[U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address
Marek Vasut
marex at denx.de
Fri Aug 14 03:56:58 CEST 2015
On Friday, August 14, 2015 at 03:39:22 AM, vikas wrote:
> Hi Marek,
>
> On 08/13/2015 06:04 PM, Marek Vasut wrote:
> > On Friday, August 14, 2015 at 02:37:53 AM, vikas wrote:
> >> Hi,
> >>
> >> On 08/13/2015 03:48 PM, Marek Vasut wrote:
> >>> On Thursday, August 13, 2015 at 11:36:31 PM, vikas wrote:
> >>>> Hi Marek,
> >>>
> >>> Hi!
> >>>
> >>>> On 08/13/2015 09:42 AM, vikasm wrote:
> >>>>> Hi Marek,
> >>>>>
> >>>>> On 08/12/2015 07:15 PM, Marek Vasut wrote:
> >>>>>> On Thursday, July 16, 2015 at 04:27:33 AM, Vikas Manocha wrote:
> >>>>>>> This patch is to separate the base trigger from the read/write
> >>>>>>> transfer start addresses.
> >>>>>>
> >>>>>> This patch breaks the QSPI support on SoCFPGA.
> >>>>>
> >>>>> ok, can you please try to debug the issue. Logically this patch looks
> >>>>> good to me unless there is something specific to socfpga.
> >>>>
> >>>> One quick check, can you test if it works on reverting the trigger
> >>>> base in arch/arm/dts/socfpga.dtsi from <0x00000000 0x0010> to
> >>>> <0xffa00000 0x1000>.
> >>>
> >>> Can you please spin V3 of the patchset first, one which omits the buggy
> >>> bits, so I can test it on a more final form of the patches ? Please
> >>> keep me on CC, I'll test it then.
> >>
> >> Once i add sram level test patches, i would not be able to test it on my
> >> platform. This particular issue is pending for long time. I suggest to
> >> debug (at least with above mentioned quick test) this particular
> >> issue/patch with current version v2. There is only minor change (format
> >> string) in this patch for v3.
> >
> > That's fine, just send the V3 as RFT and I'll check it.
>
> If this patch is not debugged, there is no major significance of this
> patchset. I would appreciate if you do some test with current v2.
I stop here for today and will get back to this in a few days again.
Please send V3 until then, I don't want to dig in old/broken code.
Best regards,
Marek Vasut
More information about the U-Boot
mailing list