[U-Boot] [PATCH 04/11] x86: Remove calculate_relocation_address()

[Bin Meng]

Now that we have generic routine to calculate relocation address,
remove the x86 specific one which is now only used by coreboot.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 arch/x86/cpu/coreboot/sdram.c       |  9 +------
 arch/x86/include/asm/init_helpers.h |  2 --
 arch/x86/lib/init_helpers.c         | 51 +------------------------------------
 3 files changed, 2 insertions(+), 60 deletions(-)

diff --git a/arch/x86/cpu/coreboot/sdram.c b/arch/x86/cpu/coreboot/sdram.c
index 2722886..ae5c893 100644
--- a/arch/x86/cpu/coreboot/sdram.c
+++ b/arch/x86/cpu/coreboot/sdram.c
@@ -7,14 +7,7 @@
  */
 
 #include <common.h>
-#include <malloc.h>
 #include <asm/e820.h>
-#include <asm/u-boot-x86.h>
-#include <asm/global_data.h>
-#include <asm/init_helpers.h>
-#include <asm/processor.h>
-#include <asm/sections.h>
-#include <asm/zimage.h>
 #include <asm/arch/sysinfo.h>
 #include <asm/arch/tables.h>
 
@@ -109,7 +102,7 @@ int dram_init(void)
 	if (ram_size == 0)
 		return -1;
 
-	return calculate_relocation_address();
+	return 0;
 }
 
 void dram_init_banksize(void)
diff --git a/arch/x86/include/asm/init_helpers.h b/arch/x86/include/asm/init_helpers.h
index 8cbe08e..c689a63 100644
--- a/arch/x86/include/asm/init_helpers.h
+++ b/arch/x86/include/asm/init_helpers.h
@@ -8,8 +8,6 @@
 #ifndef _INIT_HELPERS_H_
 #define _INIT_HELPERS_H_
 
-int calculate_relocation_address(void);
-
 int init_cache_f_r(void);
 int init_bd_struct_r(void);
 int init_func_spi(void);
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index 4fd47fc..82fd5c3 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -4,12 +4,10 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
+
 #include <common.h>
-#include <fdtdec.h>
-#include <spi.h>
 #include <asm/errno.h>
 #include <asm/mtrr.h>
-#include <asm/sections.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -19,53 +17,6 @@ __weak ulong board_get_usable_ram_top(ulong total_size)
 	return gd->ram_size;
 }
 
-int calculate_relocation_address(void)
-{
-	const ulong uboot_size = (uintptr_t)&__bss_end -
-			(uintptr_t)&__text_start;
-	ulong total_size;
-	ulong dest_addr;
-	ulong fdt_size = 0;
-
-#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL)
-	if (gd->fdt_blob)
-		fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);
-#endif
-	total_size = ALIGN(uboot_size, 1 << 12) + CONFIG_SYS_MALLOC_LEN +
-		CONFIG_SYS_STACK_SIZE + fdt_size;
-
-	dest_addr = board_get_usable_ram_top(total_size);
-	/*
-	 * NOTE: All destination address are rounded down to 16-byte
-	 *       boundary to satisfy various worst-case alignment
-	 *       requirements
-	 */
-	dest_addr &= ~15;
-
-#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL)
-	/*
-	 * If the device tree is sitting immediate above our image then we
-	 * must relocate it. If it is embedded in the data section, then it
-	 * will be relocated with other data.
-	 */
-	if (gd->fdt_blob) {
-		dest_addr -= fdt_size;
-		gd->new_fdt = (void *)dest_addr;
-		dest_addr &= ~15;
-	}
-#endif
-	/* U-Boot is below the FDT */
-	dest_addr -= uboot_size;
-	dest_addr &= ~((1 << 12) - 1);
-	gd->relocaddr = dest_addr;
-	gd->reloc_off = dest_addr - (uintptr_t)&__text_start;
-
-	/* Stack is at the bottom, so it can grow down */
-	gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN;
-
-	return 0;
-}
-
 int init_cache_f_r(void)
 {
 #if defined(CONFIG_X86_RESET_VECTOR) & !defined(CONFIG_HAVE_FSP)
-- 
1.8.2.1