[U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address

[vikas]

Hi Marek,

On 08/13/2015 06:04 PM, Marek Vasut wrote:
> On Friday, August 14, 2015 at 02:37:53 AM, vikas wrote:
>> Hi,
>>
>> On 08/13/2015 03:48 PM, Marek Vasut wrote:
>>> On Thursday, August 13, 2015 at 11:36:31 PM, vikas wrote:
>>>> Hi Marek,
>>>
>>> Hi!
>>>
>>>> On 08/13/2015 09:42 AM, vikasm wrote:
>>>>> Hi Marek,
>>>>>
>>>>> On 08/12/2015 07:15 PM, Marek Vasut wrote:
>>>>>> On Thursday, July 16, 2015 at 04:27:33 AM, Vikas Manocha wrote:
>>>>>>> This patch is to separate the base trigger from the read/write
>>>>>>> transfer start addresses.
>>>>>>
>>>>>> This patch breaks the QSPI support on SoCFPGA.
>>>>>
>>>>> ok, can you please try to debug the issue. Logically this patch looks
>>>>> good to me unless there is something specific to socfpga.
>>>>
>>>> One quick check, can you test if it works on reverting the trigger base
>>>> in arch/arm/dts/socfpga.dtsi from <0x00000000 0x0010> to <0xffa00000
>>>> 0x1000>.
>>>
>>> Can you please spin V3 of the patchset first, one which omits the buggy
>>> bits, so I can test it on a more final form of the patches ? Please keep
>>> me on CC, I'll test it then.
>>
>> Once i add sram level test patches, i would not be able to test it on my
>> platform. This particular issue is pending for long time. I suggest to
>> debug (at least with above mentioned quick test) this particular
>> issue/patch with current version v2. There is only minor change (format
>> string) in this patch for v3.
> 
> That's fine, just send the V3 as RFT and I'll check it.

If this patch is not debugged, there is no major significance of this patchset.
I would appreciate if you do some test with current v2.

Rgds,
Vikas

> 
> Best regards,
> Marek Vasut
> .
>