[U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board

York Sun yorksun at freescale.com
Tue Aug 18 21:04:48 CEST 2015



On 08/17/2015 02:42 AM, Yuantian.Tang at freescale.com wrote:
> From: Tang Yuantian <Yuantian.Tang at freescale.com>
> 
> Freescale ARM-based Layerscape LS102xA contain a SATA controller
> which comply with the serial ATA 3.0 specification and the
> AHCI 1.3 specification.
> This patch adds SATA feature on ls1021aqds and ls1021atwr boards.
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang at freescale.com>
> ---
> v2:
> 	- rebase to latest git tree
> 	- use micro SATA_ECC_REG_ADDR instead of hard coding 
> 
>  arch/arm/include/asm/arch-ls102xa/config.h        | 15 ++++++
>  arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 24 +++++++++
>  board/freescale/ls1021aqds/ls1021aqds.c           | 61 +++++++++++++++++++++++
>  board/freescale/ls1021atwr/ls1021atwr.c           | 61 +++++++++++++++++++++++
>  4 files changed, 161 insertions(+)
> 
> diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
> index c55cdef..a4a5d84 100644
> --- a/arch/arm/include/asm/arch-ls102xa/config.h
> +++ b/arch/arm/include/asm/arch-ls102xa/config.h
> @@ -79,6 +79,21 @@
>  #define CONFIG_SYS_PCIE2_PHYS_ADDR		(CONFIG_SYS_PCIE2_PHYS_BASE + \
>  						 CONFIG_SYS_PCIE2_VIRT_ADDR)
>  
> +/* SATA */
> +#define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
> +#define CONFIG_BOARD_LATE_INIT
> +#define CONFIG_CMD_SCSI
> +#define CONFIG_LIBATA
> +#define CONFIG_SCSI_AHCI
> +#define CONFIG_SCSI_AHCI_PLAT
> +#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
> +#define CONFIG_SYS_SCSI_MAX_LUN		1
> +#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> +						CONFIG_SYS_SCSI_MAX_LUN)
> +#define CONFIG_CMD_FAT
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_SYS_FSL_ERRATUM_A008407
> +
>  #ifdef CONFIG_DDR_SPD
>  #define CONFIG_SYS_FSL_DDR_BE
>  #define CONFIG_VERY_BIG_RAM
> diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> index d34044a..211fe1d 100644
> --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> @@ -397,4 +397,28 @@ struct ccsr_cci400 {
>  	u8 res_e004[0x10000 - 0xe004];
>  };
>  
> +/* AHCI (sata) register map */
> +struct ccsr_ahci {
> +	u32 res1[0xa4/4];	/* 0x0 - 0xa4 */
> +	u32 pcfg;	/* port config */
> +	u32 ppcfg;	/* port phy1 config */
> +	u32 pp2c;	/* port phy2 config */
> +	u32 pp3c;	/* port phy3 config */
> +	u32 pp4c;	/* port phy4 config */
> +	u32 pp5c;	/* port phy5 config */
> +	u32 paxic;	/* port AXI config */
> +	u32 axicc;	/* AXI cache control */
> +	u32 axipc;	/* AXI PROT control */
> +	u32 ptc;	/* port Trans Config */
> +	u32 pts;	/* port Trans Status */
> +	u32 plc;	/* port link config */
> +	u32 plc1;	/* port link config1 */
> +	u32 plc2;	/* port link config2 */
> +	u32 pls;	/* port link status */
> +	u32 pls1;	/* port link status1 */
> +	u32 pcmdc;	/* port CMD config */
> +	u32 ppcs;	/* port phy control status */
> +	u32 pberr;	/* port 0/1 BIST error */
> +	u32 cmds;	/* port 0/1 CMD status error */
> +};
>  #endif	/* __ASM_ARCH_LS102XA_IMMAP_H_ */
> diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
> index d6ef6ba..1b26ed3 100644
> --- a/board/freescale/ls1021aqds/ls1021aqds.c
> +++ b/board/freescale/ls1021aqds/ls1021aqds.c
> @@ -18,6 +18,8 @@
>  #include <fsl_ifc.h>
>  #include <fsl_sec.h>
>  #include <spl.h>
> +#include <ahci.h>
> +#include <scsi.h>
>  
>  #include "../common/sleep.h"
>  #include "../common/qixis.h"
> @@ -54,6 +56,52 @@ enum {
>  	GE1_CLK125,
>  };
>  
> +static void ls1021a_sata_init(void)
> +{
> +	struct ccsr_ahci __iomem *ccsr_ahci = (void *)AHCI_BASE_ADDR;
> +
> +#ifdef CONFIG_SYS_FSL_ERRATUM_A008407
> +#define SATA_ECC_REG_ADDR	0x20220520
> +	unsigned int __iomem *ecc_reg = (void *)SATA_ECC_REG_ADDR;
> +#endif
> +
> +	out_le32(&ccsr_ahci->ppcfg, 0xa003fffe);
> +	out_le32(&ccsr_ahci->pp2c, 0x28183411);
> +	out_le32(&ccsr_ahci->pp3c, 0x0e081004);
> +	out_le32(&ccsr_ahci->pp4c, 0x00480811);
> +	out_le32(&ccsr_ahci->pp5c, 0x192c96a4);
> +	out_le32(&ccsr_ahci->ptc, 0x08000025);

