[U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL

[Peng Fan]

The MIB RAM and FIFO receive start register does not exist on
i.MX6UL. Accessing these register will cause enet not work well.

Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
Signed-off-by: Fugang Duan <B38611 at freescale.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
---
 drivers/net/fec_mxc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index c5dcbbb..7fb1d5f 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -520,8 +520,10 @@ static int fec_open(struct eth_device *edev)
 static int fec_init(struct eth_device *dev, bd_t* bd)
 {
 	struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#if !defined(CONFIG_MX6UL)
 	uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
 	int i;
+#endif
 
 	/* Initialize MAC address */
 	fec_set_hwaddr(dev);
@@ -551,12 +553,14 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
 	writel(0x00000000, &fec->eth->gaddr2);
 
 
+#if !defined(CONFIG_MX6UL)
 	/* clear MIB RAM */
 	for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
 		writel(0, i);
 
 	/* FIFO receive start register */
 	writel(0x520, &fec->eth->r_fstart);
+#endif
 
 	/* size and address of each buffer */
 	writel(FEC_MAX_PKT_SIZE, &fec->eth->emrbr);
-- 
1.8.4