
+
+struct rk3288_clk_priv {
+ struct rk3288_grf *grf;
+ struct rk3288_cru *cru;
+ ulong rate;
+};
+
+struct pll_div {
+ u32 nr;
+ u32 nf;
+ u32 no;
+};
+
+enum {
+ VCO_MAX_HZ = 2200U * 1000000,
+ VCO_MIN_HZ = 440 * 1000000,
+ OUTPUT_MAX_HZ = 2200U * 1000000,
+ OUTPUT_MIN_HZ = 27500000,
+ FREF_MAX_HZ = 2200U * 1000000,
+ FREF_MIN_HZ = 269 * 1000000,
+};
+
+enum {
+ /* PLL CON0 */
+ PLL_OD_MASK = 0x0f,
+
+ /* PLL CON1 */
+ PLL_NF_MASK = 0x1fff,
+
+ /* PLL CON2 */
+ PLL_BWADJ_MASK = 0x0fff,
+
+ /* PLL CON3 */
+ PLL_RESET_SHIFT = 5,
+
+ /* CLKSEL1: pd bus clk pll sel: codec or general */
+ PD_BUS_SEL_PLL_MASK = 15,
+ PD_BUS_SEL_CPLL = 0,
+ PD_BUS_SEL_GPLL,
+
+ /* pd bus pclk div: pclk = pd_bus_aclk /(div + 1) */
+ PD_BUS_PCLK_DIV_SHIFT = 12,
+ PD_BUS_PCLK_DIV_MASK = 7,
+
+ /* pd bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */
+ PD_BUS_HCLK_DIV_SHIFT = 8,
+ PD_BUS_HCLK_DIV_MASK = 3,
+
+ /* pd bus aclk div: pd_bus_aclk = pd_bus_src_clk /(div0 * div1) */
+ PD_BUS_ACLK_DIV0_SHIFT = 3,
+ PD_BUS_ACLK_DIV0_MASK = 0x1f,
+ PD_BUS_ACLK_DIV1_SHIFT = 0,
+ PD_BUS_ACLK_DIV1_MASK = 0x7,
+
+ /*
+ * CLKSEL10
+ * peripheral bus pclk div:
+ * aclk_bus: pclk_bus = 1:1 or 2:1 or 4:1 or 8:1
+ */
+ PERI_PCLK_DIV_SHIFT = 12,
+ PERI_PCLK_DIV_MASK = 7,
+
+ /* peripheral bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */
+ PERI_HCLK_DIV_SHIFT = 8,
+ PERI_HCLK_DIV_MASK = 3,
+
+ /*
+ * peripheral bus aclk div:
+ * aclk_periph = periph_clk_src / (peri_aclk_div_con + 1)
+ */
+ PERI_ACLK_DIV_SHIFT = 0,
+ PERI_ACLK_DIV_MASK = 0x1f,
+
+ /* CLKSEL37 */
+ DPLL_MODE_MASK = 0x3,
+ DPLL_MODE_SHIFT = 4,
+ DPLL_MODE_SLOW = 0,
+ DPLL_MODE_NORM,
+
+ CPLL_MODE_MASK = 3,
+ CPLL_MODE_SHIFT = 8,
+ CPLL_MODE_SLOW = 0,
+ CPLL_MODE_NORM,
+
+ GPLL_MODE_MASK = 3,
+ GPLL_MODE_SHIFT = 12,
+ GPLL_MODE_SLOW = 0,
+ GPLL_MODE_NORM,
+
+ NPLL_MODE_MASK = 3,
+ NPLL_MODE_SHIFT = 14,
+ NPLL_MODE_SLOW = 0,
+ NPLL_MODE_NORM,
+
+ SOCSTS_DPLL_LOCK = 1 << 5,
+ SOCSTS_APLL_LOCK = 1 << 6,
+ SOCSTS_CPLL_LOCK = 1 << 7,
+ SOCSTS_GPLL_LOCK = 1 << 8,
+ SOCSTS_NPLL_LOCK = 1 << 9,
+};
+
+#define RATE_TO_DIV(input_rate, output_rate) \
+ ((input_rate) / (output_rate) - 1);
+
+#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
+
+#define PLL_DIVISORS(hz, _nr, _no) {\
+ .nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\
+ _Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
+ (_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\
+ "divisors on line " __stringify(__LINE__));
+
+/* Keep divisors as low as possible to reduce jitter and power usage */
+static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 1);
