[U-Boot] [PATCH v1 0/2] Rename DDR4 target names

[Priyanka Jain]

Hello York,

For T1040QDS, we can change the name.
For T1024 also, I think there should not be any issue. Shengzhou please confirm.


Regards
Priyanka

From: Sun York-R58495
Sent: Monday, August 10, 2015 8:18 PM
To: Jain Priyanka-B32167; Sun York-R58495; U-Boot Mailing List
Cc: Wood Scott-B07421; Stephen Warren; Masahiro Yamada; Tom Rini; Joe Hershberger; Aggrwal Poonam-B10812; Liu Shengzhou-B36685
Subject: RE: [PATCH v1 0/2] Rename DDR4 target names

Priyanka,

If the boards have been officially named T1040D4RDB/T1042D4RDB, we can keep the names. How about QDS and T1024 boards?

York

-------- Original message --------
From: Jain Priyanka-B32167
Date:08/09/2015 22:01 (GMT-08:00)
To: Sun York-R58495 , U-Boot Mailing List
Cc: Wood Scott-B07421 , Sun York-R58495 , Stephen Warren , Masahiro Yamada , Tom Rini , Joe Hershberger , Aggrwal Poonam-B10812 , Liu Shengzhou-B36685
Subject: RE: [PATCH v1 0/2] Rename DDR4 target names

Hello York,

T1040D4RDB/T1042D4RDB boards have other difference as well apart from DDR4 w.r.t old T1040RDB/T1042RDB.
T1040D4RDB/T1042D4RDB is the naming convection that has been used to distinguished new T1040RDB/T1042RDB board with DDR4 memory, new serdes protocol support , new muxes , etc.

If the only difference would have been DDR4, then we could have renamed to T1040RDB_DDR4 board.

But at this moment, the name T1040D4RDB is printed on the new boards and has been used in all board, SDK related documentation for these new boards.
I think renaming them to T1040RDB_DDR4 will create confusion.

Regards
Priyanka


> -----Original Message-----
> From: York Sun [mailto:yorksun at freescale.com]
> Sent: Friday, August 07, 2015 5:00 AM
> To: U-Boot Mailing List
> Cc: Wood Scott-B07421; Sun York-R58495; Stephen Warren; Masahiro
> Yamada; Tom Rini; Joe Hershberger; Aggrwal Poonam-B10812; Jain Priyanka-
> B32167; Liu Shengzhou-B36685
> Subject: [PATCH v1 0/2] Rename DDR4 target names
>
> Freescale T1 series supports both DDR3 and DDR4. We have boards for each
> type of memory. To make the naming consistence and easy to understand,
> use _DDR4 instead of _D4 for the names. The same applies to Layerscape
> LS1 series, which already has _ddr4 in the name. LS2 series doesn't support
> DDR3, so the emulator target for DDR3 is dropped.
>
>
>
> York Sun (2):
>   armv8/ls2085a_emu: Drop DDR3 emulation target
>   powerpc/defconfig: Rename defconfig file for DDR4 targets
>
>  board/freescale/ls2085a/MAINTAINERS                |    1 -
>  board/freescale/t102xqds/MAINTAINERS               |    4 ++--
>  board/freescale/t1040qds/MAINTAINERS               |    2 +-
>  board/freescale/t104xrdb/MAINTAINERS               |   20 ++++++++++----------
>  ...fconfig => T1024QDS_DDR4_SECURE_BOOT_defconfig} |    0
>  ...040QDS_D4_defconfig => T1040QDS_DDR4_defconfig} |    0
>  ...NAND_defconfig => T1040RDB_DDR4_NAND_defconfig} |    0
>  ...RD_defconfig => T1040RDB_DDR4_SDCARD_defconfig} |    0
>  ...fconfig => T1040RDB_DDR4_SECURE_BOOT_defconfig} |    0
>  ..._defconfig => T1040RDB_DDR4_SPIFLASH_defconfig} |    0
>  ...1040D4RDB_defconfig => T1040RDB_DDR4_defconfig} |    0
>  ...NAND_defconfig => T1042RDB_DDR4_NAND_defconfig} |    0
>  ...RD_defconfig => T1042RDB_DDR4_SDCARD_defconfig} |    0
>  ...fconfig => T1042RDB_DDR4_SECURE_BOOT_defconfig} |    0
>  ..._defconfig => T1042RDB_DDR4_SPIFLASH_defconfig} |    0
>  ...1042D4RDB_defconfig => T1042RDB_DDR4_defconfig} |    0
>  configs/ls2085a_emu_D4_defconfig                   |   14 --------------
>  configs/ls2085a_emu_defconfig                      |    2 +-
>  18 files changed, 14 insertions(+), 29 deletions(-)  rename
> configs/{T1024QDS_D4_SECURE_BOOT_defconfig =>
> T1024QDS_DDR4_SECURE_BOOT_defconfig} (100%)  rename
> configs/{T1040QDS_D4_defconfig => T1040QDS_DDR4_defconfig} (100%)
> rename configs/{T1040D4RDB_NAND_defconfig =>
> T1040RDB_DDR4_NAND_defconfig} (100%)  rename
> configs/{T1040D4RDB_SDCARD_defconfig =>
> T1040RDB_DDR4_SDCARD_defconfig} (100%)  rename
> configs/{T1040D4RDB_SECURE_BOOT_defconfig =>
> T1040RDB_DDR4_SECURE_BOOT_defconfig} (100%)  rename
> configs/{T1040D4RDB_SPIFLASH_defconfig =>
> T1040RDB_DDR4_SPIFLASH_defconfig} (100%)  rename
> configs/{T1040D4RDB_defconfig => T1040RDB_DDR4_defconfig} (100%)
> rename configs/{T1042D4RDB_NAND_defconfig =>
> T1042RDB_DDR4_NAND_defconfig} (100%)  rename
> configs/{T1042D4RDB_SDCARD_defconfig =>
> T1042RDB_DDR4_SDCARD_defconfig} (100%)  rename
> configs/{T1042D4RDB_SECURE_BOOT_defconfig =>
> T1042RDB_DDR4_SECURE_BOOT_defconfig} (100%)  rename
> configs/{T1042D4RDB_SPIFLASH_defconfig =>
> T1042RDB_DDR4_SPIFLASH_defconfig} (100%)  rename
> configs/{T1042D4RDB_defconfig => T1042RDB_DDR4_defconfig} (100%)
> delete mode 100644 configs/ls2085a_emu_D4_defconfig
>
> --
> 1.7.9.5