[U-Boot] [PATCH v2 10/10] x86: crownbay: Enable CONFIG_PCH_GBE

Bin Meng bmeng.cn at gmail.com
Thu Aug 27 17:43:09 CEST 2015


Hi Joe,

On Wed, Aug 26, 2015 at 11:31 PM, Bin Meng <bmeng.cn at gmail.com> wrote:
> Hi Joe,
>
> On Wed, Aug 26, 2015 at 11:25 PM, Joe Hershberger
> <joe.hershberger at gmail.com> wrote:
>> Hi Bin,
>>
>> On Wed, Aug 26, 2015 at 8:17 AM, Bin Meng <bmeng.cn at gmail.com> wrote:
>>> Now that we have converted the pch_gbe driver to driver moel,
>>> enable it on Intel Crown Bay board.
>>>
>>> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>>> Acked-by: Simon Glass <sjg at chromium.org>
>>>
>>> ---
>>>
>>> Changes in v2:
>>> - Remove CONFIG_PHYLIB from crownbay.h
>>>
>>>  configs/crownbay_defconfig | 1 +
>>>  include/configs/crownbay.h | 3 ---
>>>  2 files changed, 1 insertion(+), 3 deletions(-)
>>>
>>> diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
>>> index f027faf..f328159 100644
>>> --- a/configs/crownbay_defconfig
>>> +++ b/configs/crownbay_defconfig
>>> @@ -21,6 +21,7 @@ CONFIG_DM_PCI=y
>>>  CONFIG_SPI_FLASH=y
>>>  CONFIG_DM_ETH=y
>>>  CONFIG_E1000=y
>>> +CONFIG_PCH_GBE=y
>>>  CONFIG_VIDEO_VESA=y
>>>  CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
>>>  CONFIG_USB=y
>>> diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
>>> index a344c85..3153a74 100644
>>> --- a/include/configs/crownbay.h
>>> +++ b/include/configs/crownbay.h
>>> @@ -49,9 +49,6 @@
>>>  #define CONFIG_MMC_SDMA
>>>  #define CONFIG_CMD_MMC
>>>
>>> -/* Topcliff Gigabit Ethernet */
>>> -#define CONFIG_PHYLIB
>>> -
>>
>> Since you added the PHYLIB config to the Kconfig, you need to run the
>> moveconfig.py tool to convert all boards so there is not a conflict
>> between the 2 config approaches.
>>
>
> Since it is default n, so I believe there should be no conflicts. I
> thought moveconfig causes lots of changes, which might be risky at
> this time for this release? Do you think we can leave the PHYLIB
> moveconfig to next release? But I may be wrong, e.g. I should trust
> the moveconfig tool ;-)
>

Please let me know if you want me to update all boards' header and
defconfig files with moveconfig for PHYLIB for this release.

Regards,
Bin


More information about the U-Boot mailing list