+static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
+static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
+
+static int rkclk_set_pll(struct rk3288_cru *cru, enum rk_clk_id clk_id,
+ const struct pll_div *div)
+{
+ int pll_id = rk_pll_id(clk_id);
+ struct rk3288_pll *pll = &cru->pll[pll_id];
+ /* All PLLs have same VCO and output frequency range restrictions. */
+ uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
+ uint output_hz = vco_hz / div->no;
+
+ debug("PLL at %p: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
+ pll, div->nf, div->nr, div->no, vco_hz, output_hz);
+ assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
+ output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ &&
+ (div->no == 1 || !(div->no % 2)));
+
+ /* enter rest */
+ rk_setreg(&pll->con3, 1 << PLL_RESET_SHIFT);
+
+ rk_clrsetreg(&pll->con0,
+ CLKR_MASK << CLKR_SHIFT | PLL_OD_MASK,
+ ((div->nr - 1) << CLKR_SHIFT) | (div->no - 1));
+ rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1);
+ rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
+
+ udelay(10);
+
+ /* return form rest */
+ rk_clrreg(&pll->con3, 1 << PLL_RESET_SHIFT);
+
+ return 0;
+}
+
+static inline unsigned int log2(unsigned int value)
+{
+ return fls(value) - 1;
+}
+
+static int rkclk_configure_ddr(struct rk3288_cru *cru, struct rk3288_grf *grf,
+ unsigned int hz)
+{
+ static const struct pll_div dpll_cfg[] = {
+ {.nf = 25, .nr = 2, .no = 1},
+ {.nf = 400, .nr = 9, .no = 2},
+ {.nf = 500, .nr = 9, .no = 2},
+ {.nf = 100, .nr = 3, .no = 1},
+ };
+ int cfg;
+
+ debug("%s: cru=%p, grf=%p, hz=%u\n", __func__, cru, grf, hz);
+ switch (hz) {
+ case 300000000:
+ cfg = 0;
+ break;
+ case 533000000: /* actually 533.3P MHz */
+ cfg = 1;
+ break;
+ case 666000000: /* actually 666.6P MHz */
+ cfg = 2;
+ break;
+ case 800000000:
+ cfg = 3;
+ break;
+ default:
+ debug("Unsupported SDRAM frequency, add to clock.c!");
+ return -EINVAL;
+ }
+
+ /* pll enter slow-mode */
+ rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
+ DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
+
+ rkclk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg]);
+
+ /* wait for pll lock */
+ while (!(readl(&grf->soc_status[1]) & SOCSTS_DPLL_LOCK))
+ udelay(1);
+
+ /* PLL enter normal-mode */
+ rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
+ DPLL_MODE_NORM << DPLL_MODE_SHIFT);
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)
+{
+ u32 aclk_div;
+ u32 hclk_div;
+ u32 pclk_div;
+
+ /* pll enter slow-mode */
+ rk_clrsetreg(&cru->cru_mode_con,
+ GPLL_MODE_MASK << GPLL_MODE_SHIFT |
+ CPLL_MODE_MASK << CPLL_MODE_SHIFT,
+ GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
