[U-Boot] [PATCH 0/5] ARM: keystone2: Build images by default

Lokesh Vutla lokeshvutla at ti.com
Mon Aug 17 16:24:47 CEST 2015


Currently we need to build each image(u-boot.uart, u-boot-nand.gph,
u-boot-spi.gph) separately for all keystone2 platforms.

This series does the following:
- Move SP to end of u-boot section so that u-boot.bin can be used as
  build target for uart boot.
- Renames u-boot-nand.gph to MLO so that the same image can be used
  for NAND and SD boots.
- Includes these images in config.mk so that these images are built
  automatically upon calling make.

Now the updated build targets are as below:
Uart:	u-boot.bin
SPI:	u-boot-spi.gph
NAND:	MLO
SD:	MLO

Testing:

k2hk-evm:
---------
Uart boot: http://pastebin.ubuntu.com/12106278/
SPI boot: http://pastebin.ubuntu.com/12106315/
NAND boot: http://pastebin.ubuntu.com/12106368/

Lokesh Vutla (4):
  ARM: keystone2: configs: Move SP to end of u-boot section
  ARM: keystone2: Rename u-boot-nand.gph to MLO
  ARM: keystone2: Build MLO by default
  ARM: keystone2: Update README

Nishanth Menon (1):
  ARM: keystone2: move the custom build rules out to keystone specific
    makefile

 Makefile                             | 16 ----------------
 arch/arm/mach-keystone/config.mk     | 28 ++++++++++++++++++++++++++++
 board/ti/ks2_evm/README              | 32 ++++++++++++++++++--------------
 include/configs/ti_armv7_keystone2.h |  4 ++--
 4 files changed, 48 insertions(+), 32 deletions(-)
 create mode 100644 arch/arm/mach-keystone/config.mk

-- 
2.1.4



More information about the U-Boot mailing list