[U-Boot] [PATCH] drivers/ddr/fsl: Adjust bstopre value

[York Sun]

On 07/23/2015 02:04 PM, York Sun wrote:
> By default the bstopre value has been set to 0x100, used to be 1/4
> value of refint. Modern DDR has increased the refresh time. Adjust
> to 1/4 of refresh interval dynamically. Individual board can still
> override this value in board ddr file, or to use auto-precharge.
> 
> Signed-off-by: York Sun <yorksun at freescale.com>
> ---

Applied to u-boot-fsl-qoriq master.

York