+ CPLL_MODE_SLOW << CPLL_MODE_SHIFT);
+
+ /* init pll */
+ rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
+ rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg);
+
+ /* waiting for pll lock */
+ while ((readl(&grf->soc_status[1]) &
+ (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) !=
+ (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
+ udelay(1);
+
+ /*
+ * pd_bus clock pll source selection and
+ * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+ */
+ aclk_div = GPLL_HZ / PD_BUS_ACLK_HZ - 1;
+ assert((aclk_div + 1) * PD_BUS_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+ hclk_div = PD_BUS_ACLK_HZ / PD_BUS_HCLK_HZ - 1;
+ assert((hclk_div + 1) * PD_BUS_HCLK_HZ ==
+ PD_BUS_ACLK_HZ && (hclk_div < 0x4) && (hclk_div != 0x2));
+
+ pclk_div = PD_BUS_ACLK_HZ / PD_BUS_PCLK_HZ - 1;
+ assert((pclk_div + 1) * PD_BUS_PCLK_HZ ==
+ PD_BUS_ACLK_HZ && pclk_div < 0x7);
+
+ rk_clrsetreg(&cru->cru_clksel_con[1],
+ PD_BUS_PCLK_DIV_MASK << PD_BUS_PCLK_DIV_SHIFT |
+ PD_BUS_HCLK_DIV_MASK << PD_BUS_HCLK_DIV_SHIFT |
+ PD_BUS_ACLK_DIV0_MASK << PD_BUS_ACLK_DIV0_SHIFT |
+ PD_BUS_ACLK_DIV1_MASK << PD_BUS_ACLK_DIV1_SHIFT,
+ pclk_div << PD_BUS_PCLK_DIV_SHIFT |
+ hclk_div << PD_BUS_HCLK_DIV_SHIFT |
+ aclk_div << PD_BUS_ACLK_DIV0_SHIFT |
+ 0 << 0);
+
+ /*
+ * peri clock pll source selection and
+ * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+ */
+ aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
+ assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+
+ hclk_div = log2(PERI_ACLK_HZ / PERI_HCLK_HZ);
+ assert((1 << hclk_div) * PERI_HCLK_HZ ==
+ PERI_ACLK_HZ && (hclk_div < 0x4));
+
+ pclk_div = log2(PERI_ACLK_HZ / PERI_PCLK_HZ);
+ assert((1 << pclk_div) * PERI_PCLK_HZ ==
+ PERI_ACLK_HZ && (pclk_div < 0x4));
+
+ rk_clrsetreg(&cru->cru_clksel_con[10],
+ PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT |
+ PERI_HCLK_DIV_MASK << PERI_HCLK_DIV_SHIFT |
+ PERI_ACLK_DIV_MASK << PERI_ACLK_DIV_SHIFT,
+ pclk_div << PERI_PCLK_DIV_SHIFT |
+ hclk_div << PERI_HCLK_DIV_SHIFT |
+ aclk_div << PERI_ACLK_DIV_SHIFT);
+
+ /* PLL enter normal-mode */
+ rk_clrsetreg(&cru->cru_mode_con,
+ GPLL_MODE_MASK << GPLL_MODE_SHIFT |
+ CPLL_MODE_MASK << CPLL_MODE_SHIFT,
+ GPLL_MODE_NORM << GPLL_MODE_SHIFT |
+ GPLL_MODE_NORM << CPLL_MODE_SHIFT);
+}
+#endif
+
+/* Get pll rate by id */
+static uint32_t rkclk_pll_get_rate(struct rk3288_cru *cru,
+ enum rk_clk_id clk_id)
+{
+ uint32_t nr, no, nf;
+ uint32_t con;
+ int pll_id = rk_pll_id(clk_id);
+ struct rk3288_pll *pll = &cru->pll[pll_id];
+ static u8 clk_shift[CLK_COUNT] = {
+ 0xff, APLL_WORK_SHIFT, DPLL_WORK_SHIFT, CPLL_WORK_SHIFT,
