[U-Boot] [U-Boot, v2] omap-common: SYS_BOOT fallback logic correction and support for more devices

[Tom Rini]

On Thu, Aug 27, 2015 at 10:46:09AM +0200, Paul Kocialkowski wrote:

> The SYS_BOOT-based fallback shouldn't only check for one of the conditions of
> use and then let the switch/case handle each boot device without enforcing the
> conditions for each type of boot device again.
> 
> For instance, this behaviour would trigger the fallback for UART when
> BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should
> be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not
> CONFIG_SPL_USB_SUPPORT.
> Separating the logic for USB and UART solves this.
> 
> In addition, this adds support for more peripheral devices (USBETH and CPGMAC)
> to the fallback mechanism. Note that the USBETH boot device should always be
> different from the USB boot device (each should match a different bootrom
> handoff case).
> 
> Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
> Acked-by: Hannes Schmelzer <oe5hpm at oevsv.at>
> Tested-by: Hannes Schmelzer <oe5hpm at oevsv.at>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150828/8d404ed8/attachment.sig>