[U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver

[Simon Glass]

On 10 August 2015 at 08:03, Marek Vasut <marex at denx.de> wrote:
> On Monday, August 10, 2015 at 04:00:47 PM, Simon Glass wrote:
>> Hi Marek,
>
> Hi Simon,
>
>> On 10 August 2015 at 07:57, Marek Vasut <marex at denx.de> wrote:
>> > On Monday, August 10, 2015 at 03:39:33 PM, Simon Glass wrote:
>> >> Hi Marek,
>> >
>> > Hi Simon,
>> >
>> >> On 2 August 2015 at 17:52, Simon Glass <sjg at chromium.org> wrote:
>> >> > On 2 August 2015 at 17:15, Marek Vasut <marex at denx.de> wrote:
>> >> >> Add Kconfig entries for the simple-bus driver, both for U-Boot
>> >> >> and for SPL. The simple-bus is enabled by default in U-Boot and
>> >> >> disabled by default in SPL to preserve the original behavior.
>> >> >>
>> >> >> Signed-off-by: Marek Vasut <marex at denx.de>
>> >> >> Cc: Simon Glass <sjg at chromium.org>
>> >> >> ---
>> >> >>
>> >> >>  drivers/core/Kconfig  | 15 +++++++++++++++
>> >> >>  drivers/core/Makefile |  5 ++---
>> >> >>  2 files changed, 17 insertions(+), 3 deletions(-)
>> >> >
>> >> > Acked-by: Simon Glass <sjg at chromium.org>
>> >>
>> >> I can't apply this right now as it breaks most tegra boards. We use a
>> >> hack at present where we #undef things in config_uncmd_spl.h and that
>> >> isn't visible to the Makefiles.
>> >>
>> >> Assuming that Tom applies Masahiro's Kconfig improvements for SPL we
>> >> can do it then.
>> >
>> > Agh, OK, thanks for the heads up.
>> >
>> > I hope this makes it into 2015.10, otherwise the SPL support for SoCFPGA
>> > will be completely useless.
>>
>> One way or another we'll figure this out sooner rather than later.
>
> I know :)

Masahiro's series landed so I have applied this to u-boot-dm.

Please check that it works as you expect.

Regards,
Simon