+ GPLL_WORK_SHIFT, NPLL_WORK_SHIFT
+ };
+ uint shift;
+
+ con = readl(&cru->cru_mode_con);
+ shift = clk_shift[clk_id];
+ switch ((con >> shift) & APLL_WORK_MASK) {
+ case APLL_WORK_SLOW:
+ return OSC_HZ;
+ case APLL_WORK_NORMAL:
+ /* normal mode */
+ con = readl(&pll->con0);
+ no = ((con >> CLKOD_SHIFT) & CLKOD_MASK) + 1;
+ nr = ((con >> CLKR_SHIFT) & CLKR_MASK) + 1;
+ con = readl(&pll->con1);
+ nf = ((con >> CLKF_SHIFT) & CLKF_MASK) + 1;
+
+ return (24 * nf / (nr * no)) * 1000000;
+ case APLL_WORK_DEEP:
+ default:
+ return 32768;
+ }
+}
+
+static ulong rk3288_clk_get_rate(struct udevice *dev)
+{
+ struct rk3288_clk_plat *plat = dev_get_platdata(dev);
+ struct rk3288_clk_priv *priv = dev_get_priv(dev);
+
+ debug("%s\n", dev->name);
+ return rkclk_pll_get_rate(priv->cru, plat->clk_id);
+}
+
+static ulong rk3288_clk_set_rate(struct udevice *dev, ulong rate)
+{
+ struct rk3288_clk_plat *plat = dev_get_platdata(dev);
+ struct rk3288_clk_priv *priv = dev_get_priv(dev);
+
+ debug("%s\n", dev->name);
+ switch (plat->clk_id) {
+ case CLK_DDR:
+ rkclk_configure_ddr(priv->cru, priv->grf, rate);
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static ulong rockchip_mmc_get_clk(struct rk3288_cru *cru, uint clk_general_rate,
+ enum periph_id periph)
+{
+ uint src_rate;
+ uint div, mux;
+ u32 con;
+
+ switch (periph) {
+ case PERIPH_ID_EMMC:
+ con = readl(&cru->cru_clksel_con[12]);
+ mux = (con >> EMMC_PLL_SHIFT) & EMMC_PLL_MASK;
+ div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK;
+ break;
+ case PERIPH_ID_SDCARD:
+ con = readl(&cru->cru_clksel_con[12]);
+ mux = (con >> MMC0_PLL_SHIFT) & MMC0_PLL_MASK;
+ div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK;
+ break;
+ case PERIPH_ID_SDMMC2:
+ con = readl(&cru->cru_clksel_con[12]);
+ mux = (con >> SDIO0_PLL_SHIFT) & SDIO0_PLL_MASK;
+ div = (con >> SDIO0_DIV_SHIFT) & SDIO0_DIV_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ src_rate = mux == EMMC_PLL_SELECT_24MHZ ? OSC_HZ : clk_general_rate;
+ return DIV_TO_RATE(src_rate, div);
+}
+
+static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint clk_general_rate,
+ enum periph_id periph, uint freq)
+{
+ int src_clk_div;
+ int mux;
+
+ debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate);
+ src_clk_div = RATE_TO_DIV(clk_general_rate, freq);
+
+ if (src_clk_div > 0x3f) {
+ src_clk_div = RATE_TO_DIV(OSC_HZ, freq);
+ mux = EMMC_PLL_SELECT_24MHZ;
+ assert((int)EMMC_PLL_SELECT_24MHZ ==
+ (int)MMC0_PLL_SELECT_24MHZ);
+ } else {
+ mux = EMMC_PLL_SELECT_GENERAL;
+ assert((int)EMMC_PLL_SELECT_GENERAL ==
+ (int)MMC0_PLL_SELECT_GENERAL);
+ }
+ switch (periph) {
+ case PERIPH_ID_EMMC:
+ rk_clrsetreg(&cru->cru_clksel_con[12],
+ EMMC_PLL_MASK << EMMC_PLL_SHIFT |
+ EMMC_DIV_MASK << EMMC_DIV_SHIFT,
+ mux << EMMC_PLL_SHIFT |
+ (src_clk_div - 1) << EMMC_DIV_SHIFT);
+ break;
+ case PERIPH_ID_SDCARD:
+ rk_clrsetreg(&cru->cru_clksel_con[11],
+ MMC0_PLL_MASK << MMC0_PLL_SHIFT |
+ MMC0_DIV_MASK << MMC0_DIV_SHIFT,
+ mux << MMC0_PLL_SHIFT |
+ (src_clk_div - 1) << MMC0_DIV_SHIFT);
+ break;
+ case PERIPH_ID_SDMMC2:
+ rk_clrsetreg(&cru->cru_clksel_con[12],
+ SDIO0_PLL_MASK << SDIO0_PLL_SHIFT |
+ SDIO0_DIV_MASK << SDIO0_DIV_SHIFT,
+ mux << SDIO0_PLL_SHIFT |
+ (src_clk_div - 1) << SDIO0_DIV_SHIFT);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return rockchip_mmc_get_clk(cru, clk_general_rate, periph);
+}
+
+static ulong rockchip_spi_get_clk(struct rk3288_cru *cru, uint clk_general_rate,
+ enum periph_id periph)
+{
+ uint div, mux;
+ u32 con;
+
+ switch (periph) {
+ case PERIPH_ID_SPI0:
+ con = readl(&cru->cru_clksel_con[25]);
+ mux = (con >> SPI0_PLL_SHIFT) & SPI0_PLL_MASK;
+ div = (con >> SPI0_DIV_SHIFT) & SPI0_DIV_MASK;
+ break;
+ case PERIPH_ID_SPI1:
+ con = readl(&cru->cru_clksel_con[25]);
+ mux = (con >> SPI1_PLL_SHIFT) & SPI1_PLL_MASK;
+ div = (con >> SPI1_DIV_SHIFT) & SPI1_DIV_MASK;
+ break;
+ case PERIPH_ID_SPI2:
+ con = readl(&cru->cru_clksel_con[39]);
+ mux = (con >> SPI2_PLL_SHIFT) & SPI2_PLL_MASK;
+ div = (con >> SPI2_DIV_SHIFT) & SPI2_DIV_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+ assert(mux == SPI0_PLL_SELECT_GENERAL);
+
+ return DIV_TO_RATE(clk_general_rate, div);
+}
+
+static ulong rockchip_spi_set_clk(struct rk3288_cru *cru, uint clk_general_rate,
+ enum periph_id periph, uint freq)
+{
+ int src_clk_div;
+
+ debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate);
+ src_clk_div = RATE_TO_DIV(clk_general_rate, freq);
+ switch (periph) {
+ case PERIPH_ID_SPI0:
+ rk_clrsetreg(&cru->cru_clksel_con[25],
+ SPI0_PLL_MASK << SPI0_PLL_SHIFT |
+ SPI0_DIV_MASK << SPI0_DIV_SHIFT,
+ SPI0_PLL_SELECT_GENERAL << SPI0_PLL_SHIFT |
+ src_clk_div << SPI0_DIV_SHIFT);
+ break;
+ case PERIPH_ID_SPI1:
+ rk_clrsetreg(&cru->cru_clksel_con[25],
+ SPI1_PLL_MASK << SPI1_PLL_SHIFT |
+ SPI1_DIV_MASK << SPI1_DIV_SHIFT,
+ SPI1_PLL_SELECT_GENERAL << SPI1_PLL_SHIFT |
+ src_clk_div << SPI1_DIV_SHIFT);
+ break;
+ case PERIPH_ID_SPI2:
+ rk_clrsetreg(&cru->cru_clksel_con[39],
+ SPI2_PLL_MASK << SPI2_PLL_SHIFT |
+ SPI2_DIV_MASK << SPI2_DIV_SHIFT,
+ SPI2_PLL_SELECT_GENERAL << SPI2_PLL_SHIFT |
+ src_clk_div << SPI2_DIV_SHIFT);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return rockchip_spi_get_clk(cru, clk_general_rate, periph);
+}
+
