[U-Boot] [PATCH 01/45] arm: Remove balloon3 board
Simon Glass
sjg at chromium.org
Mon Aug 31 03:18:55 CEST 2015
This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/Kconfig | 5 -
arch/arm/include/asm/mach-types.h | 13 --
board/balloon3/Kconfig | 9 --
board/balloon3/MAINTAINERS | 6 -
board/balloon3/Makefile | 9 --
board/balloon3/balloon3.c | 221 ----------------------------------
configs/balloon3_defconfig | 6 -
include/configs/balloon3.h | 242 --------------------------------------
8 files changed, 511 deletions(-)
delete mode 100644 board/balloon3/Kconfig
delete mode 100644 board/balloon3/MAINTAINERS
delete mode 100644 board/balloon3/Makefile
delete mode 100644 board/balloon3/balloon3.c
delete mode 100644 configs/balloon3_defconfig
delete mode 100644 include/configs/balloon3.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a99ae28..0ef52bd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -756,10 +756,6 @@ config TARGET_LS1021ATWR
select CPU_V7
select SUPPORT_SPL
-config TARGET_BALLOON3
- bool "Support balloon3"
- select CPU_PXA
-
config TARGET_H2200
bool "Support h2200"
select CPU_PXA
@@ -894,7 +890,6 @@ source "board/armltd/vexpress/Kconfig"
source "board/armltd/vexpress64/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/bachmann/ot1200/Kconfig"
-source "board/balloon3/Kconfig"
source "board/barco/platinum/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/bluegiga/apx4devkit/Kconfig"
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index e72184b..b1caa16 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -197,7 +197,6 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_SMDK2412 1009
#define MACH_TYPE_SMDK2413 1022
#define MACH_TYPE_AML_M5900 1024
-#define MACH_TYPE_BALLOON3 1029
#define MACH_TYPE_ECBAT91 1072
#define MACH_TYPE_ONEARM 1075
#define MACH_TYPE_SMDK2443 1084
@@ -3332,18 +3331,6 @@ extern unsigned int __machine_arch_type;
# define machine_is_aml_m5900() (0)
#endif
-#ifdef CONFIG_MACH_BALLOON3
-# ifdef machine_arch_type
-# undef machine_arch_type
-# define machine_arch_type __machine_arch_type
-# else
-# define machine_arch_type MACH_TYPE_BALLOON3
-# endif
-# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3)
-#else
-# define machine_is_balloon3() (0)
-#endif
-
#ifdef CONFIG_MACH_ECBAT91
# ifdef machine_arch_type
# undef machine_arch_type
diff --git a/board/balloon3/Kconfig b/board/balloon3/Kconfig
deleted file mode 100644
index 53b7a9a..0000000
--- a/board/balloon3/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_BALLOON3
-
-config SYS_BOARD
- default "balloon3"
-
-config SYS_CONFIG_NAME
- default "balloon3"
-
-endif
diff --git a/board/balloon3/MAINTAINERS b/board/balloon3/MAINTAINERS
deleted file mode 100644
index df9a5bb..0000000
--- a/board/balloon3/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BALLOON3 BOARD
-M: Marek Vasut <marek.vasut at gmail.com>
-S: Maintained
-F: board/balloon3/
-F: include/configs/balloon3.h
-F: configs/balloon3_defconfig
diff --git a/board/balloon3/Makefile b/board/balloon3/Makefile
deleted file mode 100644
index d7fb5e0..0000000
--- a/board/balloon3/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Balloon3 Support
-#
-# Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := balloon3.o
diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c
deleted file mode 100644
index 458d90c..0000000
--- a/board/balloon3/balloon3.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Balloon3 Support
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa.h>
-#include <serial.h>
-#include <asm/io.h>
-#include <spartan3.h>
-#include <command.h>
-#include <usb.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void balloon3_init_fpga(void);
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
- /* We have RAM, disable cache */
- dcache_disable();
- icache_disable();
-
- /* arch number of balloon3 */
- gd->bd->bi_arch_number = MACH_TYPE_BALLOON3;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa0000100;
-
- /* Init the FPGA */
- balloon3_init_fpga();
-
- return 0;
