[U-Boot] [PATCH v2] at91: corvus: board updates

[Heiko Schocher]

rename at91_spl_board_init into spl_board_init

Signed-off-by: Heiko Schocher <hs at denx.de>
---

Changes in v2:
- rebase to 0d339cf9a969f0c249713d3697e735184f1bd955
- use SZ_xM defines

 board/siemens/corvus/board.c |  2 +-
 include/configs/corvus.h     | 22 +++++++++++-----------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index 426d0cd..7d15317 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -77,7 +77,7 @@ static void corvus_nand_hw_init(void)
 #include <spl.h>
 #include <nand.h>
 
-void at91_spl_board_init(void)
+void spl_board_init(void)
 {
 	/*
 	 * For on the sam9m10g45ek board, the chip wm9711 stay in the test
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 2bad20f..fe16783 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -15,6 +15,7 @@
 #define __CONFIG_H
 
 #include <asm/hardware.h>
+#include <linux/sizes.h>
 
 #define CONFIG_SYS_GENERIC_BOARD
 /*
@@ -81,7 +82,7 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
 
 /* No NOR flash */
 #define CONFIG_SYS_NO_FLASH
@@ -128,7 +129,7 @@
 #define CONFIG_DFU_NAND
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 << 20)
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 
 /* USB DFU IDs */
@@ -136,15 +137,14 @@
 #define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
 #define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
 
-#define CONFIG_SYS_CACHELINE_SIZE	0x2000
-/* fuer was das ? */
+#define CONFIG_SYS_CACHELINE_SIZE	SZ_8K
 #define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x100000
 #define CONFIG_ENV_OFFSET_REDUND	0x180000
-#define CONFIG_ENV_SIZE			0x20000
+#define CONFIG_ENV_SIZE			SZ_128K
 
 #define CONFIG_BOOTCOMMAND						\
 	"nand read 0x70000000 0x200000 0x300000;"			\
@@ -171,15 +171,15 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + \
-				4*1024*1024, 0x1000)
+				SZ_4M, 0x1000)
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
-#define CONFIG_SPL_MAX_SIZE		(12 * 1024)
-#define CONFIG_SPL_STACK		(16 * 1024)
+#define CONFIG_SPL_MAX_SIZE		(12 * SZ_1K)
+#define CONFIG_SPL_STACK		(SZ_16K)
 
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_BSS_MAX_SIZE		(2 * 1024)
+#define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -199,8 +199,8 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE	SZ_2K
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(SZ_128K)
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-- 
2.1.0