+ulong rk3288_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+{
+ struct rk3288_clk_priv *priv = dev_get_priv(dev);
+ ulong new_rate;
+
+ switch (periph) {
+ case PERIPH_ID_EMMC:
+ case PERIPH_ID_SDCARD:
+ new_rate = rockchip_mmc_set_clk(priv->cru, clk_get_rate(dev),
+ periph, rate);
+ break;
+ case PERIPH_ID_SPI0:
+ case PERIPH_ID_SPI1:
+ case PERIPH_ID_SPI2:
+ new_rate = rockchip_spi_set_clk(priv->cru, clk_get_rate(dev),
+ periph, rate);
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ return new_rate;
+}
+
+static struct clk_ops rk3288_clk_ops = {
+ .get_rate = rk3288_clk_get_rate,
+ .set_rate = rk3288_clk_set_rate,
+ .set_periph_rate = rk3288_set_periph_rate,
+};
+
+static int rk3288_clk_probe(struct udevice *dev)
+{
+ struct rk3288_clk_plat *plat = dev_get_platdata(dev);
+ struct rk3288_clk_priv *priv = dev_get_priv(dev);
+
+ if (plat->clk_id != CLK_OSC) {
+ struct rk3288_clk_priv *parent_priv = dev_get_priv(dev->parent);
+
+ priv->cru = parent_priv->cru;
+ priv->grf = parent_priv->grf;
+ return 0;
+ }
+ priv->cru = (struct rk3288_cru *)dev_get_addr(dev);
+ priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+#ifdef CONFIG_SPL_BUILD
+ rkclk_init(priv->cru, priv->grf);
+#endif
+
+ return 0;
+}
+
+static const char *const clk_name[CLK_COUNT] = {
+ "osc",
+ "apll",
+ "dpll",
+ "cpll",
+ "gpll",
+ "mpll",
+};
+
+static int rk3288_clk_bind(struct udevice *dev)
+{
+ struct rk3288_clk_plat *plat = dev_get_platdata(dev);
+ int pll, ret;
+
+ /* We only need to set up the root clock */
+ if (dev->of_offset == -1) {
+ plat->clk_id = CLK_OSC;
+ return 0;
+ }
+
+ /* Create devices for P main clocks */
+ for (pll = 1; pll < CLK_COUNT; pll++) {
+ struct udevice *child;
+ struct rk3288_clk_plat *cplat;
+
+ debug("%s %s\n", __func__, clk_name[pll]);
+ ret = device_bind_driver(dev, "clk_rk3288", clk_name[pll],
+ &child);
+ if (ret)
+ return ret;
+ cplat = dev_get_platdata(child);
+ cplat->clk_id = pll;
+ }
+
+ /* The reset driver does not have a device node, so bind it here */
+ ret = device_bind_driver(gd->dm_root, "rk3288_reset", "reset", &dev);
+ if (ret)
+ debug("Warning: No RK3288 reset driver: ret=%d\n", ret);
+
+ return 0;
+}
+
+static const struct udevice_id rk3288_clk_ids[] = {
+ { .compatible = "rockchip,rk3288-cru" },
+ { }
+};
+
+U_BOOT_DRIVER(clk_rk3288) = {
+ .name = "clk_rk3288",
+ .id = UCLASS_CLK,
+ .of_match = rk3288_clk_ids,
+ .priv_auto_alloc_size = sizeof(struct rk3288_clk_priv),
+ .platdata_auto_alloc_size = sizeof(struct rk3288_clk_plat),
+ .ops = &rk3288_clk_ops,
+ .bind = rk3288_clk_bind,
+ .probe = rk3288_clk_probe,
+};
--
2.5.0.457.gab17608
More information about the U-Boot
mailing list