-}
-
-int dram_init(void)
-{
- pxa2xx_dram_init();
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-}
-
-#ifdef CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
- writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
- UHCHR);
-
- writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
-
- while (readl(UHCHR) & UHCHR_FSBIR)
- ;
-
- writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
- writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
-
- /* Clear any OTG Pin Hold */
- if (readl(PSSR) & PSSR_OTGPH)
- writel(readl(PSSR) | PSSR_OTGPH, PSSR);
-
- writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
- writel(readl(UHCRHDA) | 0x100, UHCRHDA);
-
- /* Set port power control mask bits, only 3 ports. */
- writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
-
- /* enable port 2 */
- writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
- UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- return 0;
-}
-
-void usb_board_stop(void)
-{
- writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
- udelay(11);
- writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
- writel(readl(UHCCOMS) | 1, UHCCOMS);
- udelay(10);
-
- writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
-
- return;
-}
-#endif
-
-#if defined(CONFIG_FPGA)
-/* Toggle GPIO103 and GPIO104 -- PROGB and RDnWR */
-int fpga_pgm_fn(int nassert, int nflush, int cookie)
-{
- if (nassert)
- writel(0x80, GPCR3);
- else
- writel(0x80, GPSR3);
- if (nflush)
- writel(0x100, GPCR3);
- else
- writel(0x100, GPSR3);
- return nassert;
-}
-
-/* Check GPIO83 -- INITB */
-int fpga_init_fn(int cookie)
-{
- return !(readl(GPLR2) & 0x80000);
-}
-
-/* Check GPIO84 -- BUSY */
-int fpga_busy_fn(int cookie)
-{
- return !(readl(GPLR2) & 0x100000);
-}
-
-/* Check GPIO111 -- DONE */
-int fpga_done_fn(int cookie)
-{
- return readl(GPLR3) & 0x8000;
-}
-
-/* Configure GPIO104 as GPIO and deassert it */
-int fpga_pre_config_fn(int cookie)
-{
- writel(readl(GAFR3_L) & ~0x30000, GAFR3_L);
- writel(0x100, GPCR3);
- return 0;
-}
-
-/* Configure GPIO104 as nSKTSEL */
-int fpga_post_config_fn(int cookie)
-{
- writel(readl(GAFR3_L) | 0x10000, GAFR3_L);
- return 0;
-}
-
-/* Toggle RDnWR */
-int fpga_wr_fn(int nassert_write, int flush, int cookie)
-{
- udelay(1000);
-
- if (nassert_write)
- writel(0x100, GPCR3);
- else
- writel(0x100, GPSR3);
-
- return nassert_write;
-}
-
-/* Write program to the FPGA */
-int fpga_wdata_fn(uchar data, int flush, int cookie)
-{
- writeb(data, 0x10f00000);
- return 0;
-}
-
-/* Toggle Clock pin -- NO-OP */
-int fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
- return assert_clk;
-}
-
-/* Toggle ChipSelect pin -- NO-OP */
-int fpga_cs_fn(int assert_clk, int flush, int cookie)
-{
- return assert_clk;
-}
-
-xilinx_spartan3_slave_parallel_fns balloon3_fpga_fns = {
- fpga_pre_config_fn,
- fpga_pgm_fn,
- fpga_init_fn,
- NULL, /* err */
- fpga_done_fn,
- fpga_clk_fn,
- fpga_cs_fn,
- fpga_wr_fn,
- NULL, /* rdata */
- fpga_wdata_fn,
- fpga_busy_fn,
- NULL, /* abort */
- fpga_post_config_fn,
-};
-
-xilinx_desc fpga = XILINX_XC3S1000_DESC(slave_parallel,
- (void *)&balloon3_fpga_fns, 0);
-
-/* Initialize the FPGA */
-void balloon3_init_fpga(void)
-{
- fpga_init();
- fpga_add(fpga_xilinx, &fpga);
-}
-#else
-void balloon3_init_fpga(void) {}
-#endif /* CONFIG_FPGA */
diff --git a/configs/balloon3_defconfig b/configs/balloon3_defconfig
deleted file mode 100644
index bf524ce..0000000
--- a/configs/balloon3_defconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_BALLOON3=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
deleted file mode 100644
index 124a766..0000000
--- a/include/configs/balloon3.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Balloon3 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
-#define CONFIG_BALLOON3 1 /* Balloon3 board */
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MALLOC_LEN (128*1024)
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOOTCOMMAND \
- "fpga load 0x0 0x50000 0x62638; " \
