[U-Boot] [PATCH v2 0/7] BAR/wait_ready logic updates

[Jagan Teki]

On 18 August 2015 at 10:12, Bin Meng <bmeng.cn at gmail.com> wrote:
> Hi Jagan,
>
> On Mon, Aug 17, 2015 at 6:32 PM, Jagan Teki <jteki at openedev.com> wrote:
>> BAR and spi_flash_cmd_wait_ready are updated to make more
>> module to add new status checks.
>>
>> Changes for v2:
>> - Update bank_sel for non-bar case.
>> - split the spi_flash_cmd_wait_ready logic into SR and FSR patches.
>>
>> Clone spi-nor branch u-boot-spi.git repo for changes
>> http://git.denx.de/?p=u-boot/u-boot-spi.git;a=tree;h=refs/heads/spi-nor;hb=refs/heads/spi-nor
>>
>> Jagan Teki (7):
>>   spi: zynq_spi: Remove unneeded headers
>>   sf: Return proper bank_sel, if flash->bank_curr == bank_sel
>>   sf: Make BAR discovery, as spi_flash_read_bar
>>   sf: Optimize BAR write code
>>   sf: Make flash->flags use for generic usage
>>   sf: Update status reg check in spi_flash_cmd_wait_ready
>>   sf: Add FSR support to spi_flash_cmd_wait_ready
>>
>>  drivers/mtd/spi/sf_internal.h |   5 ++
>>  drivers/mtd/spi/sf_ops.c      | 151 +++++++++++++++++++++---------------------
>>  drivers/mtd/spi/sf_probe.c    |  64 ++++++++++--------
>>  drivers/spi/zynq_spi.c        |   6 +-
>>  include/spi_flash.h           |   6 +-
>>  5 files changed, 121 insertions(+), 111 deletions(-)
>>
>> --
>
> Unfortunately with this series the SF flash was broken on Crown Bay.
> Please take a look.

Please specify which sort of error it is from, "Timeout" form
wait_ready or something.

thanks!
-- 
Jagan | openedev.