[U-Boot] [PATCH v2] omap-common: SYS_BOOT fallback logic correction and support for more devices
Hannes Schmelzer
hannes at schmelzer.or.at
Thu Aug 27 11:28:06 CEST 2015
On 2015-08-27 10:46, Paul Kocialkowski wrote:
> The SYS_BOOT-based fallback shouldn't only check for one of the conditions of
> use and then let the switch/case handle each boot device without enforcing the
> conditions for each type of boot device again.
>
> For instance, this behaviour would trigger the fallback for UART when
> BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should
> be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not
> CONFIG_SPL_USB_SUPPORT.
> Separating the logic for USB and UART solves this.
>
> In addition, this adds support for more peripheral devices (USBETH and CPGMAC)
> to the fallback mechanism. Note that the USBETH boot device should always be
> different from the USB boot device (each should match a different bootrom
> handoff case).
>
> Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
> ---
Very well. Everything now works fine.
best regards,
Hannes
Acked-by: Hannes Schmelzer <oe5hpm at oevsv.at>
Tested-by: Hannes Schmelzer <oe5hpm at oevsv.at>
More information about the U-Boot
mailing list