[U-Boot] [PATCH v2 5/7] sf: Make flash->flags use for generic usage
Jagan Teki
jteki at openedev.com
Tue Aug 18 10:31:01 CEST 2015
Hi Bin,
On 18 August 2015 at 13:23, Bin Meng <bmeng.cn at gmail.com> wrote:
> Hi Jagan,
>
> On Mon, Aug 17, 2015 at 6:32 PM, Jagan Teki <jteki at openedev.com> wrote:
>> Use the flash->flags for generic usage, not only for dm-spi-flash,
>> this will be used for future flag additions.
>>
>> Signed-off-by: Jagan Teki <jteki at openedev.com>
>> Cc: Bin Meng <bmeng.cn at gmail.com>
>> ---
>> drivers/mtd/spi/sf_internal.h | 4 ++++
>> drivers/mtd/spi/sf_probe.c | 6 ++----
>> include/spi_flash.h | 4 ++--
>> 3 files changed, 8 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
>> index 9fb5557..e97c716 100644
>> --- a/drivers/mtd/spi/sf_internal.h
>> +++ b/drivers/mtd/spi/sf_internal.h
>> @@ -47,6 +47,10 @@ enum {
>>
>> #define SST_WR (SST_BP | SST_WP)
>>
>> +enum spi_nor_option_flags {
>> + SNOR_F_SST_WR = (1 << 0),
>> +};
>> +
>> #define SPI_FLASH_3B_ADDR_LEN 3
>> #define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
>> #define SPI_FLASH_16MB_BOUN 0x1000000
>> diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
>> index 0483bed..1de2bbb 100644
>> --- a/drivers/mtd/spi/sf_probe.c
>> +++ b/drivers/mtd/spi/sf_probe.c
>> @@ -164,15 +164,13 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
>> flash->name = params->name;
>> flash->memory_map = spi->memory_map;
>> flash->dual_flash = flash->spi->option;
>> -#ifdef CONFIG_DM_SPI_FLASH
>> - flash->flags = params->flags;
>> -#endif
>>
>> /* Assign spi_flash ops */
>> #ifndef CONFIG_DM_SPI_FLASH
>> flash->write = spi_flash_cmd_write_ops;
>> #if defined(CONFIG_SPI_FLASH_SST)
>> if (params->flags & SST_WR) {
>> + flash->flags |= SNOR_F_SST_WR;
>> if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
>> flash->write = sst_write_bp;
>> else
>> @@ -467,7 +465,7 @@ int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len,
>> struct spi_flash *flash = dev_get_uclass_priv(dev);
>>
>> #if defined(CONFIG_SPI_FLASH_SST)
>> - if (flash->flags & SST_WR) {
>> + if (flash->flags & SNOR_F_SST_WR) {
>> if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
>> return sst_write_bp(flash, offset, len, buf);
>> else
>> diff --git a/include/spi_flash.h b/include/spi_flash.h
>> index 3b2d555..8d85468 100644
>> --- a/include/spi_flash.h
>> +++ b/include/spi_flash.h
>> @@ -38,10 +38,10 @@ struct spi_slave;
>> *
>> * @spi: SPI slave
>> * @dev: SPI flash device
>> - * @flags: Indication of spi flash flags
>> * @name: Name of SPI flash
>> * @dual_flash: Indicates dual flash memories - dual stacked, parallel
>> * @shift: Flash shift useful in dual parallel
>> + * @flags: Indication of spi flash flags
>> * @size: Total flash size
>> * @page_size: Write (page) size
>> * @sector_size: Sector size
>> @@ -67,11 +67,11 @@ struct spi_flash {
>> struct spi_slave *spi;
>> #ifdef CONFIG_DM_SPI_FLASH
>> struct udevice *dev;
>> - u16 flags;
>> #endif
>> const char *name;
>> u8 dual_flash;
>> u8 shift;
>> + u16 flags;
>>
>> u32 size;
>> u32 page_size;
>> --
>
> This is the commit that breaks the SF flash on Intel Crown Bay. I've
> tested like this:
>
> Power-on the board, type "setenv testcase whatever" and "saveenv", do
> a "reset", and check if the "testcase" variable is there.
>
> Unfortunately with this commit, sometimes my board does not even boot
> after "reset". I checked that if must be the SF driver writes the
> wrong places into the flash which corrupts the codes.
Sorry, I couldn't find any wrong in this commit.
We assigned directly params (SST_WR, for SST flash's) flags to flash flags
and check the param flags in dm-spi-write calls. So instead of that this commit
assigns local macro to flash flags if SST_WR and this will check in dm-spi-write
calls instead of param flags.
Could you please provide any command error info say sf probe, sf erase/write
thanks!
--
Jagan | openedev.
More information about the U-Boot
mailing list