[U-Boot] [PATCH 4/8] x86: fsp: Enlarge the size of malloc() pool before relocation

Bin Meng bmeng.cn at gmail.com
Sat Aug 15 09:07:46 CEST 2015


After fsp_init() returns, the stack has already been switched to a
place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR.
Enlarge the size of malloc() pool before relocation since we have
plenty of memory now.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 arch/x86/Kconfig              | 7 +++++++
 arch/x86/cpu/start.S          | 8 ++++++++
 arch/x86/lib/fsp/fsp_common.c | 6 +++++-
 3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 065bbe4..687208f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -232,6 +232,13 @@ config FSP_TEMP_RAM_ADDR
 	  Stack top address which is used in FspInit after DRAM is ready and
 	  CAR is disabled.
 
+config FSP_SYS_MALLOC_F_LEN
+	hex
+	depends on HAVE_FSP
+	default 0x100000
+	help
+	  Additional size of malloc() pool before relocation.
+
 config SMP
 	bool "Enable Symmetric Multiprocessing"
 	default n
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index e94ddc4..e2b5ef4 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -141,6 +141,14 @@ car_init_ret:
 	jz	skip_hob
 	movl	%esi, GD_HOB_LIST(%edx)
 
+	/*
+	 * After fsp_init() returns, the stack has already been switched to a
+	 * place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR.
+	 * Enlarge the size of malloc() pool before relocation since we have
+	 * plenty of memory now.
+	 */
+	subl	$CONFIG_FSP_SYS_MALLOC_F_LEN, %esp
+	movl	%esp, GD_MALLOC_BASE(%edx)
 skip_hob:
 #else
 	/* Store table pointer */
diff --git a/arch/x86/lib/fsp/fsp_common.c b/arch/x86/lib/fsp/fsp_common.c
index 6f72c6d..9c316d4 100644
--- a/arch/x86/lib/fsp/fsp_common.c
+++ b/arch/x86/lib/fsp/fsp_common.c
@@ -56,8 +56,12 @@ void board_final_cleanup(void)
 
 int x86_fsp_init(void)
 {
-	if (!gd->arch.hob_list)
+	if (!gd->arch.hob_list) {
 		fsp_init(CONFIG_FSP_TEMP_RAM_ADDR, BOOT_FULL_CONFIG, NULL);
+	} else {
+		/* We should adjust gd->malloc_limit here */
+		gd->malloc_limit += CONFIG_FSP_SYS_MALLOC_F_LEN;
+	}
 
 	return 0;
 }
-- 
1.8.2.1



More information about the U-Boot mailing list