- "if usb reset && fatload usb 0 0xa4000000 uImage; then " \
- "bootm 0xa4000000; " \
- "fi; " \
- "bootm 0xd0000;"
-#define CONFIG_BOOTARGS "console=tty0 console=ttyS2,115200"
-#define CONFIG_TIMESTAMP
-#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_TEXT_BASE 0x0
-#define CONFIG_LZMA /* LZMA compression support */
-
-/*
- * Serial Console Configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_STUART 1
-#define CONFIG_CONS_INDEX 2
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Bootloader Components Configuration
- */
-#undef CONFIG_CMD_ENV
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FPGA_LOADMK
-#undef CONFIG_LCD
-
-/*
- * KGDB
- */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#endif
-
-/*
- * HUSH Shell Configuration
- */
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#define CONFIG_SYS_LONGHELP
-#undef CONFIG_SYS_PROMPT
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "$ "
-#else
-#endif
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-/*
- * Clock Configuration
- */
-#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
-
-/*
- * DRAM Map
- */
-#define CONFIG_NR_DRAM_BANKS 3 /* 3 banks of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
-#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
-#define CONFIG_SYS_DRAM_SIZE 0x18000000 /* 384 MB DRAM */
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa1000000
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR \
- (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048)
-
-/*
- * NOR FLASH
- */
-#ifdef CONFIG_CMD_FLASH
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
-#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_ENV_IS_IN_FLASH
-#else
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE 0x000000
-#define CONFIG_SYS_MONITOR_LEN 0x40000
-
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR 0x40000
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL 0x307dc7fd
-#define CONFIG_SYS_GPSR1_VAL 0x03cffa4e
-#define CONFIG_SYS_GPSR2_VAL 0x7131c000
-#define CONFIG_SYS_GPSR3_VAL 0x01e1f3ff
-
-#define CONFIG_SYS_GPCR0_VAL 0x0
-#define CONFIG_SYS_GPCR1_VAL 0x0
-#define CONFIG_SYS_GPCR2_VAL 0x0
-#define CONFIG_SYS_GPCR3_VAL 0x0
-
-#define CONFIG_SYS_GPDR0_VAL 0xc0f98e02
-#define CONFIG_SYS_GPDR1_VAL 0xfcffa8b7
-#define CONFIG_SYS_GPDR2_VAL 0x22e3ffff
-#define CONFIG_SYS_GPDR3_VAL 0x000201fe
-
-#define CONFIG_SYS_GAFR0_L_VAL 0x96c00000
-#define CONFIG_SYS_GAFR0_U_VAL 0xa5e5459b
-#define CONFIG_SYS_GAFR1_L_VAL 0x699b759a
-#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a5aa
-#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x01f9a6aa
-#define CONFIG_SYS_GAFR3_L_VAL 0x54510003
-#define CONFIG_SYS_GAFR3_U_VAL 0x00001599
-
-#define CONFIG_SYS_PSSR_VAL 0x30
-
-/*
- * Clock settings
- */
-#define CONFIG_SYS_CKEN 0xffffffff
-#define CONFIG_SYS_CCCR 0x00000290
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL 0x7ff07ff8
-#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
-#define CONFIG_SYS_MSC2_VAL 0x74a42491
-#define CONFIG_SYS_MDCNFG_VAL 0x89d309d3
-#define CONFIG_SYS_MDREFR_VAL 0x001d8018
-#define CONFIG_SYS_MDMRS_VAL 0x00220022
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00014307
-#define CONFIG_SYS_MCMEM1_VAL 0x00014307
-#define CONFIG_SYS_MCATT0_VAL 0x0001c787
-#define CONFIG_SYS_MCATT1_VAL 0x0001c787
-#define CONFIG_SYS_MCIO0_VAL 0x0001430f
-#define CONFIG_SYS_MCIO1_VAL 0x0001430f
-
-/*
- * LCD
- */
-#ifdef CONFIG_LCD
-#define CONFIG_BALLOON3LCD
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_CMD_BMP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
-#endif
-
-/*
- * USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "balloon3"
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#endif
-
-/*
- * FPGA
- */
-#ifdef CONFIG_CMD_FPGA
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_SPARTAN3
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_SYS_FPGA_WAIT 1000
-#define CONFIG_MAX_FPGA_DEVICES 1
-#endif
-
-#endif /* __CONFIG_H */
--
2.5.0.457.gab17608
More information about the U-Boot
mailing list