What are these numbers?

> +
> +#ifdef CONFIG_SYS_FSL_ERRATUM_A008407
> +	out_le32(ecc_reg, 0x00020000);
> +#endif

Same here.

> +}
> +
> +#ifdef CONFIG_SCSI_AHCI_PLAT
> +static int ls1021a_sata_start(void)
> +{
> +	struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_FSL_GUTS_ADDR;
> +	u32 cfg;
> +	int rc = -1;
> +
> +	cfg = in_be32(&gur->rcwsr[4]) & RCWSR4_SRDS1_PRTCL_MASK;
> +	cfg >>= RCWSR4_SRDS1_PRTCL_SHIFT;
> +
> +	if (cfg != 0x30 && cfg != 0x70) {
> +		printf("SATA disabled: serdes protocol doesn't support\n");
> +		return rc;
> +	}
> +
> +	rc = ahci_init((void __iomem *)AHCI_BASE_ADDR);
> +	if (rc)
> +		return rc;
> +
> +	scsi_scan(0);
> +
> +	return 0;
> +}
> +#endif
> +
>  #ifdef CONFIG_LS102XA_NS_ACCESS
>  static struct csu_ns_dev ns_dev[] = {
>  	{ CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
> @@ -327,6 +375,8 @@ int board_early_init_f(void)
>  		fsl_dp_disable_console();
>  #endif
>  
> +	ls1021a_sata_init();

Is it OK to run this init regardless SerDes protocol?

> +
>  	return 0;
>  }
>  
> @@ -388,6 +438,17 @@ void board_init_f(ulong dummy)
>  }
>  #endif
>  
> +#ifdef CONFIG_BOARD_LATE_INIT
> +int board_late_init(void)
> +{
> +#ifdef CONFIG_SCSI_AHCI_PLAT
> +	ls1021a_sata_start();
> +#endif
> +
> +	return 0;
> +}
> +#endif
> +
>  void config_etseccm_source(int etsec_gtx_125_mux)
>  {
>  	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
> diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
> index b7458a9..6a964c3 100644
> --- a/board/freescale/ls1021atwr/ls1021atwr.c
> +++ b/board/freescale/ls1021atwr/ls1021atwr.c
> @@ -22,6 +22,8 @@
>  #include <tsec.h>
>  #include <fsl_sec.h>
>  #include <spl.h>
> +#include <ahci.h>
> +#include <scsi.h>
>  #include "../common/sleep.h"
>  #ifdef CONFIG_U_QE
>  #include "../../../drivers/qe/qe.h"
> @@ -173,6 +175,52 @@ struct cpld_data {
>  	u8 rev2;		/* Reserved */
>  };
>  
> +static void ls1021a_sata_init(void)
> +{
> +	struct ccsr_ahci __iomem *ccsr_ahci = (void *)AHCI_BASE_ADDR;
> +
> +#ifdef CONFIG_SYS_FSL_ERRATUM_A008407

Looks like ERRATUM A008407 is a SoC erratum. The workaround shouldn't be in
board file.

York


More information about the U-Boot mailing list